phaolo Posted July 28, 2013 Share Posted July 28, 2013 (edited) Hello, sorry for resurrecting an old thread, but I'm still stuck with WinXp and I'd like another confirmation before buying an external drive (when price will drop a bit): -does the WD My Book 4TB work for XP SP3 32bit at full capacity like the 3TB drive that you have tested? -is the hdisk going to be ready after plugged in, or will I need to install\use some driver\application? -I won't be able to format\defragment\manage the drive, right? What about using programs like syncbackup? -do 4Kb sectors have some catch, like bad performance or some incompatibility? -will I need to reformat the hdisk when I'll finally manage to upgrade to a shiny new 64 bit os? Thanks Umm..no replies at all? Please help! Edited July 28, 2013 by phaolo Link to comment Share on other sites More sharing options...
jaclaz Posted August 9, 2013 Share Posted August 9, 2013 Umm..no replies at all?Please help!Actually the replies are already in the posts and in the linked "original" thread and resources:http://www.msfn.org/board/topic/157117-running-3tb-drive-on-xp-over-usb-issue/http://social.technet.microsoft.com/Forums/windows/en-US/8fd33944-0202-4dff-a432-356e2b231f2e/windows-xp-hard-drive-size-limithttp://community.wd.com/t5/External-Drives-for-PC/Exceeding-2Tb-limit-questions/td-p/234694Basically there is a limit around 2 Tb in Windows XP, but the WD works around it doing a sort of "translation".As a matter of fact there is not a limit in "size", there is a limit in "number of sectors".http://blogs.technet.com/b/askcore/archive/2010/02/18/understanding-the-2-tb-limit-in-windows-storage.aspxA "normal" hard disk has 512 bytes sized sectors, those family of WD drives either have or fake to have 4,096(4 Kb) bytes sectors, consequently the limit is "shifted" towards 4,096/512=8*2=16 Tb.No, you shouldn't have problems of *any* kind with an XP 32 bit, no you don't need any special driver, and no you can re-partition/reformat/defrag the disk alright, of course you don't need to re-format if you switch to a 64 bit OS.The only possibles issues (but "general" i.e. not related to the HUGE size of the disk) could be with particular partitioning schemes/alignments, see:http://www.msfn.org/board/topic/154633-partition-boundary-alignment-in-4096-byte-physical-sector-drives/The utter foolishness of having a single (NTFS or any other filesystem) volume 4 Tb in size will not be particularly highlighted as I hold it to be a self-evident truth while that of having a single 4 Tb sized disk is more subtle, and while still self evident does need a few words of warning.Do you really think that *now* you *need* 4 Tb of storage?Or maybe what you actually need *now* is 1 or 2 Tb or less?How long does it take to produce 2 Tb along the *whatever* intended usage you plan?If anything more than a few weeks, buy a coupe smaller disk drive today, and buy another couple smaller ones when you will need them.Remember that the bigger a disk drive is, the more probable is that it is "new" (in the sense of largely UNtested) the more "compressed" (please read as written in tinier spaces) are the data on it, the more precise it's mechanical part needs to be, the more sophisticated it's ECC needs to be, it can fail and it will fail (sooner or later).At the very least, you should always buy storage disks in couples, a "main" one and a "backup" one.Disaster strikes rarely, but when it does the damage can be much bigger.And bigger is sometimes not "better".jaclaz Link to comment Share on other sites More sharing options...
phaolo Posted August 9, 2013 Share Posted August 9, 2013 Thank you for all the info jaclaz.Well, the long story is this:I read about WinXp 32bit limits about 1 year ago and I found a bunch of different uncertain opinions.For that reason, I opted for only a 2Tb WD drive for storage (the price was also quite good).Now it's 3/4 full and without a proper copy (scattered messy parts on old small drivers), so I'd really like to buy a single new one for backup+new space.I'm quite sure I won't get a new pc for the next 1 year, so I'm stuck with XP+external hdisks.. and I'm trying to avoid bad surprises.I'm happy about all the good news you confirmed.However, are you 100% sure that reformatting or defragmenting the >2Tb drive with Xp is safe?I obtained a lot of free space by doing it on the 2Tb drive, but I fear that Xp could screw up the WD trick on the big one. Link to comment Share on other sites More sharing options...
