bookie32

Hi again! Well, this has nothing to do with my changing any settings...after upgrading to Internet Explorer 10 this started happening on all my computers. So, the question is "What have they changed in Internet Explorer 10 that can be causing this?" Microsoft...you can love them or hate them....!! bookie32

Hi folks! Hope everyone is well! I am trying to sort my favourites into categories and every time I drag from one folder to Another I am being warned about security settings for Internet Explorer....I have reset Internet Explorer - but it is still there? Is there something I am missing here? bookie32

Hi Mate! Thanks for that...seemed to overlook that.... I will let my customer know and get the 32bit version installed. Martyn

Hi Guys! I have aproblem trying to scan and then send to computer email from a Brother DCP9010printer. I have goneinto settings for this printer and it is set to open Outlook 2010 but it readsthe document and then throws up roughly the following error: "Eitherthere is no default mail client or the current mail client cannot fulfill themessaging request" error message when you send e-mail from third-partyprogram in Outlook… This messageis in Swedish, but that doesn't matter lol… I havechecked settings and Outlook is supposed to be set to the default email program… This iswhere I don't understand what could have happened…I have just bought a newcomputer and set it up for the customer installing her required software etc. I installedMicrosoft Office 2010 Standard for Small Businesses 64bit version…theinstallation didn't give any errors until the software from Brother seemed tocause a hiccup.. On googlingfor the error I was led to this info: When Ichecked under: HKEY_LOCAL_MACHINE\Software\Clients\Mail\... There wasno Microsoft Outlook…there was a listing for Windows Mail and Windows Live Mail…butno Outlook? I ranrepair of Outlook and low and behold there was a listing for Microsoft Outlookafter the repair?! I thenretried the Scanning to computer email from the printer, but the same errorcame up? The infostates that I should remove the subkey, but which is the subkey of all thedirectories under the HKEY_LOCAL_MACHINE\Software\Clients\Mail\MicrosoftOutlook… There arethe following: Capabilities Envelope Installinfo Protocols Shell Or do Ijust remove the whole of Microsoft Outlook and then restart Outlook? I am justwondering why Microsoft Outlook didn't exist before running repair and thenaccording to the info I remove it and then run repair again….just seems like awaste of time… Can someonegive me some feedback on this, please! bookie32

Hi Nearly missed this....lol bookie2

Hi guys Some interesting stuff....lol I can still do what I want even if I have to go around the houses to do it....good old Microsoft..... On another note.....keep getting asked about upgrading to Windows 8.....lol People want the latest even if you tell them it is crap.... Thanks for your time guys! bookie32

Hi again! I see this thread died a death.....lol bookie32

Hi again! It is probably me not explaining my self...taken pics again and they are here. In the first I have clicked on Dokument on the left and on the right I have the contents of My Documents. I then click and open PHOTOSHOP from the files on the right as shown by the red box on pic1. When I open it that way there are no folders with all my documents in their own folder....I just get all documents in PHOTOSHOP as shown in pic2. In pic three I have clicked on the arrow beside Dokument in the left menu and then open PHOTOSHOP that way and you can see my folders with files in their own folders... Why are the contents of all those folders shown in pic2? I have always clicked on Dokument in the left menu and then gone to PHOTOSHOP from the right, but now I just get all the documents together instead of their own folder. Any other folder I click on from the right has its contents as they should be and I can create more folders, but not in the case of PHOTOSHOP? There are 16 folders in PHOTOSHOP and in pic2 there are just documents?" It has always worked before... bookie32

Hi jaclaz! Might of known you would be around....lol OK! can't upload here any more?! Put the pics on skydrive for you to have a look at... PIC1 I have gone via the left menu "Bibliotek" and clicked on the arrow by "Dokument" and just opened the menu there no problems... PIC2 I have gone via "ME" on "H" drive and no problems... PIC3 I have just clicked on "Dokument" in the left menu and then gone into PHOTOSHOP from the right and then it is as shown. If you look at the top you will see on PIC1 and PIC2 it has "Ny Mapp" (new directory/folder) but not on PIC3 bookie32

