FlippX Posted May 9, 2012 Share Posted May 9, 2012 Hah, finally I got my pw back (in mind)!!So first of all I'd like to say: "Thank you problemchyld!!"Now before testing your stuff, could someone please tell me a reliable os-backup-software that works with win98se ?!?!I got 2 hdds over here, but I guess just copying the win-dir over as a backup won't work...Thanks again. Link to comment Share on other sites More sharing options...
JorgeA Posted May 9, 2012 Share Posted May 9, 2012 Hah, finally I got my pw back (in mind)!!So first of all I'd like to say: "Thank you problemchyld!!"Now before testing your stuff, could someone please tell me a reliable os-backup-software that works with win98se ?!?!I got 2 hdds over here, but I guess just copying the win-dir over as a backup won't work...Thanks again.Windows 98 has a native backup function (Start --> Accessories --> System Tools --> Backup) which seems to do a complete disk backup; at least the size of the archive files created seems to parallel the size of the hard drive's contents.I've used it (putting the backup on USB thumb drives), but I should say that I've never actually tried to restore a hard disk from it so I can't state for certain that it works.Good luck!--JorgeA Link to comment Share on other sites More sharing options...
Fredledingue Posted May 9, 2012 Share Posted May 9, 2012 (edited) FlipXA simple copy of the files on a CD-R/DVD-R or on another HDD, or on another medium is enough to restore 95% of your system.Remains the registry but a registry backup is also present among the files you will copy as a back-up.If your system files back up is not too old, it will be possible to restore a valid registry after copying all the files back.Then normaly 99% is restored. (Save 1% of unkowns.)Note that recopying the files back may have to be done through another OS (if any) or through DOS or through a boot Floppy or boot CD.All these methods may require some knowledge so take the time to look for the informations and how-to about the way you will restore/recopy your files in case of problem.Also read the IMPORTANT NOTICE on the u98sesp's webpage.There is a rapid summary on how to do this.Of course all other, more complete and more advanced methods presented by all the smart poeple here are also valid. Edited May 9, 2012 by Fredledingue Link to comment Share on other sites More sharing options...
bristols Posted May 10, 2012 Share Posted May 10, 2012 @PROBLEMCHYLDWhy didn't you include Apmbatt.sys 4.10.2227 from 306889?The file inside the hotfix is Apmbatt.sys 4.10.0.2224My apologies. My notes are wrong and I didn't check the file. Since, after my initial PM to you, I hadn't heard back that the update was surplus, I wondered if there was another reason for its exclusion....why not? I mean to choose whatever suits me best, works best when I know what's there to choose from..But you don't know of any problem the backup software can produce and out of that reason didn't mention it, right??Oh and btw.One problem with new software is that it might install some new incompatible systemfiles, is it a good idea to protect some files from overwriting?? ..Like in "modern" windows..This is NOT a backup topic. START your own topic and quit getting on my nerves Thanks to tomasz86 for suggesting a free and very able alternative to the proprietary Ghost (helps to counterbalance some of the less charitable replies ) Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted May 12, 2012 Share Posted May 12, 2012 Added HIDCLASS.SYS 5.0.2163.1 Windows 2000Added HIDPARSE.SYS 5.1.2600.5512 XPSP3Added HIDUSB.SYS 5.1.2600.5512 XPSP3Added HIDVKD.SYS 4.90.3000.0 WinME CDAdded ROOTSUPD April 2012Added SBP2PORT.SYS 4.90.3002.0Added SBP2SCAN.SYS 4.90.3000.0 WinME CDAdded USBCAMD.SYS 4.90.3000.0 WinME CDAdded USBCAMD2.SYS 4.10.0.1998 WinME CDAdded USBHUB.SYS 5.0.2195.7006 Windows 2000 SP5Added USBINTEL.SYS 4.90.3000.0 WinME CDAdded USBUI.DLL 4.90.0.3000 WinME CDUpdated USBSTOR.INFI have been testing USBHUB.SYS 5.0.2195.7006 Windows 2000 SP5. It works with no issues on intel boards. I'm not sure what troubles it will bring for VIA controllers/chipsets. Link to comment Share on other sites More sharing options...
tomasz86 Posted May 12, 2012 Share Posted May 12, 2012 @PROBLEMCHYLDIt's Usbhub.sys 5.0.2195.7006 buggy? Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted May 12, 2012 Share Posted May 12, 2012 (edited) @PROBLEMCHYLDIt's Usbhub.sys 5.0.2195.7006 buggy?I don't have a USB modem, but I do have digital cams/usb flash drives. It works on my system with no problems. Some say other files were buggy, but I added them to service pack. You get better results on a clean install. I prefer to test on a clean install, that way you are only dealing with system files. You are able to pinpoint problems that way. Edited May 12, 2012 by PROBLEMCHYLD Link to comment Share on other sites More sharing options...
