XPerties

Boy I sure hope those who like to listen to strangers take my warning...[b:4cd44d713d]stay away from PM7 when try to convert[/b:4cd44d713d]....Before it was released I was on the beta testing board for powerquest and know PM 7 inside and out, so trust me things can be accomplished but safty I think is what everyones after and ...well...lets just say you have a better chance of getting laid by maddona with the song "ray of light" playing while Bill Gates tapes it with a video recorder than you do having any good outcomes trying to convert 32 to NTSF or vis versa.But of course you could get laid and everything goes good....Try it and let me know, Ill tell maddona you said HI...:rofl :rofl :rofl :rofl -Xperties

The only time I run into this is when Im trying to download more than 2 files from the same website. Besides that Ive been download up to 10 files at a time and no promblem. -XPerties

[b:2bbc10f248] dazilla [/b:2bbc10f248] - Just for your information in case you ever decide to try it you should first get to know your bios. Find out what your temps are on you cpu and motherboard right now...during a burn in and idleing. There so much more to OC than just a few settings. Trust me, I have eveything over clocked to the max with 7 case fans, high performance heatsink w/fan, chipset fan, graphics fan, ram fan, and I run at a cool 32c cpu and 28c motherboard! Altho it took me weeks if not months to master the OC skills. -XPerties [b:2bbc10f248]Never try to OC unless you know your temps at a normal rate and you can watch in real time when you boot into windows after OC. Also you should never use standard crap that comes with cpu or video card. They suck.[/b:2bbc10f248]

xper....Nice shot...dam youe loaded with tats....I thought I had alot. Bah you were offline, but Ill be looking to see ya laterzs....I can just imagine everyone going to see use for tech support. haha....Ill be setting mine up later. Not to expensive, fairly cheap! -XPerties

No one can make modem drivers except the manufactor. I dont recall you saying the name of the modem. The only thing you can do is check the manufactor website to look for an update driver for it to work in XP. Also if its a combo pack like something that was included in a compaq you might want to check there site to. Always look under support when trying to find up to date drivers on there website. If all else fails try and see if the generic driver that XP supplies will work it. If that fails go buy a new one.....You have no choice . XP will only run on certain hardware. Before you installed it you should have ran the compatability check. -XPerties

a little more info...you get an error.....? Would be nice why it didnt work. -XPerties:rolleyes:

When you uncheck the box next time you go to shut down it will probaly give you a blue screen with a stop error. Post that for more help. -XPerties

The only thing I ever did was 1. Right click, extract here 2. Usually rar0 or rar1...samething right click extract here...this is where your bin/cue will be 3. If you have fireburner which is so easy just double click on the cue (might be the bin) and it will start up....If you want me extract the iso I will. -Xperties

Need more info....Your card, type, which drivers? -XPerties

He was refering to his sitution, he had overclocked his hardware so he had to back down on it. I wouldnt lower anything, like you said lose of performance. Im still checking out some things to find out what this error is exzactly. When I get off work tonight Ill check the newsgroups and see what anyone has found out. -XPerties

[b:bce756edfc]DO NOT USE PARTITION MAGIC OR ANY OTHER SOFTWARE TO CONVERT TO NTSF.....FOLLOW THESE INSTRUCTIONS![/b:bce756edfc] Converting to NTFS Using Convert.exe A partition can also be converted after Setup by using Convert.exe. For more information about Convert.exe, after completing Setup, click Start, click Run, type cmd, and then press ENTER. In the command window, type help convert, and then press ENTER. It is easy to convert partitions to NTFS. The Setup program makes conversion easy, whether your partitions used FAT, FAT32, or the older version of NTFS. This kind of conversion keeps your files intact (unlike formatting a partition. To find out more information about Convert.exe After completing Setup, click Start, click Run, type cmd, and then press ENTER. In the command window, type help convert and then press ENTER. Information about converting FAT volumes to NTFS is made available as shown below. Converting FAT volumes to NTFS To convert a volume to NTFS from the command prompt Open Command Prompt. Click Start, point to All Programs, point to Accessories, and then click Command Prompt. In the command prompt window, type: convert drive_letter: /fs:ntfs For example, typing [b:bce756edfc]convert D: /fs:ntfs[/b:bce756edfc] would format drive D: with the ntfs format. You can convert FAT or FAT32 volumes to NTFS with this command. -XPerties

Now how could the obvious be going to window$ updates and getting a piracy copy of office xp or a crack for it. :spaced -XPerties

Just cont. It will replace the files else where. I had the samethihng happen. DOnt worry XP fixes it self. -XPerties

Ive got office XP +Frontpage 2002 with a master key...no activation. If you want it leech it rick. [b:aa846d052f]piaqt[/b:aa846d052f] are you trippin, whats with the updates website...:spaced -Chris

Get it here guys, Preety cool! -XPerties Messenger PLUS!

Updates are finally out. Get them here..... ht*p://www.roxio.com/en/support/ecdc/xpup.jhtml;jsessionid=LEBGGBYVH5MHBT33IAVR3KQ#xp -XPerties

buddy, the promblem is its not like if you owned a Nvidia card you would have choices on drivers. you own that voodoo card and you get no other choice. Best solution is to try to get them to work. Im not sure I understand what you mean by they dont work? -Chris

Go here to get XP drivers for your card..... ht*p://www.guru3d.com/files/ -Chris

yes that what I was saying. The boot.ini file is under windows 2000. Isnt win2000 on your c: drive? Thats where its located. -Chris

Now thats top secret, If I told you I would have to kill you....Just joking...That would be a question for fthrJack. Hes the creator of the boards. -Chris

Any ideas on memebers? Uh just make it known and stay up to date with news, It will get popular -Chris

Thank you.....I worked hard and long on it...It took me weeks (Shut up rick, tris, Aaron, xper, aMB, BAH:rofl :rofl :rofl )... No really the credit goes to fthrjack....for he is the creator of this world we all dwell in...blah blah blah, but if it wasnt for his hard a** working mods and admin it wouldnt be what it was today...holly crap Im just praising everyone, ok ok ok enough pats on the back! lol Welcome to the forums, Take some time out and make your stay here alot easier on everyone if you could just breeze through the forum rules. You can find a link in my Sig below. -Chris

Hey gab, your site looks alot like mine.....lol, wierd huh? Oh by the way, your forums on there...Im thinking you shouldnt be able to post in the admin and mod section should you? Also my site runs just fine on f2s and i have never had it go down on me before. Boy are those pop up annoying on your site:grump :grump -Chris

Oh yah, Good one Lou, Forgot about the boot.ini file being located on the first OS.:spaced -Chris

This version isnt retail you bought from a retail store is it? If not then sure its cracked....retail does not come already cracked.....AGAIN I feel a little confused about your question? -Chris