MSFN is made available via donations, subscriptions and advertising revenue. The use of ad-blocking software hurts the site. Please disable ad-blocking software or set an exception for MSFN. Alternatively, register and become a site sponsor/subscriber and ads will be disabled automatically.
Search the Community
Showing results for tags 'Hardware'.
Found 5 results
Introduction: Here, you will find a list of AMD/Intel CPUs/chipsets and Intel/NVIDIA/AMD GPUs which support Microsoft® Windows Vista™. If you have any additions that aren't currently listed, feel free to reply with them and they will be added as soon as possible. Supported CPUs: Intel (Desktop/Server): Note: Windows Vista has been known to work with Pentium III and even some Pentium II processors, however this configuration is extremely suboptimal and the OS is practically unusable on these processors, so using at least a Pentium 4 (Prescott), plus installing Windows Vista Service Pack 2 is recommended for acceptable performance. Intel Pentium 4 (Prescott, 2004-2005) *x64 is only supported from the Pentium 4 505 Processor and newer Intel Pentium 4 Extreme Edition (Prescott, 2005) *Supports both x86 and x64 Intel Pentium 4 HT (Northwood, 2003-2004) *x86 only Intel Pentium 4 HT (Prescott, 2004-2005) *x64 is only supported by F-series, 5x1, 517, 524 and few OEM models in E-series (SL7QB, SL7Q8) Intel Pentium 4 HT (Prescott 2M, 2005) *Supports both x86 and x64 Intel Pentium 4 HT (Cedar Mill, 2006) *Supports both x86 and x64 Intel Pentium D & Pentium Extreme Edition, all models Intel Celeron, all Netburst-based models (Williamette & Northwood-128, 2002-2003) *x86 only Intel Celeron D (Prescott, 2004-2005) *x64 only supported by 3x1, 3x6, 355 models Intel Celeron D (Cedar Mill, 2006-2007) *Supports both x86 and x64 Intel Celeron *all Core-based and newer models up to Ivy Bridge based Celerons; Braswell/Haswell and later do not properly work with Vista. Intel Core 2 Duo, all models Intel Core 2 Extreme, all models Intel Core 2 Quad, all models Intel Pentium up to Sandy/Ivy Bridge G series processors; Haswell and later do not properly work with Vista. Intel Core i3 *all models up to 3rd generation Ivy Bridge processors; Haswell and later do not properly work with Vista. Intel Core i5 *all models up to 3rd generation Ivy Bridge processors; Haswell and later do not properly work with Vista. Intel Core i7 *all models up to 3rd generation Ivy Bridge processors; Haswell and later do not properly work with Vista. Intel Xeon 1.4 "Foster" - Intel Xeon 3.2 "Gallatin" *x86 only Intel Xeon, all models from 2.8 "Nocona" to 3rd generation Ivy Bridge Xeon processors; Haswell and later do not properly work with Vista. Intel (Mobile): Intel Pentium M, all models *86 only Intel Pentium 4-M, all models *x86 only Mobile Pentium 4, all models *x86 only Mobile Pentium 4 HT, all models *x86 only Intel Atom *all models up to Bonnell microarchitecture (2012); Silvermont (2014) and later do not properly work with Vista. Intel Core Solo, all models Intel Core Duo, all models Intel Core 2 Solo, all models Intel Core 2 Duo, all models Intel Core 2 Quad, all models Intel Core 2 Extreme, all models Intel Pentium up to Sandy/Ivy Bridge mobile processors, Haswell and later do not properly work with Vista. Intel Core i3 *all models up to 3rd generation Ivy Bridge processors; Haswell and later do not properly work with Vista. Intel Core i5 *all models up to 3rd generation Ivy Bridge processors; Haswell and later do not properly work with Vista. Intel Core i7 *all models up to 3rd generation Ivy Bridge processors; Haswell and later do not properly work with Vista. AMD (Desktop/Server): AMD Athlon 800 - Athlon 1000 (Pluto/Orion, 2000) *x86 only AMD Athlon 800 - Athlon 1400C (Thunderbird, 2000-2001) *x86 only AMD Duron 800 or later (2000-2003) *x86 only AMD Athlon XP, all models (2001-2003) *x86 only AMD Athlon 64, all models AMD Athlon 64 X2, all models (X2 & K10) AMD Phenom, all