Maximus-Decim Native USB Drivers

[ashgir]

Hi Maximus,

That is a master-piece!!

Just would like to feedback to you, that it should be allowed to unplug the USB drive after right-click the drive in Windows Explorer and in the drop-down menu then click Eject. When we do that, your driver will come up with "Unsafe Removal of Device" popup. Would be great if this can be corrected.

<{POST_SNAPBACK}>

Thanks to sunamigaza for the SUBSTOR.INF.

Unfortunately there is no reply from Maximus regarding the possibility of using "Eject" as described in my message above.

Has someone else any idea?

Maximus Decim Native USB ver.3.3

------------------------------------------------------------------------

*Native (without installation of additional drivers for each type) support USB flash drives, digital photo

and videocameras and other similar devices.

*Universal Stack USB 2.0 (without installation of additional drivers for each chipsets) with uninstall.

1.Remove ALL drivers USB flash drives.

2.Remove ALL drivers USB 2.0 controllers.

3.Remove ALL unknown devices.

4.Install NUSB 3.3 and reboot.

5.After detection new USB 2.0 controllers (if it will occur) too it is necessary to be reboot.

Remember! You install it at own risk!

-----------------------------------------------------------------------------------------------------------------------

English: http://rapidshare.com/files/70087438/nusb33e.exe.html

Russian: http://rapidshare.com/files/70087290/nusb33r.exe.html

What's new?

*Add CDVSD.VXD 4.90.3004

*USBSTOR.INF 1.08 - add EKE USB Floppy (VID_0424&PID_0FDC), add USBCompliance (for usbu2a.sys), small fix for USB FDD

Maximus Decim Native USB ver.3.2

------------------------------------------------------------------------

English: http://rapidshare.com/files/66648662/nusb32e.exe.html

Russian: http://rapidshare.com/files/66648597/nusb32r.exe.html

What's new?

*Add USB FDD + DISKTSD.VXD 4.90.3001

*Fix USB2.INF for ATI chipsets

*explorer.exe ver 4.72.3612.1700

Maximus Decim Native USB ver.3.1

------------------------------------------------------------------------

English: http://rapidshare.com/files/19858514/nusb31e.exe.html

Russian: http://rapidshare.com/files/19858375/nusb31r.exe.html

What's new?

*Downgrade USBSTOR.SYS (4.90.3000.1), removed wdmstub.sys

*CnMemore replaced Skymedi

Edited June 7, 2008 by ashgir

[ashgir]

I have recently bought Zaapa USB card reader/writer for SD mini SD and MMC cards.

My computer is DELL XPS D300Mhz PII. My OS is Win98 English.

The dealer of Zaapa sent me Maximum Decim Native driver V3.2 for Win98FE.

I installed the driver to C:\Windows directory.

During the installation I notice an error message INF File "\_nusb.inf" not found.

But the installation proceeded successfully.

Although the USB green light stays on lighting, I cannot see the icon of the USB in MyComputer.

It looks that the system still doesn't recognize the USB card reader/writer.

Could you advise if there is anyhting which can be done to rectify this problem?

Thanks

[aqcww]

hi,everyone

How to make it run under Chinese evironment?my system is Chinese language.

today i tried to setup it(English ver),but my system was dead after that......re-setup....

so,what can i do?should i replace user.exe and user.dll?where can i download them?

thanks a lot

Edited June 8, 2008 by aqcww

[Kelsenellenelvian]

hi,everyone

How to make it run under Chinese evironment?my system is Chinese language.

today i tried to setup it(English ver),but my system was dead after that......re-setup....

so,what can i do?should i replace user.exe and user.dll?where can i download them?

thanks a lot

Why are you so angry when you where the one that tried an english patch on a chinese os?

[aqcww]

hi,everyone

How to make it run under Chinese evironment?my system is Chinese language.

today i tried to setup it(English ver),but my system was dead after that......re-setup....

so,what can i do?should i replace user.exe and user.dll?where can i download them?

thanks a lot

Why are you so angry when you where the one that tried an english patch on a chinese os?

what should i do?

[PROBLEMCHYLD]

you might want to update your pack with this

Unofficial MS-DOS 5/6/7/8 + Windows 3.1x/9x/ME Panasonic native DOS USB driver USBASPI.EXE (USBASPI.SYS) 2.24 Fix

Also do you think its possible to add newer Winxp drivers to the pack.

Edited December 7, 2008 by PROBLEMCHYLD

[Philco]

you might want to update your pack with this

Unofficial MS-DOS 5/6/7/8 + Windows 3.1x/9x/ME Panasonic native DOS USB driver USBASPI.EXE (USBASPI.SYS) 2.24 Fix

Links? Thx.

[dencorso]

See the top post in the updates sticky... it's findable at MDGx's now.

[Steven W]

I have an Olympus C3030 Zoom digital camera. To get images off of the camera I supposedly need to install Olympus's Camedia software. I ran across this recently:

http://groups.google.com/group/de.alt.rec....4eca67343d36ab1

It's for XP, mentions opening srusbusd.inf in notepad and removing some semicolons. It looks to me you could fix more than Olympus cameras. Are these cameras supported using your native USB drivers? If not could they be added?

[erpdude8]

Hmmm .....

NUSB 3.12 Beta for Windows 98 1st Edition have been released !

Please refer to post #350 : http://www.msfn.org/board/?showtopic=43605&st=349 for changes/updates/reports.

Rgds

Hi PassingBy. The link to "post $350" is no longer working.

I've just received my cousin's old eMachine computer that has built-in USB ports [one in front and one in the back of the PC] and will test out your NUSB98FE package I obtained from MDGx's web site. I'll have to install the Win98 FE OS and the Intel chipset drivers before I proceed with NUSB98FE.

[barbarien]

Why the explorer.exe 4.72.3612.1700 is included in NUSB 3.3

and what is patched ?????

[PassingBy]

Hmmm .....

Hey there erpdude8 ,

I'm in a bit of a tight schedule right now ... and away from my dev systems ...

If you could hold out just for another couple of days or so, I'll post an updated pack to match the latest NUSB by Maximum-Decim ... It's already been tested for months now on several W98FE systems but I haven't gotten round to include an un-install routine yet ... That's on the to-do-list ...

I apologise for being lame and not having the updated pack posted much earlier ...

@barbarien:

The explorer is the pretty much the same used in nusb33e (maybe some resource is different here and there but definitely no code patches were done). So, no major differences there. It's there to handle usb insertion messages correctly ...

Rgds

[barbarien]

what is when i overwrite these explorer.exe with the one from

dr.hoiby 4.72.3612.1710 ?? explor98 patch

and i found another version of 4.72.3612.1700

here --- http://support.microsoft.com/kb/246073/de

im now a bit confused

the original win 98se is 4.72.3110.1

[Multibooter]

nusb v3.3 is entered in Win98SE Add/Remove as "Remove Unofficial Universal USB 2.0 Stack". What does uninstall exactly do and not do?

[dencorso]

It just removes the Universal USB 2.0 Stack (cf post #1), probably to give people the chance to uninstall it before installing either Sis or VIA USB 2.0 Stack. It does not remove the core NUSB files. You can remove NUSB from DOS by hand. But most of the files not directly related to USB don't need to be removed in any scenario I can envisage. Then again, YMMV.