All Activity

Sorry if this is necropost but... https://drive.google.com/file/d/174IHPJVd2AshHT0atFRC7e1mIfT3lqxz/view?usp=drive_link I've taken the last 98/ME version of 9.0.289.0 and patched out the MonitorFromWindow... Here's the zip above this. Make sure you copy to the folder where it installed to...

some old versions of nitroPDF work correctly on XP.

It has always been so. This problem is exactly the same age as the Extended Kernel for Vista has existed. No one knows where this came from or what the reason is, including the young creator of the Extended Kernel himself, because this development was abandoned by him a long time ago. Back in the days when I was still trying to use the Extended Kernel for Vista, I found the only solution - to use a third-party application to switch the language. So, since I am a cosmopolitan, I have no political prejudices, and I am not burdened with a complex of historical inferiority, I eventually came to the conclusion that the Punto Switcher would be the best choice. It is multilingual, has a hotkeys and a bunch of other settings, and is displayed in the taskbar in both alphabetic characters and more pleasing-to-the-eye flags. Just try this, and you'll forever forget that Windows ever had a language bar. However, you can also try something else. Good luck ;)

After installing KB5071546, StartIsBack causes Explorer to crash. Uninstalling StartIsBack fixes the problem.

https://w7revived.chefkiss.dev/steam/SteamDec42025Win8.7z Steam December 4 Build Windows 8/8.1

well then just move enough files on that harddrive until it extends the 2 TB limit, better would be to use the entire disc if the files are then corrupted or the checksum test has different value´s it dont work

Yes, there are no more working license keys for My ancient version of Kaspersky. My last license key for My ancient version of Kasperky expired 10 years ago. When I then contacted Kaspersky in the US they informed me that they had no more license keys for My ancient version of Kaspersky for sale, and that I should contact their head office in Moscow, maybe they could sell me one. But that looked a little complicated to me, and I don't need daily updates. My ancient version of Kaspersky is definitely not eliminated. It is a trial version which has NO EXPIRATION DATE, in contrast to subsequent trial versions by Kaspersky, and runs indefinitely without a license key. It has been used nearly daily over the past 10 years, with near-current signatures, without requiring a license key. The limitation of this trial version is that it can be updated ONE time after installation. After the first successful signature update, the update button is greyed-out and doesn't work anymore. Here is the explanation of why My ancient version of Kaspersky is still updateable: I have been making progressive clean opsys/partition backups, since the initial installation of WinXP: step 1) created a clean opsys/partition backup step 2) test-installed e.g. 5 new programs, and e.g. 4 of them were rejected and 1 should be kept step 3) restored the preceding clean opsys/partition backup step 4) made a clean re-install of the program(s) I wanted to keep step 5) created the next clean opsys/partition backup with the new program(s) I wanted to keep etc The benefit of such progressive, clean opsys backups is that the computer stays clean and free of junk. When I made the clean install of My ancient version of Kasperky (step 4), - I installed the program - made all the desired customization settings - created a new progressive, clean opsys/partition backup (step 5), WITHOUT having updated Kaspersky The benefit of creating a progressive, clean opsys/partition backup of Kaspersky, WITHOUT having run the 1st signature update, is that the opsys backup file and all subsequent progressive backups do not get bloated with 700+ MB of signatures. A side benefit of creating a clean opsys backup of My ancient version of Kaspersky, WITHOUT having run the 1st signature update, was that whenever a subsequent progressive opsys/partition backup was restored (step 3), e.g. when making a new progressive opsys backup, a virgin version of Kaspersky was back again, permitting an update with the current signature.. I make progressive, clean opsys/partition backups about every 2-3 months, with new good stuff added progressively. My ancient version of Kaspersky has worked fine for me, even with signatures up to 3 months old. Below are two screenshots of My ancient version of Kaspersky under WinXP SP3, updated last week to the signature of 3Dec2025. The Server edition of My ancient version of Kaspersky also installs, runs and updates fine under Windows Server 2003 on my Inspiron 7500 laptop (Pentium III of the year 2001, 700MHz). Below are three screenshots under Windows Server 2003 of 20Nov2025. I had installed Win2003 on my Inspiron 7500 because WinXP cannot be made to work with GPT HDDs >2TB on a Pentium III laptop. My ancient version of Kaspersky can virus-check OK stuff on a 4TB HDD, under Win2003 on a 24-year-old Pentium III laptop, although it is extremely slow.