models AMD Opteron, all models AMD Sempron (Palermo, Socket 754; July/August 2005) *x64 only supported by all models with an OPN ending in BX and CV) AMD Sempron (Palermo, Socket 939; October 2005) *x64 only supported by all models with an OPN ending in BW AMD Sempron "Manilla" or later, all models AMD FX (Bulldozer Family), all models AMD Ryzen (all Summit Ridge models; Raven Ridge has yet to be tested) AMD (Mobile): AMD Mobile Sempron, all models (2003-2006) *x86 only AMD Mobile Athlon 64, all models (2004-2005) AMD Turion 64, all models (2005) AMD Kite Platform - AMD Carrizo Platform, all CPUs & APUs (2006-2015); Bristol Ridge (2016) may work but has yet to be tested. Supported GPUs: Intel GPUs: Intel 915GM/GMS will work with Windows Vista by using XP drivers, however Aero Glass isn't supported due to lack of WDDM drivers. Intel GMA 950 (Desktop: 945GC, 945GZ, 945G; Mobile: 945 Family) or newer, last Intel GPU to support Vista is Intel HD 4000 series (Ivy Bridge; Desktop and Mobile). Download Intel HD 4000 Graphics drivers for Vista here. ATI/AMD GPUs: ATI Radeon 9250 and all later GPUs released prior to the 9500 will work with Vista using XP drivers, however Aero Glass isn't supported due to lack of WDDM drivers. ATI Radeon 9500 or later; last AMD GPU to support Vista is AMD RX 300 series; drivers are coming soon. The first official version of ATI Catalyst to support Vista is version 7.1. The last official version of AMD Catalyst to support Vista is version 13.12 (Download: 32 bit 64 bit). However, newer versions up to 15.6 Beta for Windows 7 can be modified to work on Vista. View this thread for more details. NVIDIA GPUs: NVIDIA GeForce FX 5100 and later NVIDIA GeForce 8 series to GeForce 300 series; download recommended driver here: 32 bit 64 bit NVIDIA GeForce 400 series and later; last NVIDIA GPU to officially support Vista was the GTX 980 along with driver version 365.19. Download here: 32 bit 64 bit - Note: Vista 3D Vision support was dropped around version 310.00. The GTX 1060, 1070, and 1080 can also be made to work with Vista, as driver versions up to 372.70 work with Vista, albeit not officially supported by NVIDIA. Download here: 32 bit 64 bit - Note: DirectX applications aren't properly utilized by these drivers under Windows Vista, so this will cause a bottleneck in performance over using the GTX 980 or older, where the 365.19 drivers (more optimized for Vista as they're officially supported) can be used. Final Apple Mac Computers to support Vista via Boot Camp: iMac; all Late-2009 models Macbook Air; all Mid-2009 models (32-bit only) Macbook and Macbook Pro; all Mid-2010 models Mac Mini; Mid-2010 (This is the only Mac Mini to support Windows Vista 64-bit; earlier models are 32-bit only.) Mac Pro; Mid-2010 Miscellaneous Hardware: Looking for an Xbox One Controller driver for Windows Vista? View this thread for download + how to install (HUGE THANKS TO @GTAGAME for this.) Download Elgato HD 60 S Capture Card drivers here - to install, extract the exe with 7-ZIP and manually install the drivers in Device Manager (thanks again to GTAGAME for pointing this out).
It's good to find this site as I'm hoping solutions will be available. I have a XP desktop (SP3) and Firefox ESR 52.2.1 is presenting with connection errors to common sites such as Outlook.com/ LinkedIn/ Yahoo and others. Your site came up in a google search and after reading Monroe's thread titled 'Browsers Still Working with WinXP in 2017' it was clear I was not alone in this situation. I would upgrade to a new machine/software but that is not possible at this time if you get my meaning, so I'm trying to see what can be done to preserve internet access. I tried SWiron and Sea monkey but they would not install on my OS. I DL'd 98SE's archive of Opera in hopes it will install and run on my machine. If anyone reading this has some suggestions, I'm open. Thanks to the persons behind this site and I hope to hear from you.
