All Activity

It works here on official Pale Moon and uBlock-for-firefox-legacy by UCyborg. I can reach the URL: https://www.void.gr/kargig/void-gr-filters.txt

How much memory does wfw support? And system resources?

Something unusual seems to be going on with the Greek AdBlock Filter (included in the Regions, languages section). The link to the filterlist stopped working since a few days. It also stopped working on Firefox/WebExtension (same link). As of today however, it works on FF again but not on UXP browsers/uBO Legacy. This alternative URL found on filterlists.com seems to work fine. Not sure why this happens.

I would like to inform MSFN members that Chrome 124 (and Edge 124) has enabled the "X25519Kyber768Draft00" Hybrid Post Quantum Key + QUIC to default. It will almost certainly be enabled by default in future versions of Firefox as well. In Firefox Nightly it is already at default. I remind you that QUIC is already enabled by default in Firefox. Test: https://pq.cloudflareresearch.com/ Some problems: https://www.bleepingcomputer.com/news/security/google-chromes-new-post-quantum-cryptography-may-break-tls-connections/ I have been experimenting with the Hybrid Post Quantum Key since Jan. 19, 2024, even in Firefox, and have yet to detect any problems loading websites. I also performed CPU + Layout/sec measurements of website loading with the Hybrid Post Quantum Secure Key + QUIC. MSFN members who do not like the Hybrid Post Quantum Key enabled + QUIC are required to set the flags to the "disabled" value.

Sometimes the "not a valid win32 app" error is nothing more than then .exe not properly "signed".

With "Show only when no keyboard attached" option OSK button is always visible - with keyboard attached and also unattached, on Windows version 22631.3447, app 3.7.9. When I turn off the "enhanced classic taskbar" and in windows settings set OSK button to same option it works properly - so it's probably bug in the app (changing option in windows settings with the enhanced taskbar on has no impact, keyboard button is always visible).

Man, is this what you were looking for? C:\DCI. ├───DISK1 │ │ LICENSE.DOC │ │ LOADBMP.DOC │ │ README.TXT │ │ SPEC16.DOC │ │ │ └───DEVKIT │ ├───BIN │ │ DCIMAN.DLL │ │ DCISVGA.DRV │ │ DVA.386 │ │ ICCVID.DRV │ │ IR32.DLL │ │ MSVIDEO.DLL │ │ UDH.DLL │ │ │ ├───INC │ │ COMPDDK.H │ │ DCIDDI.H │ │ DCIMAN.H │ │ │ ├───LIB │ │ DCIMAN.LIB │ │ │ └───SAMPLE │ ATI68800.ASM │ BRESNHAM.C │ CBLIT.ASM │ CLIPBLIT.C │ CONVERT.ASM │ DCIENTRY.C │ DCIEXFNS.C │ DCIHDW.C │ DCIHDW.H │ DCIMACRO.INC │ DCISAMP.C │ DCISAMP.DEF │ DCISAMP.RC │ DEBUG.H │ GDIDEFS.INC │ MAKEFILE │ READNDX.ASM │ STRBLIT.ASM │ STUBAPI.ASM │ VALIDBMP.C │ VERSION.H │ VERSION.RCV │ ├───DISK2 │ LOADBMP.DLL │ TDCITEST.EXE │ TMCIAVI.EXE │ └───VFW11DRT ACMCMPRS.DL_ AVICAP.DL_ AVIFILE.DL_ CLEANUP.RE_ COMPOBJ.DL_ CTL3D.DL_ DCISVGA.DR_ DISPDIB.DL_ DVA.38_ ICCVID.DR_ IMAADPCM.AC_ INIUPD.DL_ IR21_R.DL_ IR32.DL_ MAP_WIN.HL_ MCIAVI.DR_ MCIOLE.DL_ MPLAYER.EX_ MPLAYER.HL_ MPLAYER.RE_ MSACM.DL_ MSACM.DR_ MSADPCM.AC_ MSCOMSTF.DL_ MSCPYDIS.DL_ MSCPYDIS.IN_ MSCUISTF.DL_ MSDETECT.IN_ MSDETSTF.DL_ MSINSSTF.DL_ MSRLE.DR_ MSSHLSTF.DL_ MSUILSTF.DL_ MSVIDC.DR_ MSVIDEO.DL_ OLE2.DL_ OLE2.RE_ OLE2CONV.DL_ OLE2DISP.DL_ OLE2NLS.DL_ OLE2PROX.DL_ PROFDISP.EX_ SETUP.EXE SETUP.INI SETUP.IN_ SETUP.LST SETUP.MST SETUPAPI.IN_ STDOLE.TL_ STORAGE.DL_ TYPELIB.DL_ _MSSETUP.EX_ _MSTEST.EX_

Nothing is necessary, I already understood how to do it. Thanks for the tip. The reason is quite obvious - the name is long and the last letters of the name are still not visible: I just wanted to make the name a little shorter. RamDrive for example fits: I have only one RamDisk on the system, so it's hard to confuse anything.