Hi again! OK! I have managed to copy files to the folder PHOTOSHOP and see them in their allotted folders, but there is something wrong somewhere… I can provide pictures if needed…although Swedish…lol OK! This is the situation. I moved my user account to another drive and in this instance it is H:\Martyn\mina document\PHOTOSHOP. If I open a direct link to that hard drive and PHOTOSHOP it shows my file structure as normal… If I open explorer and then look at my folder structure on the left I have Library: Pictures, Document, Videos, and Music. If I click on “Document” it opens that folder and gives me my file structure on the right- but if I click on PHOTOSHOP on the right it opens with no file structure and no folders?! What is even more strange is if I click on the arrow by “Document” on the left to see all folders in My Documents – I can then click on PHOTOSOP and it shows the right file/folder structure?! If you don’t understand my ramblings – then say and I will put up some pictures. Bookie32

Hi guys! Do not understand this.... I had created a file system on one computer running windows 7 and tried to update the same file system on another computer....nada?! After checking my files matched each other I erased the unsorted files and tried to replace them with the new ones all sorted in their folders...When I transfer them they are unsorted and without folders?! I have tried looking at the folder PHOTOSHOP on the computer I am trying to update and sure enough I can't create folders in it? I have erased it created a new folder and as soon as I name it PHOTOSHOP it denies folder creation....don't understand...I haven't changed any user rights etc. Does anyone have any ideas.... bookie32

Hi guys! OK! this is crazy......Internet Explorer 9 is a free choice upgrade, but some programs are stopping support for IE8, so the free choice becomes a necessity.......lol. I helped a customer upgrade to IE9 and when we restarted there was an icon "The Internet" on the desktop....lol I started IE and it was in fact English instead of Swedish?! I removed the culprit and insalled it manually.... Now all is well with the world again... My obvious question is why? I have looked after her computer for some time and there is nothing remotely English about any settings.....I get the feeling that Microsoft is losing the plot...... What is even worse I have my suppliers boasting about the new Windows 8...how good it is with all its new functions etc....Only idiots will buy it.....lol bookie32

Hi again! One thing I have noticed that I have no idea about is Embasy Security? It is an acer x275 which comes with this installed..... Just wondering if that is causing problems? bookie32

Hi MagicAndre1981! I have already tried those options when clicking on the link from failed install. bookie32

Hi guys! Customer came with a virus infected computer....virus is no longer...but I can't install msi? I have remove all traces of a nonworking mcaffee... and can't see anything else that would stop the installation? Have followed the install advice if having problems...nada.... How do I install this without reinstalling the computer...? Thanks as always! bookie32

Hi folks! OK! I tried to add some drivers to an offline image and got an error 4350? I checked the log and and found this entry for the time I was trying to add drivers: 012-09-11 09:10:24, Info DISM DISM Image Session: PID=2932 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect 2012-09-11 09:10:24, Info DISM DISM Provider Store: PID=2932 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider 2012-09-11 09:10:24, Info DISM DISM Provider Store: PID=2932 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider 2012-09-11 09:10:24, Info DISM DISM Provider Store: PID=2932 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect 2012-09-11 09:10:24, Info DISM DISM Provider Store: PID=2932 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider 2012-09-11 09:10:24, Info DISM DISM Provider Store: PID=2932 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider Edit: Something weird... I mounted my image..17 210 034 254 and tried to add my drivers and received the error above... So, I unmounted it again and it is larger than before... 17 231 771 003? I did not see any adding of drivers?..... That is all I can see for the error....does this mean anything? bookie32

Hi again! Just a little update... the wim image I was converting wasn't sysprepped, so I added the motherboard drivers for the computer the image came from and then it was OK Thanks! bookie32

Hi again! Well, I could use the script and convert my wim to a vhd.....BUT Is it necessary to sysprep the wim before converting to vhd.....because I am getting a BSOD with 0x0000007b which suggest driver problems...? If I don't need to sysprep the wim file - then maybe I need to inject ms drivers into the wim before converting to vhd? I am just guessing here and would appreciate some feed back..... Thanks! bookie32