For XP and Vista, you will also very likely need "VMware Tools 10.0.12". They can be found at the Internet Archive - BUT since they seem to also contain items in violation of MSFN forum rules, I feel it best to not "link" them here. Google/Bing/DuckDuckGo for "archive.org vmware player 12.5.9" then do "parent directory" browsing until you stumble upon "VMware Tools 10.0.12". Some people label them as "legacy" or "preVista". edit: have not used, I tend to stick with VirtualBox versions 5.1.22 and 7.0.26 as I have my system configured to use BOTH OF THEM at the same time. I use 5.x for everything except Win11 testing, which needs 7.x (maybe 6.x, don't recall) or higher. and on second thought, the archive.org links "should" be safe to post here at MSFN. according to Wikipedia, VMware has been *FREE* since mid-2024 (news to me, free is why I've always used VirtualBox instead).

Navigating from the link in post #1, FileHippo has versions 15, 12, 6 and many others.

Version 19 no longer installs correctly on a 26100.1 system. The taskbar is hung and keeps looping on a msg to hold down ESC to keep it from loading, but that doesn't stop the hang. Killed explorer and ran the v16 install and taskbar is back to normal. It seems v19 is not downward compatible anymore.

I really think it is time for you to stop festering roytam over your YouTube playback issues. Roytam has replied and you keep festering, festering, festering. @Dave-H - can you please add this to your "watch list"?

Maybe the problem is in the splitter. You have updated ffmpeg 3.4.14, the new version of ffmpeg will not necessarily work better than the old one. You might want to try older versions of ffmpeg from 2009. They may work even faster. Because the new ffmpeg is very much oriented to 64 bit and windows 10. The ffmpeg developers are sponsored by donations from google and microsoft related entities. Also, if possible, I recommend you look up the answer in Centaury's code https://github.com/Feodor2/Centaury/releases

Where can I find VMWare Player for Windows XP and Vista? I am alone having issue finding VMWare Player 15 for Windows 7 (have a copy archived though).

It is possible that the SP3 you used for comparison was somehow corrupted. On my hardware, SP3 was indeed "faster" than SP2. I am not a "gut feeling" type of guy. I took quantifiable and repeatable measurements that led me to using SP3 over SP2. Hard facts that were repeatable. No "gut feeling", no "placebo effect". That's not to say that you are "full of it", lol, it is POSSIBLE that SP2 is "faster" on your hardware. Just saying that was not the case back in the day when I compared the two. One POSSIBLE factor is that I *never* install a Service Pack 'on top of' an existing installation - I SLIPSTREAM IT INTO MY INSTALLATION DISK. Then FORMAT and INSTALL brand new.

A license key and the corresponding, customized download link of DRevitalize can still be bought from the author if you contact him at his email address.

No. h2testw of 11Feb2008 is mainly for SDHC cards or USB sticks and doesNOT work with HDDs >2TB: A 3.09TB partition on an OK 4TB HDD, connected via eSATA to my old Inspiron 7500 (Pentium III, 700Mhz), gets incorrectly displayed under Windows 2003 (32bit, SP2, Enterprise, 18Feb2007) as "879249 MByte". Updated on 9Dec2025: The "879249 MByte" incorrectly displayed by h2testw as partition size are the "858GB" Free Space of the 3.09TB partition, as displayed OK by My Computer under Win2003. This incorrectly displayed capacity by h2testw is a typical characteristic of programs NOT compatible with HDDs >2TB. Using h2testw on HDDs > 2TB will most likely corrupt the HDD. As a minor linguistic note: the English-language interface window of h2testw (German software) displays "879249 MByte", instead of the correct plural "MBytes"; in German the singular and plural forms of "MByte" seem to be the same.

SP3 on my old 2006 laptop feels a bit bloated and slower, SP2 feels cleaner and faster, so that's why I use SP2. Thanks, I appreciate it.