I have a Dell Dimension E510 desktop from around 2006-ish. It has an Intel 945G chipset and a 82801 controller hub, a 2.6 GHz Pentium D processor, and 2 GB of RAM. I have compatible PCI cards for the graphics, sound, and network, and I can downgrade the RAM to 1 GB by removing one of the modules. I'm just wondering if there are Windows 98 drivers for the motherboard, and if anyone else has had luck with Windows 9x on 945G motherboards. I tried searching for the drivers on Intel's website, but I keep getting dead links.
I was wondering if it was at all possible to run windows 98 nativley on new hardware. The built would contain a Pentium G3258,8gb ram,40gb ide drive and ide cd-rom, and a pci graphics card. The pc would also boot linux which would be on a seperate sata harddrive with a sata dvd-rom and use a pci express graphics card. I know you can run 98 with that much ram(change a setting in a file(iv done it before) but am unsure about the processor speed and that its 64 bit. I am aware that Windows 98 will only see one core. I know I could just use virtulization(which I currently do on a difrrent pc) but that takes the fun away.
Hello everyone my name's Jason and I have a question. I currently own an old Pentium 4/HT based rig with the following setup: Specs- Current Case: Athenatech A4224BB http://www.newegg.com/Product/Product.aspx?Item=N82E16811190051 Psu: Antec 300w (Model: PP-303XP) http://www.antec.com/specs/p303xp_spe.html Mobo: ECS L4VXA2 (V1.0A? Not sure as there isn't any indication of revision A, B, or C labeled anywhere on the board; therefore I'll assume it's rev A.) with Socket 478. Bios rev. 1.1e http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?CategoryID=1&DetailID=44&DetailName=Feature&MenuID=24&LanID=0 Cpu: Celeron 2.4 ghz (North Wood, no HT, no OC) Gpu: Nvidia Geforce 2 MX/MX 400 with 32mb or on-board ram (I think it’s just the mx version, not sure though). Ram: 768mb = 3x256mb of DDR1 ram at 333mhz Drives- 1 Maxtor 80gb ide HDD, 1 Zip Disk 100 ide drive, 2 Floppy drives (3.5 inch/1.44mb), 1 CD-RW drive, and 1 DVD-RW drive. OS: Windows Millennium Edition Ver. 4.90.30000 I wish to upgrade this rig to the following: Specs- Potential Case: Same (if possible). Psu: Same (if possible). Mobo: Same. Cpu: Pentium 4 3.06ghz (HT disabled). Gpu: Ati Radeon 9800 Pro/AIW or Geforce 6800 GT or better if possible. Ram: 3gb = 3x1gb of DDR1 ram at 333 or 400mhz Drives: Same. OS: Same. Audio: SoundBlaster Live! Or better. Will this set up work and what will I need to do to modify WinME to work with it properly? A few points of concern on my part I hope you might know how to fix/suggest a better method: Hardware Issues- Current Psu seems to hate my Molex to floppy power adaptors and will not start at all unless I use the two original floppy power cables. This also means that most of my molex cables are really close to the drives and I can’t extend them further to reach a gpu if it needs a molex power plug. The case I have isn’t very accommodating to large gpu’s and my Geforce 2 MX already takes up most of the space between the hard drives and it’s AGPslot. ACPI is completely broken and I had to disable it on this board as it causes random shutdowns and Windows Me can’t shut down normally with it enabled or it hangs on a black screen with a blinking dos cursor. Software/OS issues: I don’t have any software/OS issues yet but I’ll post them here if any should arise. Thank you for your time in reading this and replying. P.S.: If I posted this to the wrong forum section, just feel free to tell me where it should be or move it there if possible.