All Activity

I need log from @tixemog149

Hmm, it seems that error with a met before: LIne 53 of the INF file is invalid + Inaccessible boot device 007: its something specific to Data Center (it make sense to use all cores for future migration) and nlite, or Data center itself, im not sure if problem was solved, install progressed fine with manually adding drivers - whatever it means and installed it on another machine. I checked *.inf files, im not sure which *.inf file is mean to be broken, because its the same fine with multiple drivers. Other error driver XX is corrupt regarding of Fernando: https://winraid.level1techs.com/t/problem-integration-of-ahci-drivers-in-windows-2000-failed/32970/10 Its because you are trying to install 64 bit driver instead 32 bit, but im quite sure also that driver which im using is 32bit, as other user. Maybe clue could be that every edition has their own Driver.cab, cab for Data Server is much smaller than others. So this thing is still a bit not fully discovered mumbo jumbo minefield.. I will continue with testing.. Did not yet tested NTsetup.. Another thread with same problem: Update: Finally some suckes with Advanced server iso, disk in AHCI mode is now found, when i press F7 - for no ACPI with the same BlackWingCat AHCI drivers (so driver are fine for Windows 2000 versions), with ACPI im stuck on setup loading, so problem is with ACPI. I wonder beside ACPI.SYS (for some reason in tutorial is step to make filename upppercase, i did not do that previous) there is wmacpi.sys loaded in working installation and there are hal with acpi in filename too, all of these could be maybe sort of the problem.

This is very interesting i have tried to boot from *.vhd from Grub 1/2 Grub4dos and always failed. I saw Firadisk used by some USB multiboot solution, once have different problem, it was embedded in installation cd and add problem to remove it from system and keep it bootable. Otherwise i did more experiments, i managed to fix problem where fix_hdc failed, with older Paragon 2011, it does not display Microsoft VHD loopback as critical as more modern version, its asking for Windows 2000 cd to load files from drivers.cab and i have used already updated iso with new acpi.sys and BlackWingcat ahci drivers, so i cant say if it worked because of older Paragon or update iso. But i quite sure that i did everything right with ISO AHCI and ACPI update, but it always ends up with bootscreen 007 error at the end Windows 2000 setup loading, older Paragon can specify, what exactly driver device from inf you use my device is : PCI\VEN_8086&DEV_1E02 i selected driver, but its still failing. PCI\VEN_8086&DEV_1e02.DeviceDesc="Intel Panther Point SATA2 controller (SCSI)" Also tried if acpi is working at least in ATA mode, but i get again loading Loading freeze, if not press F5/F7 and skip ACPI, but i can enable it later through machine type switch fine. So i would be fine, if would be able to install AHCI drivers after and boot in ATA mode and switch bios to AHCI boot.. i have tried to point system to AHCI driver and apply force it to apply on IDE controller, but it does not worked, im not sure i have to check if controller Hardware ID is the same as in case of ATA mode, with Blackwing cat AHCI drivers, but it not worked, so far. Virtualbox, yes i can switch it to AHCI mode and install it with ACPI, but after i would try to boot with different disk controller so i expect that it will fail, im not sure if can emulate some chipset, which would be same driver as real machine - after only disk controller Hardware ID would be different and maybe it will work.

Can anyone test / confirm last version of Combined Community Codec Pack that works on windows 95? according to the archive below, a late 2005 version ( 2005-11-07 ) mentions windows 95, however, i have not been able to find this anywhere on the internet, so i was hoping maybe someone can upload that if possible. I was going to use this alongside wmp 7.0 or 7.1 ( unofficially ) + L3C.exe ( mp3 plug in for wmp ), all of which have been untested so far. version 2006-07-28 mentions the pack will only install if directx 9.0 or later is present on the system, but still mentions windows 95 lower in the page: https://web.archive.org/web/20061013144045/http://www.cccp-project.net/wiki/index.php?title=Main_Page windows 95 mentioned for version 2005-11-07: https://web.archive.org/web/20060523013259/http://www.cccp-project.net/wiki/index.php?title=Main_Page