Yes, it will only install 1.67, need to have browser version 128 or newer

My version is: 10.0.10586.15 by Microsoft. And I have Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219 installed: https://download.microsoft.com/download/1/6/5/165255E7-1014-4D0A-B094-B6A430A6BFFC/vcredist_x86.exe

Jeez, it turns out that now, for version <yt-dlp_x86_winXP_2025.12.06> to work, you need this “junk” — <Microsoft Visual C++ 2019>, which has to be placed in the same folder! Since I have no intention of polluting my system with that crap, I just copied all the missing files directly into the folder with <yt-dlp_x86_winXP.exe> But here’s another question: why did version <yt-dlp_x86_winXP_2025.11.25> work perfectly fine without those extra DLLs? After all, those files are already embedded inside <yt-dlp_x86_winXP.exe>, and when unpacked, everything gets extracted into the TEMP folder anyway! So what’s the point of this “duplication” now?

I've uploaded v3.6.0 (for which my AMD Ryzen AI MAX 385 for the first time did all the hard, and particularly quick, work). Please confirm it works on WinXP.

hmm i do not know the details but these are 2 different error messages: "api-ms-win-crt-convert-l1-1-0.dll was not found" -> this means that dll/file was not found "ucrtbase.mbstowcs could not be found in the dynamic library api-ms-win-crt-convert-l1-1-0.dll" -> this means that the dll/file was found but not the function "ucrtbase.mbstowcs" in that dll ucrtbase refer to the c-runtime (ucrt - Universal C Runtime Library) so you might can give it a try by installing the vc-runtime https://learn.microsoft.com/en-us/cpp/windows/latest-supported-vc-redist?view=msvc-170 but i do not know if that one needs sp3 - its worth a try but there might also be a different version or modded version of that api-ms-win-crt-convert-l1-1-0.dll - what can give you function maybe if you have one (these files had different compiles for different os´s of windows) (what could explain why that error message says it found the file but not its function) if the c-runtime works - a good method to avoid this problem is to ship the vc-runtime with the executable (in this case ytdl)

I'll try these.

I didn't realise there were so many still using SP2 (why?). I will consider building the next version with PyInstaller 5.13.2 again. But do note, that in the future that may not be possible any more, due to the changes they make. Consider upgrading to SP3. In the meantime, here is a build that should work on SP2. @davidz, Do you really mean you're on SP3? Because in my SP3 machine (VM), 2025.12.06.064237 works fine: [debug] Command-line config: ['-v'] [debug] User config "C:\Documents and Settings\Nico\Application Data\yt-dlp\config.txt": ['--rm-cache-dir', '--console-title', '--add-metadata', '--embed-thumbnail', '--convert-thumbnails', 'jpg', '--js-runtimes', 'quickjs', '--ppa', 'ffmpeg:-metadata synopsis=""', '-o', '~/Bureaublad/%(title)s.%(ext)s', '-S', 'res:1080,vcodec:avc,acodec:m4a', '--sponsorblock-remove', 'all', '-N', '6'] [debug] Encodings: locale cp1252, fs utf-8, pref cp1252, out cp1252 (No VT), error cp1252 (No VT), screen cp1252 (No VT) [debug] yt-dlp version nicolaasjan/yt-dlp@2025.12.06.064237 (winXP_x86_exe*) [debug] Python 3.11.4 (CPython x86 32bit) - Windows-XP-5.1.2600-SP3 (OpenSSL 3.5.2 5 Aug 2025) [debug] exe versions: ffmpeg N-121824-g775b102182-WINXP (fdk,setts), ffprobe N-121824-g775b102182-WINXP, phantomjs 1.9.8 [debug] Optional libraries: Cryptodome-3.23.0, brotli-1.2.0, certifi-2025.11.12, mutagen-1.47.0, requests-2.32.5, sqlite3-3.50.4, urllib3-2.6.0, websockets-15.0.1, yt_dlp_ejs-0.3.1 [debug] JS runtimes: quickjs-2025-09-13 [debug] Proxy map: {} [debug] Request Handlers: urllib, requests, websockets [debug] Plugin directories: none [debug] Loaded 1853 extractors Removing cache dir C:\Documents and Settings\Nico/.cache\yt-dlp ..

Thank you. Sadly, I think the blue is uglier than the green, but .... it is what it is.