Dibya Posted July 13, 2016 Share Posted July 13, 2016 This month i received all the update Also update for office 2007 & 2010. Link to comment Share on other sites More sharing options...
Dave-H Posted July 13, 2016 Share Posted July 13, 2016 All installed fine here. Amazed to suddenly see so many .NET 2.0 updates, and one rather large .NET 3.0 update after all this time. I had assumed that at least 2.0 was actually no longer supported! How many of those nine (!) .NET updates actually replace updates that some of us have offline installation files saved for? Link to comment Share on other sites More sharing options...
bluebolt Posted July 13, 2016 Share Posted July 13, 2016 This month’s .net framework updates have, once again, produced a reboot loop here. Specifically, the five 2.0 updates are installing (along with the others) fine, then the yellow shield reappears, I reinstall the updates, the shield reappears, ad nauseam. KB3123055 KB3127223 KB3135986 KB3142027 KB3163248 This happened in April, but only affected, as I recall, two of ten machines. So far, one of three machines affected by these July updates. Link to comment Share on other sites More sharing options...
heinoganda Posted July 13, 2016 Share Posted July 13, 2016 (edited) @Dave-H The following .NET Framework updates are no longer needed: For NDP20SP2-KB3135986-x86.exe NDP20SP2-KB2863239-x86.exe 10/04/2013 + NDP20SP2-KB3035488-x86.exe 05/11/2015 For NDP20SP2-KB3142027-x86.exe NDP20SP2-KB2972105-x86.exe 10/14/2014 My .NET Framework lists are be updated soon! Edited July 13, 2016 by heinoganda 1 Link to comment Share on other sites More sharing options...
Dave-H Posted July 13, 2016 Share Posted July 13, 2016 4 hours ago, bluebolt said: This month’s .net framework updates have, once again, produced a reboot loop here. Specifically, the five 2.0 updates are installing (along with the others) fine, then the yellow shield reappears, I reinstall the updates, the shield reappears, ad nauseam. KB3123055 KB3127223 KB3135986 KB3142027 KB3163248 This happened in April, but only affected, as I recall, two of ten machines. So far, one of three machines affected by these July updates. How are you installing the updates, by clicking on the yellow shield or by going to the update site using Internet Explorer? I've often found that if I do it from IE, the yellow shield still reappears and prompts me to install updates that are already installed, which I check by scanning again on the website. Eventually the shield goes away, but it can take some time! Occasionally it goes away as soon as another scan is done on the website. Link to comment Share on other sites More sharing options...
Dave-H Posted July 13, 2016 Share Posted July 13, 2016 3 hours ago, heinoganda said: @Dave-H The following .NET Framework updates are no longer needed: For NDP20SP2-KB3135986-x86.exe NDP20SP2-KB2863239-x86.exe 10/04/2013 + NDP20SP2-KB3035488-x86.exe 05/11/2015 For NDP20SP2-KB3142027-x86.exe NDP20SP2-KB2972105-x86.exe 10/14/2014 My .NET Framework lists are be updated soon! Thanks, I have deleted my archived copies of the installation files for KB3035488 and KB2972105. All the others I have still seem to be relevant. I didn't have a file for KB2863239. Link to comment Share on other sites More sharing options...
bluebolt Posted July 13, 2016 Share Posted July 13, 2016 10 minutes ago, Dave-H said: How are you installing the updates, by clicking on the yellow shield or by going to the update site using Internet Explorer? I've often found that if I do it from IE, the yellow shield still reappears and prompts me to install updates that are already installed, which I check by scanning again on the website. Eventually the shield goes away, but it can take some time! Occasionally it goes away as soon as another scan is done on the website. I’m using the yellow shield method, though I’ve tried it with the browser as well (no difference). Last time it happened, I also tried downloading the updates and running them manually. Over the years I’ve often experienced the yellow shield reappearance after running all updates on a machine, but in those instances the yellow shield will subsequently show up only once again in the tray, and when I click it to install it vanishes, never to be seen again. Link to comment Share on other sites More sharing options...
kikuk Posted July 13, 2016 Share Posted July 13, 2016 got the same as @bluebolt all 5 Netframe 2.0 updates looks like correct installed onto my updates/software list; but explorer update want to install again & again....sure the yellow shield as well..... Link to comment Share on other sites More sharing options...
Dave-H Posted July 13, 2016 Share Posted July 13, 2016 So if the yellow shield is still telling you that updates that you've already apparently successfully installed are still needing to be installed, what happens if you do a "custom" scan on the website? Does that tell you they still need to be installed too, even though they are in the installed updates list as already being successfully installed? Link to comment Share on other sites More sharing options...
kikuk Posted July 13, 2016 Share Posted July 13, 2016 sure the "custom" scan on the website says once more they are needed. the installed update list says everything is istalled...as you saw above. the event-viewer says for excample: german: Updatename: KB3135986. Erfolg- bzw. Fehlerstatus der Installation: 0 english: Updatename: KB3135986. Success- or Mistakestatus of the Installation: 0 Link to comment Share on other sites More sharing options...
bluebolt Posted July 13, 2016 Share Posted July 13, 2016 Last time it happened I could uninstall .net 4, then reinstall it, then let Windows Update do its thing--problem solved. Unfortunately this time it’s .net framework 2.0, which I can’t uninstall. Link to comment Share on other sites More sharing options...
Dave-H Posted July 13, 2016 Share Posted July 13, 2016 That's not great, as IIRC Microsoft's answer for this sort of problem is to completely uninstall all .NET versions and reinstall them all from scratch, in order, which is a very lengthy undertaking! Why can't you uninstall .NET 2.0 as a matter of interest? There is certainly an uninstall option present in Add/Remove Programs on my system. Link to comment Share on other sites More sharing options...
bluebolt Posted July 13, 2016 Share Posted July 13, 2016 20 minutes ago, Dave-H said: That's not great, as IIRC Microsoft's answer for this sort of problem is to completely uninstall all .NET versions and reinstall them all from scratch, in order, which is a very lengthy undertaking! Why can't you uninstall .NET 2.0 as a matter of interest? There is certainly an uninstall option present in Add/Remove Programs on my system. While .NET Framework Service Pack 2.0 is listed in Add/Remove Programs, it is not available to uninstall. The manual method discussed here is only for XP SP2: https://support.microsoft.com/en-us/kb/908077 Link to comment Share on other sites More sharing options...
Dave-H Posted July 13, 2016 Share Posted July 13, 2016 Looking at that article, I can't see any reason why the same procedure wouldn't work on XP SP3. Link to comment Share on other sites More sharing options...
Dibya Posted July 14, 2016 Share Posted July 14, 2016 try force uninstall . iobit uninstaller is your good friend Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now