FlippX Posted May 12, 2012 Share Posted May 12, 2012 Funny how some useful posts vanish... ...bloating a 70page thread, haha...However, just have a look at the u98sesp3-dl-page. In big red letter there is written:"ALL THE PROBLEMS AND ISSUES WHATEVER THEY ARE CONCERNING U98SESP3.EXE MUST BE POSTED ON THE FORUM."And if one recommends making a backup, why not tell how?? Especially if the answer can be as simple as "http://clonezilla.org/" ..thanks for the hint again.. Link to comment Share on other sites More sharing options...
loblo Posted May 13, 2012 Share Posted May 13, 2012 Funny how some useful posts vanish... ...bloating a 70page thread, haha...However, just have a look at the u98sesp3-dl-page. In big red letter there is written:"ALL THE PROBLEMS AND ISSUES WHATEVER THEY ARE CONCERNING U98SESP3.EXE MUST BE POSTED ON THE FORUM."And if one recommends making a backup, why not tell how?? Especially if the answer can be as simple as "http://clonezilla.org/" ..thanks for the hint again..No posts have vanished, they've just been moved here: Link to comment Share on other sites More sharing options...
LoneCrusader Posted May 13, 2012 Share Posted May 13, 2012 (edited) [i have been testing USBHUB.SYS 5.0.2195.7006 Windows 2000 SP5. It works with no issues on intel boards. I'm not sure what troubles it will bring for VIA controllers/chipsets. @PROBLEMCHYLDIt's Usbhub.sys 5.0.2195.7006 buggy?I don't have a USB modem, but I do have digital cams/usb flash drives. It works on my system with no problems. Some say other files were buggy, but I added them to service pack. You get better results on a clean install. I prefer to test on a clean install, that way you are only dealing with system files. You are able to pinpoint problems that way. The specific bug I saw mentioned in those links seems to only apply to a USB1 modem under Win2K. Windows 9x has it's own native USB1 driver stack and AFAIK does not use the USB2 drivers at all for USB1 hardware. Probably needs further/broader testing.EDIT: Misread. See next posts. Edited May 13, 2012 by LoneCrusader Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted May 13, 2012 Share Posted May 13, 2012 The specific bug I saw mentioned in those links seems to only apply to a USB1 modem under Win2K. Windows 9x has it's own native USB1 driver stack and AFAIK does not use the USB2 drivers at all for USB1 hardware. Probably needs further/broader testing.Thanks You are awesome LoneCrusader. Link to comment Share on other sites More sharing options...
LoneCrusader Posted May 13, 2012 Share Posted May 13, 2012 Thanks You are awesome LoneCrusader. Hang on a sec, I think I may have misread. I thought you had found a newer Win2K "USBHUB20.SYS."If it is indeed just "USBHUB.SYS" it will replace a 98SE USB1 driver stack file. Not to say that it may not work fine under 98SE, just needs more extensive tests.Trust me, I've been seeing a lot of headache with USB driver stack files lately. Not as much as someone else I know, but enough. Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted May 13, 2012 Share Posted May 13, 2012 Thanks You are awesome LoneCrusader. Hang on a sec, I think I may have misread.I thought you had found a newer Win2K "USBHUB20.SYS."If it is indeed just "USBHUB.SYS" it will replace a 98SE USB1 driver stack file. Not to say that it may not work fine under 98SE, just needs more extensive tests.Trust me, I've been seeing a lot of headache with USB driver stack files lately. Not as much as someone else I know, but enough. OK It'll be a few months before I release 3.1. Hopefully someone with a USB modem can test. Thanks again LC B) Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted May 13, 2012 Share Posted May 13, 2012 (edited) I thought you had found a newer Win2K "USBHUB20.SYS."The version in the service pack is definitely the last for Win98.Have you notice in the spoiler, only newer files from 2000/WinXP will be added.I also added WinME USB only files.. MDGx 98SE2ME can take care of people who want to swap out files.We are @ about 300 downloads on SP3 and only had a few problems. I have to say we all have done a great job.Now that we have all the Win98SE updates, I can focus on newer files from 2000/WinXP WDMSTUB.SYS does work wonders, but unless more functions get added to the STUB then we will be cut off.I have been testing wifi/wireless cards, and have posted the missing functions in the proper thread. Edited May 13, 2012 by PROBLEMCHYLD Link to comment Share on other sites More sharing options...
DougB Posted May 14, 2012 Share Posted May 14, 2012 Hopefully someone with a USB modem can test.Ok, i have a couple of USB tele modems (not currently installed) and would be willing to test, but here's the rub: 1) The system i've been using to test uSP 3.0 final is kind of ancient (PII/i440) and only has USB 1.1. 2) My main system is somewhat newer (P4/i845) and has USB 2.0, but i'd have to first install uSP 3.0 final over currently-installed uSP 3.0b4. I'd be a bit nervous about doing that over the next couple of weeks, because it's my primary link to work and the 'net... and i have some work projects that'll be due. For the same reasons, i can't do a new, clean install right now. But i do want to help the project along, so maybe i'll just bite the bullet and give it a go anyway. Let me ponder.... Any feedback is appreciated.... - Doug B. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now