jaclaz Posted August 9, 2013 Share Posted August 9, 2013 Well, in theory there are none, but of course with *any* windows and *any* hard disk everything (and the contrary of it) is possible in practice.It ( everything or the contrary of it) may be more probable, less probable or improbable, but still possible. I would rate the possibility that re-formatting or defragmenting it under WIndows XP would cause issue highly improbable, though - as said - I use the same kind of sticks I use for Vista :http://www.msfn.org/board/topic/125258-nlite-and-microxp/#entry807225to NOT touch any hard disk bigger than 500 Gb, so I may be not the best person to ask for advice, my personal advice is to use smaller disks (though for a number of other reasons).jaclaz Link to comment Share on other sites More sharing options...
phaolo Posted August 23, 2013 Share Posted August 23, 2013 (edited) everything (and the contrary of it) is possible in practice [...] re-formatting or defragmenting it under WIndows XP would cause issue highly improbableBad luck apart, I read (again) that there could be problems with "misaligned partitions" created by an old OS like Xp.The explanations, however, weren't clear or complete.. to NOT touch any hard disk bigger than 500 GbWhy, are all the new >500 Gb drives made with Advanced Format?I've searched some spec about my old 2Tb WD, but I couldn't find if it's a 512e or a normal 512.If it's already an AF, then I didn't have any problem messing with it on Xp.Another question:could the 512e emulation be disabled in the future, in order to directly access the 4k drive from a compatible OS (example: Windows 8+) and so avoid all the fuss? Edited August 23, 2013 by phaolo Link to comment Share on other sites More sharing options...
jaclaz Posted August 23, 2013 Share Posted August 23, 2013 The issue is not common.The "standard" that MS itself established until XP/2003 was that a partition had to respect given boundaries, namely Cylinder and Heads, to comply with the oldish CHS method.Considering how the CHS limit was around 8 Gb, you can well understand how the issue was already common in NT 4.0 times.Notwithstanding this, 2000 and later systems (up - as said - to XP/2003) default to use this approach when creating partitions, whilst later SO, starting from Vista default to use a "round to 1 Mbyte" (usually) alignment.This should in theory be of NO relevance whatsoever, but the Disk Management in XP does a lot of things that shouldn't really do (more generally a lot of MS apps do a lot of things that they either shouldn't be done or that are done in a sort of "hidden" and often completely UNlike documented way). In order to make a partition (primary) active the ONLY thing needed is to write hex 80 in the appropriate field in the partition table and make sure that all other partitions have NOT that same field set to 80 (if it is, then it needs to be set to hex 00).It sounds simple enough, but unfortunately the Disk Management does a lot of (completely unneeded calculations) and when it finds on the disk Logical Volumes inside Extended partition NOT aligned to CH values (like the one that normally Vista amd any later OS would create) it "panics" and botches the partition tables in the EPBR's.Now, any normal program when it finds something "queer" or that cannot deal with correctly should throw an error or ask the user for confirmation, whilst Disk Management, when you try to change the active status of a partition will simply and silently break the EPBR chain in the Extended partition.The most detailed explanation/story on this bug is here:http://reboot.pro/topic/9897-vistawin7-versus-xp-partitioning-issue/(link already provided on the already mentioned topic http://www.msfn.org/board/topic/154633-partition-boundary-alignment-in-4096-byte-physical-sector-drives/ )If you have specific questions/doubts about something in there that you don't understand I will try my best (IF I can) to answer them.Why, are all the new >500 Gb drives made with Advanced Format?No, it is a matter of data density, information on a 250 Gb platter is already too "dense" for my likings.A typical 500 Gb 3.5" hard disk will have actually 2 platters 250 Gb each:http://rml527.blogspot.it/2010/09/hdd-platter-capacity-database.htmlAnything else will have either more platters or higher density platters.In both cases there are more probabilities of issues, IMHO.Another question:could the 512e emulation be disabled in the future, in order to directly access the 4k drive from a compatible OS (example: Windows 8+) and so avoid all the fuss?I think it depends on the specific model, the "AF" is not a standard and different manufacturers (and even the same manufacturer on the same model) may have made "simple" provisions for dong that (like a "jumper") or complex ones (like a "modified firmware") or none. jaclaz Link to comment Share on other sites More sharing options...