Yes. But I assume "label" command does its work still... If you will point me why do you need variable label when driver create volume I do option for this. > Do you need a separate 16-bit client? No. Drive can or can not be mounted before. readme related options: - checking for third-party drives in memory at start address: "CheckExternalVolume"=hex:FF enabled by default. If a drive is detected, there are two options (by configuration) - it is either used or left under the control of the of the old software, with use option enabled by default: "GrabRMVolume"=hex:FF "GrabExternalVolume"=hex:FF. The first parameter defines the use of known DOS drives (e.g. RAMDSK32/64), the second - all other drives (no examples yet) i.e. GrabRMVolume - use DOS mounted drive, GrabExternalVolume - use unmounted volume, no matter how it was loaded into memory

Hello. Is there a standard way to assign a different default name? I changed the name several times in the disk properties, but it is not saved and each time from a cold start it is assigned the original one. Is it hardwired somewhere deep in the driver code? I tried changing everything I found in the registry, but also to no avail. Another question concerns access from DOS to a previously created disk under WINDOWS. Do you need a separate 16-bit client?

I can confirm this so the last working version for W7 is the 119

and if you want cheaper, you may try some VT6421/VT6421a based cards, some of them having a PLCC LPC Flash chip socketed/soldered.

Check the connections with this: about:networking It is impossible to disable, after FF 99, from "about:config" CSP reports. Test: https://apps.armin.dev/ping-spotter/ P.S. I personally changed this (but not only): network.captive-portal-service.enabled - false

Tools\Win10Builds.ini

@JFX Where do you take the names from from in a specified wim file such as the leaked w11 LTSC version? WinNTsetup shows Windows 11 Enterprise LTSC Canary, but DISM /get-wiminfo doesn't show Canary.

Hello there. i was wondering if it was possible to make a new browser for windows 3.1 or specifically : windows for workstations 3.11. i am wanting to do this because i realized, that there is no modern web browser for wfw 3.11. the only ones i could find where from dos and i couldn't get them to work. i also think it would be easier if it would run directly under windows 3.11. the problem : i have never programmed anything in my life. so i would need lots of help. i tried googeling it, but i couldn't find anything for windows 3.11. i have a virtual machine with internet access set up too in case of need or testing (wfw 3.11). I don't have real hardware at the moment because i'm in Japan. i will try my best to learn everything neccecarry to make it work !!!! all help would be appreciated. -enderlais PS English is not my mother language so I'm sorry if it may be difficult to read, my main language is German. (you can correct my gramer if you want)

Same here. Just downloaded. Will be a weekend or two before I get around to trying it out.

And Facebook... ?

@66cats...Good idea, I was thinking of modding the INF file with the 1030 card to see what would happen. It would be better to compare drivers to see what has changed. I tried plugging into the mobo but the problem was in the BIOS. I had activated the iGPU setting for dual monitors and for some reason it was skipping display during POST. Shorted the pins on mobo to reset BIOS (be sure power is off and power cable unplugged). With BIOS reset the display returned. Then I got other issues, an 0xC0000005 type error (something like STOP: 0x0000008E). When I reset BIOS I left the mobo security feature active and I have an old copy of softice loaded. It loads Windows on top of itself and the security feature did not like that. So, I disabled the Safe Boot feature by deleting Safe Boot keys in BIOS and all is well. I knew that BIOS replaces them if you reset it but I saved a set anyway.. My initial problem with no display was due to a faulty system hive in registry. It was so corrupt I could not delete it yet it looked fine viewing it with an external registry viewer. I think it was chkdsk deleted it for me. Fortunately I had a decent backup from 2021 and it ran fine, right to desktop.

Listviews group header text color is back to dark blue on dark mode. Was good with SAB 3.7.3.

The point of that setting (the one on normal Settings page, not page with flags) is to prevent the web pages to be able to do anything with WebUSB. https://intel.github.io/zephyr.js/webusb/ You'd have to implement another flag or setting in any other shape if you wanted to turn the backend off.

@Mathwiz AFAIK, Supermium is mostly done like this. The point is you get the binary optimized the best as possible for every OS it targets.

It looks like all msstyles edits were removed with the latest update of StartAllBack?

So solid! Hopefully with the new reorganization and Panos Panay out things will get better. Panos is a hardware guy and never should have been in charge of Windows as much as I love Surface. They also got rid of the Bing ads guy that was running Windows for like a month. I guess start menu ads are a holdover from his tenure.

Agree with you ...