Jump to content
MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. ×

WinNTSetup v4.6.5 / v5.0 Beta 3


JFX
 Share

Recommended Posts

20 hours ago, JFX said:

Glad it works now. This slow down with Defender is a bit extreme.
But i guess an option to disable realtime monitoring during capture would properly cause one more false positive.

Yes, I am happy too that VSS Capture using WimGAPI and having Defender switched off is bringing success :thumbup

Defender is slowing down the VSS Capture by at least a factor 7 so that it really safes a lot of time when Defender is disabled during Capture.

I think that switching off Defender in case of VSS Capture can solve problems.

Edited by wimb
Link to comment
Share on other sites

  • 1 month later...

  • 1 month later...
  • 2 weeks later...
On 1/31/2011 at 2:49 PM, JFX said:

Features:

 

  • - Install Windows 2k/XP/2003/2008/2012/Vista/7/8.x x86/x64
  • - Practically runs even on the most minimalistic WinPE
  • - Choose able drive letter for the new Windows installation
  • - Install Windows also if nlite/vlite has remove winnt32.exe/setup.exe
  • - Integrate Drivers: normal PNP and Textmode Drivers also
  • - patch uxtheme to allow unsigned Themes
  • - Some tweaks
  • - Support "Windows to Go" for Windows 7 and later installs
  • - Supports WimBoot option for Windows 8.1 Update 1
  • - supports all current WIM files: WIM/SWM (XPRESS / LZX / XPRESS HUFFMAN = Wimboot compression)
  • - supports unencrypted ESD files (LZMS compressed WIM)

 

Not Supported:

 

  • - No Windows embedded version (this includes WinFLP)
  • - No Installation onto USB disk *New* only Windows 7 and later
  • - No upgrades of existing installations

 

As some may know the last version 1.5 had only Support for Win 2000/XP/2003.
Fujianabc present an very easy approach to install Windows 7 NT 6.x fast installer

basically it's simply applying the windows image from install.wim and generating the boot files.
He also discovered that the drive letter of a Windows 7 image can be (opposed to Vista) easily changed.
So I have added that way of installing to WinNTSetup.



For the driver installation:

Every driver added in NT6.x windows will be added to the driver store.
So it's not recommended to add countless driver, but rather more really required ones.

NT5.x massstorage driver integration is possible thanks to Mr dUSHA powerful MSSTMake.exe tool

To the Unattend option:

It's possible to use an unattend.xml to run the Setup unattended.
But as the actual WinPE Setup Phase isn't effective in that way of install, all Winpe related settings inside the unattend.xml
won't be applied.

Ini config file

It's possible to save all GUI-settings to a ini file:

push Ctrl + S to save all settings to an ini.
push Ctrl + L to load all settings from an ini.

A WinNTSetup.ini file in the same dir as the app itself will be loaded automatically at startup.

It also can be selected via command line:

WinNTSetup.exe /cfg:"C:\mysettings.ini"

more command line options

 

  Reveal hidden contents

 

- nt6, nt5 or vhd have to be the first parameter all other don't require any order
- does not matters if -paramter or /Parameter
- give paths can be relative (to WinNTSetup_x??.exe)
- if a path includes spaces enclose it with " "

- nt6 or nt5 - will let winntsetup know which os to install (nt6: for vista and later, nt5 for XP/2003)

- /source:(path) - defines the installation sources (for nt5 the root of the windows CD, for nt6 the install.wim file)
- /syspart:(driveletter:) - defines the driveletter you want as boot drive
- /tempdrive:(driveletter:) - defines the driveletter you want as installation drive

- /unattend:(file) - defines the path of the unattend file (winnt.sif or unattend.xml)
- /drivers:(path) - defines the path to a drivers folder you want to use
- /wimindex:n - defines the edition inside install.wim which should be installed beginning with 1 (like in the combo box Edition)

- /setupwait - will push the setup button and show you the proceed page
- /setup - will start the setup
- /reboot - will automaticly reboot 30 seconds after setup finished

- /forceunsigned - (only for installing Windows 7) will let the driver integration accept unsigned drives
- /testsigning - will set testsigning flag for the new Windows installation
- /disableuac - will disable User Account Control

- /Sysletter:{Letter} - will define the systemdrive letter the new windows installation will have
- /SaveDriveLetters - will save the current driveletter assaignment for the new windows installation
- /Uxtheme - will patch the uxtheme related dll's to enable the use of custom msstyles files
- /nobootsect - will not update BootSector and Master Boot Record