phaolo Posted August 23, 2013 Share Posted August 23, 2013 (edited) In order to make a partition (primary) active [...] The most detailed explanation/story on this bug is here [...]Uhh..ok.. I guess that loong example meant to prove that "Disk Management in XP does a lot of things that shouldn't really do".. right? Those problems, anyway, were caused by "using Vista and XP tool on the same disk", a practice I doubt I'll ever do (I'll also skip the evil Vista completely)The issue is not common [...] 2000 and later systems (up - as said - to XP/2003) default to use this approach when creating partitions, whilst later SO, starting from Vista default to use a "round to 1 Mbyte" (usually) alignment [...] This should in theory be of NO relevance whatsoeverErr.. so you're saying that Xp aligns partitions differently from new OS, but that's not relevant?Are you sure, can you please check the following links I've found about alignment?4K Sector Hard Drives by Seagate (search "4K aware" to skip to the point):- http://www.seagate.com/tech-insights/advanced-format-4k-sector-hard-drives-master-ti/Windows XP -- Creates primary partition with Alignment 1 condition (unaligned)Windows Vista-Pre Service Pack 1 -- Large sector aware but creates partitions incorrectly (unaligned) -->(maybe this caused the error in your example?)Windows Vista-Service Pack 1 or later -- Creates partitions with Alignment 0 condition (aligned)Windows 7 -- Creates partitions with Alignment 0 condition (aligned)[...] for systems that are still using Windows XP or Windows Vista, pre- Service Pack 1, there is significant risk of reduced performance -->I've read even 40% elsewereWD align utility:- http://www.wdc.com/global/products/features/?id=7&language=1If you do not change the partitions on a Western Digital USB or Firewire drive, the drive is already optimally aligned. [...] If you repartition a Western Digital USB or Firewire drive, WD Align should be run to optimally align the partition or partitions.(both links found in this nice page: http://mavmesa.com/what-you-need-to-know-about-windows-and-advanced-format-hard-drives/)Anything else will have either more platters or higher density platters.Ah, you're saying that too many or too dense platters = more possible hardware issues.Anyway, for me a twin drive for backups is enough to solve that fear (ok, unless they both break after 1 week lol)(P.S: does the 4Tb contain 5 x 800GB platters?) Edited August 23, 2013 by phaolo Link to comment Share on other sites More sharing options...
dencorso Posted August 23, 2013 Share Posted August 23, 2013 Anyway, for me a twin drive for backups is enough to solve that fear (ok, unless they both break after 1 week lol)No, that is bothersome, but still somwhat OK... Now, if they both break together 1 week after manufacturer warranty ends... Link to comment Share on other sites More sharing options...
jaclaz Posted August 25, 2013 Share Posted August 25, 2013 ON a "normal" 512 bytes sectored disk the difference (talking of modern, fastish disks with NCI and largish cache) is NOT noticeable at all, unless you are going to do a benchmark comparison, which does not on any way represent "real usage".My guess is that on 4 Kb sectored drive the difference may possibly be noticeable, but I won't buy the 40% figures . Somethign like 4% sounds like a much more "possible" max value (and I still personally doubt that it can be as much as that).On the already given thread there are related references and considerations:http://reboot.pro/topic/9897-vistawin7-versus-xp-partitioning-issue/?p=85960and remember that partition alignment only works for NTFS (which is normally "internally" already aligned to 4 Kb), it won't - wiithout special provisions - work for FAT16 and FAT32. I am not familiarwith/haven't looked into exFAT to say if this latter would be affected or not by filesystem misalignement like FAT16 and 32 are.(P.S: does the 4Tb contain 5 x 800GB platters?)Which disk model?The Seagate ones (still 3.5"):http://rml527.blogspot.it/2010/10/hdd-platter-database-seagate-35.htmlare seemingly:ST4000DM000 4 platters x 1 Gb eachST4000DX000 5 platters x 800 Gb eachjaclaz Link to comment Share on other sites More sharing options...