With the test version above, all the icons for my Microsoft Terminal Jump List are now rendering correctly! DbgView output: [15316] Dark Magic C:\Windows\Explorer.EXE [15316] SIB ShellRegisterHotKey 1 8 0 0000000000000000 [15316] no [15316] SIB ShellRegisterHotKey 2 2 1b 0000000000000000 [15316] no [15316] SIB ShellRegisterHotKey 3 4008 43 0000000000000000 [15316] ye [15316] SIB ShellRegisterHotKey 4 400c 86 0000000000000000 [15316] ye [15316] StartIsBack: forbiding XAML launcher to start [13420] [22:06:46.3294248] [Info] TrayHelper.cs::WndProc::338 [13420] [13420] Taskbar re-created [15316] Jumplist populated in 14 ms (system pane items 14 init 2 ms) total 30 ms

@Dietmar Please extract bios from this: https://dl.dell.com/FOLDER13218127M/1/Wyse_5070_1.37.0.exe

Please download test version, run DebugView https://startisback.com/StartAllBack_setup.exe and attach debug log created during install / explorer restart here please

It does not.

Hi, please could someone help with proper configuration of $VBT of CherryView VBIOS for built in LCD? My problem is that I have some old netbook TrekStor SurfTab twin 11.6 with Intel Atom x5-Z8350 CPU @ 1.44GHz. It has AMI Aptio UEFI 32-bit without CSM and without legacy VBIOS at all. Recently I got know about CSMWrap project and tried it on this machine hoping I could run at least DOS and some DOS apps/games. But there's a catch that if no VBIOS present CSMWrap use fallback SeaBIOS VBE that is very limited and cannot draw properly even most of DOS TUI programs like EDIT or file managers... CSMWrap was now extended to allow to load VBIOS images. So I downloaded the package from winraid thread [ http://winraid.level1techs.com/t/guide-transfer-of-specific-intel-orom-vbios-and-gop-vbt-settings-by-using-intel-bmp-tool/30930/288 ] and used the latest Cherry View VBIOS chv_1014.dat but it works only with attached ext. LCD via microHDMI - I got black screen on build in LCD. So I decided I need to update $VBT structure according to one that is present in UEFI GOP (I currently have dump of SurfTab UEFI image from flashROM via AMI tool). I extracted it easily but there are multiple $VBT instances under various GUIDs and I don’t know which one is really used. Next problem is that GOP’s $VBT is version 195 while all chv_101x.dat VBIOSes I found use older $VBT version 190 so I cannot easily transfer the settings from newer to older. I tried it manually with opened 2 windows of intel BMP tool and I tried to match the settings close as possible. I got partial success with modified VBIOS (manually updated $VBT 190) but still several problems: 1) I have to ext.LCD connected via microHDMI to boot on it and then when VBIOS initialize it swaps screen to built in LCD and I can disconnect the ext LCD on microHDMI until reboot. But if I boot without ext. LCD I still got black screen on built in LCD after VBIOS init so it’s not much practical. 2) The image on built in LCD after VBIOS init is rotated 180 deg upside down and I cannot see any option in intel BMP to rotate it back - any idea? 3) Tere are other issues of rendering text mode both on ext. and built in LCD that makes real usability quite low. e.g. when under DOS the text on screen reaches the bottom line, instead of scrolling up the sceen becomes entire light gray and all further text is displayed only at single bottom line - unreadable output if more lines printed. Also any program that use VESA graphics cause hang. VGA programs like Doom can run with some visual artifacts (e.g. translucent demons are white http://rayer.g6.cz/1tmp/csmwdoom.jpg ) and keyboard is not responding during the game (become responsive after Doom quits if I run it with -timedemo demo1). So I’d like to know if there’s a chance to get some newer VBIOS or configure it properly to get usable DOS machine working with built in LCD without need to connect ext. LCD…

It helped, thank you, before that i was on version 3.9.12

Is it a degradation? Try 3.9.11 https://startisback.sfo3.cdn.digitaloceanspaces.com/StartAllBack_3.9.11_setup.exe

Clear data on exit. The flag doesn't work, cookies are still being left, just discovered. UPD. Never mind, started working after several re-launches.

@ED_Sln, in 137 Hints are still there. Look. The flag doesn't work, again. Did it, ever?

Guys, girls thanks all, I'll try to switch off the extensions one by one, cloudflare may not like them.

Could you help me to run CatsXP, maybe? I could only get up to the 125th version of it.

That I can't do, I need to maintain the gaming performance. BTW, I had managed to start 137. But not 140. And with the old redirection method, WITHOUT SM files at all. I don't have any EX kernels extensions installed.