Hi jaclas! I did read that, but it wont be the first time Microsoft has botched information concerning what you can and can't do.... I will run the old script and see how that works.... Thanks for you patience....lol Well, it is nice to know that I get told now that I need windows 8.... Windows(R) Image to Virtual Hard Disk Converter for Windows(R) 8 Copyright (C) Microsoft Corporation. All rights reserved. Version 6.2.8424.1.amd64fre.fbl_core1_hyp_dev(mikekol).120517-1616 Release Preview WARN : Transcription is already running. No Convert-WindowsImage-specific transcript will be created. ERROR : Convert-WindowsImage requires Windows 8 Consumer Preview or higher. Please use WIM2VHD.WSF (http://co de.msdn.microsoft.com/wim2vhd) if you need to create VHDs from Windows 7. INFO : Log folder is C:\Users\ADMINI~1\AppData\Local\Temp\Convert-WindowsImage\6d1e4277-b0e9-4c86-b304-3cc3b8 e3e5f9 INFO : Done. That told me didn't it bookie32

Hi MagicAndre1981 No.....I didn't see anything written about that, but will get to that now. Powershell 3.0 installed without problem....which is a bit strange... I will have a look at what you have mentioned and post a little later... Thanks for coming by! bookie32

Hi guys OK! here is the case....lol I have been looking at converting wim's to vhd's in order to run them in Hyper-V... I heard there was a nice script for this and downloaded it...here I then saw at the script had been rewritten to work on Powershell 3.0 and upgraded to that on my Windows Server 2008r2.. I didn't get any errors installing Powershell 3.0 and thought everything was OK..... I like user interfaces...lol and this guy wrote about the script containing a gui I ran the user interface command from Powershell 3.0: .\Convert-WindowsImage.ps1 -ShowUI I received the following error which seems to point to a problem with netframework: Windows(R) Image to Virtual Hard Disk Converter for Windows(R) 8 Copyright (C) Microsoft Corporation. All rights reserved. Version 6.2.8424.1.amd64fre.fbl_core1_hyp_dev(mikekol).120517-1616 Release Preview WARN : Transcription is already running. No Convert-WindowsImage-specific transcript will be created. ERROR : Could not load file or assembly 'System.Linq, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7 f11d50a3a' or one of its dependencies. The system cannot find the file specified. INFO : Log folder is C:\Users\ADMINI~1\AppData\Local\Temp\Convert-WindowsImage\c45aa02b-3d48-4059-9c71-ac1660 3ae632 INFO : Done. Does anyone have any idea how to fix this? Or have a better suggestion about conversion from wim to vhd? bookie32

Hi Mate OK! That is kicking my arse big time........ I will get there and start my reading..... Thanks for your patience! bookie32

Hi guys I know I probably will get my arese kicked on this one, but swamped with reading material on subject and don't really know where to start....... I am trying to make a general installation of windows that I can use on all my computers, with all program software installed, and install it via a USB..... I don't know if there are any pitfalls that I should know about..... At the moment I am building my wim in VMWare and if I am going to use that as my "install.wim" are there any limitations? What is the best way to capture my installation if I am going to use it as my "install.wim"? I don't need any user info remaining...just all my programs already installed..... If I understand this correctly - I need to capture the installation and then implement it to my so called DVD image that can be applied to a USB? Is there a limit to the size of the "install.wim" when installing from a USB? I have a 32GB Transcend 3.0 which I thought would be the drive for this project..... Please bear with this old fart and his ramblings...... Thanks! bookie32

Hi Mate! Thanks for clearing that up for me... Hopefully one learns something new every day.....I did say hopefully bookie32

Hi Tripredacus OK! I appreciate the information... I read up a little abourt SRT and, like you say, don't seem to work very well from WAIK... The SRT packages were on the list of packages to install and when I couldn't find them it prompted the question... My winpe's seem to be working fine at the moment.....we will see when I test some of the functions... Thanks again for coming by! bookie32