phaolo Posted August 25, 2013 Share Posted August 25, 2013 (edited) My guess is that on 4 Kb sectored drive the difference may possibly be noticeable, but I won't buy the 40% figures Well, ok then (you're still considering the AF emulation, right?).On the already given thread there are related references and considerations: http://reboot.pro/to...-issue/?p=85960I've seen that twice, but I REALLY couldn't find useful info on that difficult 3 page thread about multiboot Vista+Xp and Vista's wrong partitions! (my questions, then, were about Xp and AF drivers)Also, in a post you say: "WD Align seems like another tool to test [...] the WD Quick Formatter [...] is necessary in order to optimize the performance of the drive."Sorry, I'm totally confused.. Which disk model?WD My Book 4TB (oh s**t, the price has now jumped up from 180 to 250 euros! ) Edited August 25, 2013 by phaolo Link to comment Share on other sites More sharing options...
jaclaz Posted August 25, 2013 Share Posted August 25, 2013 (edited) Which disk model?WD My Book 4TB (oh s**t, the price has now jumped up from 180 to 250 euros! )Seemingly still available:http://www.lina24.com/go/product_info.php?&products_id=20754You can seemingly also manage to pay 999 Euros for it, though :http://www.amazon.it/Book-4TB-Hard-Disk-Esterno-USB/dp/B0099PFNV8/ref=sr_1_2?m=A1VKB71997SZAR&s=merchant-items&ie=UTF8&qid=1377441587&sr=1-2&keywords=Western+4TbGetting 2x2Tb each seems somewhat more realistic :http://www.pixmania.com/it/it/7318103/art/western-digital/hard-disk-esterno-my-book.html?tduid=7e027a3258c9183c1545b6a1df03f237http://www.ebay.it/itm/HARD-DISK-ESTERNO-2TB-WESTERN-DIGITAL-USB-3-0-WD-MyBook-Essential-HD-2-TB-/281148362763?pt=Unit%C3%A0_di_backup_Zip_Jaz_ed_Hard_Disk_esterni&hash=item4175bf900bjaclaz Edited August 25, 2013 by jaclaz Link to comment Share on other sites More sharing options...
phaolo Posted August 26, 2013 Share Posted August 26, 2013 (edited) Well, now it's back to 180 euros on Amazon. Wow, that's a variable price indeed.I'd like to wait for a good promotion, though.My idea was:master --> 1 new 4tbbackup --> 1 owned 2tb + 1 new 2tb or owned small old drives (sum<1.7tb)EDIT: 3tb currently costs only 10-20euros more than a new 2tb! I'll choose that and maybe in the future upgrade to a possible 5tb for a single masterThanks for the help Jaclaz.(anzi, ciao, perchè ho visto solo ora che sei italiano anche tu! XD) Edited August 27, 2013 by phaolo Link to comment Share on other sites More sharing options...
dencorso Posted June 18, 2018 Share Posted June 18, 2018 Quote I think that's precisely what this version of the WD Quick Formatter, http://download.wdc.com/misc/WD_Quick_Formatter_Win_1_2_0_10.zip does: set some undocumented feature in the Drive, to change it from exposing 512e to exposing 4Kn. The program requires no installation besides unzipping, FTW. Some more info: https://support.wdc.com/knowledgebase/answer.aspx?ID=3868 The above post was salvaged from those lost at the latest big forum crash, so it's out of context, but contains the most relevant info, so I'm posting it again. Attached below are crude .PDFs of the last 3 pages of this thread, as they were some days before the crash. I guess now all really relevant content from the lost posts is available again. 2TiB External USB Drive on Win XP Page 4.pdf 2TiB External USB Drive on Win XP Page 5.pdf 2TiB External USB Drive on Win XP Page 3.pdf Link to comment Share on other sites More sharing options...
Mathwiz Posted June 18, 2018 Share Posted June 18, 2018 Another solution might be a bare drive along with this ezDISK HDD dock: https://www.amazon.com/ezDISK-EZ0330-docking-station-compatible/dp/B0755P3R4H It has a switch to select 512-byte or 4K-byte sector sizes with AF drives. For XP use, just set the switch to 4K, plug in a nice, big, bare drive, and partition and format it as desired. For some reason it claims a 10TB limit. Not sure what that's about (I'd think it would work up to 17TB, if you could find a bare drive that big). 1 Link to comment Share on other sites More sharing options...
rloew Posted June 18, 2018 Share Posted June 18, 2018 10TB is probably the largest Drive they could get their hands on to test. There is no reason for the limit to be less than 17TB and the actual limit is probably much larger. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now