Jump to content

nitroshift

Patron
  • Posts

    2,861
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Romania

Everything posted by nitroshift

  1. You can see what the DHCP server says by looking at the IP address you are given. DHCP servers don't communicate with clients in other ways but assign IP addresses.
  2. ...or ask the previous owner you bought it from
  3. USB modems suck big time.... And they`re a PITA to set up. That's why I went with a RJ45 modem Had to pay a bit but it's worth every single cent!
  4. You need to put the line DEVICE=C:\NEWTON\TSIVID.386 in the SYSTEM.INI file under the [386ENH] section.
  5. nLite is able to create a ISO file of your install cd that you can burn with Nero and boot off it.
  6. punto, i think ripken was thinking about linking a router with a built-in switch to the dsl modem and share the connection that way. this is actually my set-up at home.
  7. You can use the net send command or have a small script built around it...
  8. AFAIK you can't set text files as thumbnails, but then again, I might be wrong...
  9. You can make it a .pdf file and apply whatever security level you want.
  10. http://us1.trymicrosoftoffice.com/
  11. First off install KB888111 from Microsoft. That enables the High Definition Support needed by the audio driver to get installed.
  12. All you need to know (and act upon) is located here: http://www.msfn.org/board/index.php?showtopic=42699
  13. Enable ACPI in BIOS and do a repair install of Windows.
  14. AFAIK, you can't have IPv6 and IPv4 active at the same time. And your clients must recognise the IPv6 if you want to go ahead with it.
  15. Get either Acronis True Image or Norton Ghost and create an image of your partition which you can later burn onto a DVD or save onto an external HDD.
  16. Office 2007 all the way. (You can save docs in pdf too )
  17. Have you checked in Event Viewer what causes the error?
  18. Have you looked in "Sent Items"? EDIT: Welcome to msfn
  19. 1. http://en.wikipedia.org/wiki/ISO_image 2. Any burning software will help you
  20. You know, too much work can be harmful
  21. Another vote for TCPView.
  22. I beg to differ ripken. He will need those drivers even if the hdd is single but setup as s-ata. @bonestonne On the mobo CD you'll find an executable to setup a floppy that you'll need at the F2 stage during the windows install.
  23. Same as you: 1280x1024, all the rest is set at maximum.
  24. Am I right cluberti?
×
×
  • Create New...