- /DisableHiberBoot - disable the fast boot feature of Windows 8, that can cause trouble in multiboot enviroments
- /DisableHibernate - disable the hibernate functions
- /DisableSystemRestore - disable the system restore functions
- /DisablePagefile - disable the virtual memory and the pagefile.sys file
- /DisableSFC - disable the system file protection of windows xp
- /RunAfter:{command} - will run a command before reboot

- /OEM:(path) - defines a custom $OEM$ folder

- /DisableVHDChecks - Disables all setup checks for VHD partitions

- /cfg:{inifile} - load settings from ini file

- /lng:nnnn - loading a different language file
- /bcd:{type} - select the firmware type to be set with bcdboot {ALL | BIOS | UEFI}

- /wimboot - will not apply the install.wim, but instead create pointer files


- /compact:{type}     - uses system comprresion of Windows 10
 [xpress4k | xpress8k | xpress16k | lzx}

- /wimlib - will use wimlib instead of wimgapi to handle wim files,
 requires to have wimlib dll files inside Tools\x??\wimlib

- /regtweaks:(path) - let you set a folder with *.reg files that will be merged into the installation

- /noreg - does not make any changes to the registry of the new windows installation

- /ref:{filter} - disables interal search for reference WIMs and uses a custom filter

- /wbc:{wimboot.ini} - use a custom wimbootcompressed.ini for Wimboot

- /timeout:{n} - use a custom timeout for the bootmenu (default = 30)


- vhd-create

- /File:{path} - defines the full path for the new VHD file
- /Size:{size} - defines the size in MB or GB (ex. 25600MB or 25GB)
- /Type:{type} - defines the type of VHD: fixed, expandable or fixedfast

---- optional ----

- /Label:{Label} - label for the vhd partition
- /Alig:{Alig} - Allignment (32|64|128|256|512|1024|2048) of the partition
- /Allo:{Allo} - Allocation unit (512|1024|2048|4096|8192|16K|32K|64K) of the partition

- vhd-attach - attach a VHD to system
/File:{path}

- vhd-detach - detach a VHD from system
/File:{path}

examples:

- Install Windows7 Ultimate (usually Wimindex 5) to drive C:, using unattend.xml file and define driver to integrate.
Use 😄 as driveletter for the new Win installation, run set_7_usb_boot.cmd before rebooting


WinNTSetup_x86.exe NT6 -source:G:\sources\install.wim -WimIndex:5 -syspart:C: -tempdrive:C: -unattend:"unattend\Win7x86_Ultimate_en.xml"-ForceUnsigned -drivers:"D:\driver_Win7x86" -Sysletter:C -RunAfter:"set_7_usb_boot.cmd C:\windows" -setup -reboot
- Install Windows XP to drive D:, where boot drive is C:, using unattend file [app dir]\unattend\winnt.sif,
integrate drivers [app dir]\XP_drivers, finsih install and reboot. But does not change MBR and BPR


WinNTSetup_x86.exe NT5 -source:E:\XPCD -syspart:C: -tempdrive:D: -unattend:"unattend\winnt.sif" -drivers:"XP_drivers" -setup -reboot -nobootsect
- creating a 25GB fixed VHD file


WinNTSetup_x86.exe vhd-create -File:"C:\my.vhd" -Size:25GB -Type:fixed
-attach vdisk "C:\my.vhd"


WinNTSetup_x86.exe vhd-attach-File:"C:\my.vhd"
-detach vdisk "C:\my.vhd"


WinNTSetup_x86.exe VHD-detach -File:"C:\my.vhd"

 

To install Windows in a VHD file:

- requires Windows 7 as OS and Windows 7 Ultimate, Enterprise or Server 2008 R2 as Source
- create a partitioned VHD and assign a drive letter (push Ctrl + Shift + V to use build in diskpart wrapper for this)
- select the VHD drive as installation drive (make sure you boot drive ist a active primary partition on a physical disk)

If you get an Antiv

 

Link to comment
Share on other sites

6 hours ago, SteveSi said:

Ctrl+Shift+D feature not mentioned ?

Not yet, will be added as "Ctrl+Shift+D - select diskpart script to be used to format the disk"

as long you don't have any better wording.

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Version 4.1 is ready now!

- improved Dark Theme (less flickering)
- F1 Help text does support URL's,  now have fixed TAB width
- minor bug fixes
 

  • Like 2
Link to comment
Share on other sites

  • JFX changed the title to WinNTSetup v4.6.5 / v5.0 Beta 3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Recently Browsing   0 members

    No registered users viewing this page.


×
×
  • Create New...