Hi .

i m using Nlite 1 final and Ryanvm update pack 2.0.7a and couple of addons and after finalizing the cd and installing windows everything is fine but when the installation finish and restart the pc to the final stage the system restart the pc , i dont even get to see the windows logo or bootscreen . i did 4 cds before and i never got such a problem , im sure its not a hardware problem as i used another cd with an older pack and i got everything working .

i pressed f8 and disabled the erstart on system failure and i got the blue screen of death telling me that the system shutdown to prevent damage to my pc .

Any idea whats happening and how to solve this ?

i had same problem with 1.0 use rc8

Hi .

i m using Nlite 1 final and Ryanvm update pack 2.0.7a and couple of addons and after finalizing the cd and installing windows everything is fine but when the installation finish and restart the pc to the final stage the system restart the pc , i dont even get to see the windows logo or bootscreen . i did 4 cds before and i never got such a problem , im sure its not a hardware problem as i used another cd with an older pack and i got everything working .

i pressed f8 and disabled the erstart on system failure and i got the blue screen of death telling me that the system shutdown to prevent damage to my pc .

Any idea whats happening and how to solve this ?

I'm having the same problem exactly just llke you soulkeeper. I'm using RyanVM Update Pack v2.0.7a and nLite v1.0 Final.

I noticed that installation reach 10 minutes and then it JUMPS DIRECTLY to 2 minutes then to 1 and then it restart again and again and again without showing even the boot screen.

I tried the CD on VMWare an it WORKED without any problem.

BTW, my system is NF4 based, and I'm using RAID.

I hope this information can help you to descover the problem Nuhi...

Edited July 1, 200620 yr by BelowSky

i tried ryanvm 2.07a

also tried boogy's update pack,

same error with 1.0 if you use rc8 it works fine, with both update packs.

I had the same thing happen to me. I Fixed it by taking out the nvidia storage driver.

Good afternoon.

I am experiencing the same problem as BelowSky reported.

Run a P4 machine and using the ICH5R controller for the raid.

Hope to solve it soon

Cheers

Good morning.

Does anyone has a solution for this problem or any hints? Last night i tried several things for hours without any luck. If anyone knows pls inform .

anyone here bother to attach the nlite preset?

thx

I attach my preset boooggy.

Hope that it will help to solve the problem.

Cheers!

Edit: filename_u.ini removed

Last_Session.ini

Edited July 2, 200620 yr by koulis13

koulis13 edit your presets and remove the filename_u.ini....cause it contains info that u should not post......

Ok, hope for solution

Is is something wrong with the drivers for the ich5r controller? I read on this forum that the same thing is happening for the nf4 based machines while using the raid fetaures.

Same problem,Please help..i tried creating the whole project 3 times and still get the same problem. The Winsows XP ISO file works on VMware, the windows starts and everything but when i burn it on cd and install on computer, it keeps on restarting after installation has finnished.

i am too having this problem. (ich5r) I dont think it has to with ryanvm's pack as I also get the problem without using it. just nlite 1.0fi....

this sucks, no one to blame of course but I was a bit to trigger happy to reinstall my pc with the newest stuff.....

Att. the settings I used......

Anyone please?

Last_Session.ini

Are you all using a sata hard drive?