I see that there is a need for a more detailed explanation. You need: Vista SP2 x64 (you may need to upgrade it to 2017 EOL) kernel33.dll from Vista extended kernel v2023-03-09. p_advp32, p_ole, pwp_shl, p_user from Supermium 132 R4. (for convenience you can name them advapi33, ole33, shell33, user33 etc) In the chrome.exe file, change kernel32.dll to kernel33.dll in the import table using CFF Explorer In the chrome.dll file, change the same import. Then open this file in HxD and search for advapi32, ole32, shell32, user32 - they may be in several places, change the ones that are full import table looking like below: In the chrome_elf.dll file, as you rightly pointed out, change NtOpenKeyEx to the NtOpenKey version.

I have enabled enhanced classic start menu enabled, and it works when i click on start orb, but when I press start button on keyboard it opens default win11 start menu. How can I fix it ?

It seems that Daum Potplayer for Windows Vista is out of date. The last version I could install was 1.7.22508 released in March 2025. Maybe for some people it is not the best player, but it was really good for me. Such a pity.

@Karla Sleutel Supermium 126.0.6478.254 64-bit, XP64-bit - works in PL

Sotwe.com is working fine here in the UK on Supermium 132.0.6834.224 on XP.

Hello! Firstly, thanks for this awesome software! I am seeing a niggling issue with the display of jump list icons for Microsoft Terminal when SAB Enhanced Classic Taskbar is enabled. Comparison between with and without SAB Enhanced Classic Taskbar enabled respectively: The "Windows PowerShell", "PowerShell" and "PowerShell (Admin)" profiles are using icons from the Terminal app's manifest (specified using ms-appx:// protocol path) - all the rest are using simple file system links to .ico or .png files - it seems to be these that are problematic and only the app's default icon is displayed rather than the custom icon specified in the profile. Here are two of the profile configurations showing the difference in the icon configurations resulting in this behaviour: { "commandline": "%SystemRoot%\\System32\\cmd.exe /f:off /k c:\\cmdtools\\cmdprompt.cmd", "guid": "{0caa0dad-35be-5f56-a8ff-afceeeaa6101}", "hidden": false, "icon": "C:\\CmdTools\\clink\\clink_purple.ico", "name": "Shell" }, { "colorScheme": "Campbell Admin", "commandline": "\"C:\\Program Files\\PowerShell\\7\\pwsh.exe\" -NoLogo -NoExit -f c:\\cmdtools\\pwsh_prompt.ps1", "elevate": true, "guid": "{1b06313f-f69d-4627-9e4c-5cf543917c87}", "hidden": false, "icon": "ms-appx:///ProfileIcons/pwsh.png", "name": "PowerShell (Admin)", "startingDirectory": "%USERPROFILE%" } Seeing this across multiple PCs. Just in case, I did try deleting SAB's cache as well as the recents custom destinations db/cache (%AppData%\Microsoft\Windows\Recent\CustomDestinations) but the issue persists when the caches are recreated. Let me know if you need any more information. Thanks!

The site is still blocked on the DNS level in some countries like Canada. Obtained the latest 132 copy from Github. Now I get this.

Supermium's advapi misses this api. How do you run it, then?

is someone making that test spoken of ? like j7n did with server 2003 x32 bit´s (its a XP based OS) someone has to disable the pagefile (because theoretical windows can also pass the 4 GB using a pagefile, a pagefile is just data on a harddrive/HDD/SSD) then someone has to use up more then 4 GB of ram, it would be a good indicator, but perfect would be to look of the pages are really in the upper 4 GB ram i meant to turn off the pagefile quite often - but then it didnt do that anyways the pagefile was still not offline maybe daniel k. should say something about this he wrote in a other post that in his opinion both ntoskrnl and hal has to be changed to make xp able to do the 64 GB (dibya said the oposite for example) - who knows who is right daniel k.writes that he modified hal and ntoskrnl (that suggest that that ntoskrnl´s and hal.dll are patched) also he mention symbol files - that also suggest that a ntoskrnl version and a hal version was used to do so you cant just select the patched ntoskrnl.exe and hal.dll by a symbol file searcher you have to figure out what version that ntoskrnl and hal are... then you have to force the disassembler to use the file from the non patched version the filecompare tool will find the changes if you have the right ntoskrnl and hal therefore also daniel k. wrote that he used the free space method for doing the patch this can be risky because some codes only access some free space sometimes, or on certain conditions (this often makes random crashes) a better solution is to add a section or increase a section - you have to know what you do here but - you quickly can kill the files like that if you dont know what you are doing are there more then 3 versions to do so ? its gambling around like "dibya´s" "the russian one" and the "daniel k. one"