UCyborg Posted May 21, 2024 Posted May 21, 2024 64-bit version of PuTTY 0.81 needs hex editing to get running on XP x64 as minimum OS version specified in the PE header is 6.0 (Vista) instead of 5.2 (XP x64 / Server 2003).
mockingbird Posted May 22, 2024 Posted May 22, 2024 On 3/19/2024 at 12:23 PM, bluebolt said: XP compatibility was lost at version 10.2.1 (followed by 10.2.2 and 10.3). As I tried to convince AOMEI to restore XP compatibility, they sent me a direct link to version 9.0: http://www2.aomeisoftware.com/download/pa/full/9.0/PAssist_Setup.exe I swapped "10.2.0" for "9.0" for a direct download link to version 10.2.0: http://www2.aomeisoftware.com/download/pa/full/10.2.0/PAssist_Setup.exe
George King Posted May 22, 2024 Posted May 22, 2024 (edited) 6 hours ago, mockingbird said: I have saved Partition Assistant 10.1.0.0 which I know works fine under XP and installer was obtained under XP before the dropped support. https://www.mediafire.com/file/w4s3a5eynl4nsu5/PartitionAssistant-all.exe/file Can be installed silently with /silent switch P.S. Full version require just correct cfg.ini in installation directory. Edited May 22, 2024 by George King 1
dmiranda Posted May 23, 2024 Posted May 23, 2024 (edited) On Wed May 22 2024 (GMT+0000) at 8:37 AM, George King said: P.S. Full version require just correct cfg.ini in installation directory. Hi there. I still get the same error than when extracting the setup previously provided in this thread: "You need to install AOMEI Partition Assistant on the computer to run.If you want to run the program without installation, it is recommended to create a Portable Version, then you can run the Portable AOMEI Partition Assistant on other computers without installation." Short of someone being able to create a portable version, I wonder if the issue is in AmAnacfg.ini, with contents that (in my system) are not being created on install (probably due to the program stopping after the above error).. usercfg=C:\Users\All Users\Application Data\AomeiBR\usercfg.ini Cache=C:\Users\All Users\Application Data\AOMEIPA\PA_OF.dat Address=https://a.aomeisoftware.com/api/v1/soft/collect Thanks! Edited May 23, 2024 by dmiranda
George King Posted May 24, 2024 Posted May 24, 2024 (edited) On 5/23/2024 at 5:48 PM, dmiranda said: Hi there. I still get the same error than when extracting the setup previously provided in this thread: "You need to install AOMEI Partition Assistant on the computer to run.If you want to run the program without installation, it is recommended to create a Portable Version, then you can run the Portable AOMEI Partition Assistant on other computers without installation." Short of someone being able to create a portable version, I wonder if the issue is in AmAnacfg.ini, with contents that (in my system) are not being created on install (probably due to the program stopping after the above error).. usercfg=C:\Users\All Users\Application Data\AomeiBR\usercfg.ini Cache=C:\Users\All Users\Application Data\AOMEIPA\PA_OF.dat Address=https://a.aomeisoftware.com/api/v1/soft/collect Thanks! I installed it normaly and it works, have not tried anything related to portable. Edited May 24, 2024 by George King
flusspferd Posted June 6, 2024 Posted June 6, 2024 (edited) Gnuplot 5.07 ( gp507-win32-mingw.7z ) from Sourceforge, FreeBasic 1.10.1 ( FreeBASIC-1.10.1-win32.7z) also from Sourceforge and Geany 1.31 (geany-1.31_setup.exe ) could make us busy for a loong time There are many gnuplot demos at http://www.gnuplot.info/demo_4.6/ . For some of the gnuplot examples it is necessary to provide own .dat files. nano 2.2.6 ( https://www.nano-editor.org/dist/v2.2/NT/ ) can create these Edited June 6, 2024 by flusspferd typo
dmiranda Posted June 8, 2024 Posted June 8, 2024 On Fri May 24 2024 (GMT+0000) at 10:26 AM, George King said: I installed it normaly and it works, have not tried anything related to portable. It's gotta be something with my nlited setup. I have v5 full, so I'm ok. I just wanted to try any different functionality. Cheers!
genieautravail Posted June 19, 2024 Posted June 19, 2024 The latest version of Honeyview doesn't works anymore with XP. https://en.bandisoft.com/honeyview/ The last version working with XP is 5.50. 1
AstroSkipper Posted June 19, 2024 Posted June 19, 2024 1 hour ago, genieautravail said: The latest version of Honeyview doesn't works anymore with XP. https://en.bandisoft.com/honeyview/ The last version working with XP is 5.50. Thanks for the heads up! 4
LordGarfio Posted June 22, 2024 Posted June 22, 2024 (edited) Bandisoft HoneyView v5.53 Freeware Portable for Windows XP [5.75 MB] Bandisoft_HoneyView_v5.53_Freeware_Portable_XP.zip FastCopy x32 v5.7.14 for Windows XP [2.26 MB] FastCopy_x32_v5.7.14_XP.zip Cheers. Edited June 22, 2024 by LordGarfio 2
genieautravail Posted June 23, 2024 Posted June 23, 2024 (edited) @LordGarfio Thank you for the links. But, please, don't use NitroFlare for files uploading. It's a pain to download the files from this site. You can use PixelDrain by example. Do you are the creator of these mods ? Regards Edited June 24, 2024 by genieautravail
AstroSkipper Posted June 23, 2024 Posted June 23, 2024 29 minutes ago, genieautravail said: @LordGarfio Thank you for the links. But, please, don't use NitroFlare for files uploading. It's a pain to download the files from this site. You can use PixelDrain for example. Do you are the creator of these mods ? Regards Yep! There are indeed some file hosters which are much easier to access than NitroFlare, without those extreme limitations. And I also would like to know who the creator is. Anyway! Thanks for the links, @LordGarfio! 1
LordGarfio Posted June 23, 2024 Posted June 23, 2024 42 minutes ago, AstroSkipper said: Yep! There are indeed some file hosters which are much easier to access than NitroFlare, without those extreme limitations. And I also would like to know who the creator is. Anyway! Thanks for the links, @LordGarfio! Nitroflare was used because they retain files for long periods of time, even years. Thanks to you AstroSkipper
LordGarfio Posted June 23, 2024 Posted June 23, 2024 (edited) 1 hour ago, genieautravail said: @LordGarfio Thank you for the links. But, please, don't use NitroFlare for files uploading. It's a pain to download the files from this site. You can use PixelDrain for example. Do you are the creator of these mods ? Regards I know very well, Nitroflare is very difficult to download and slow. You can mirror it :-) Edited June 23, 2024 by LordGarfio
genieautravail Posted June 24, 2024 Posted June 24, 2024 (edited) @LordGarfio OK ! But are you the creator of the files ? Regards Edited June 24, 2024 by genieautravail
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now