One more successful install of rc3! On a 400Mhz - 32 Mb ram laptop this time!

(1st install of uSP ever on this laptop)

B)

(just to avoid having a forum with only bad bews! )

I got the bootlog, thx Gape.

Here is the contain;

--deleted by Gape, because it's too long--

I got the bootlog, thx Gape.

<{POST_SNAPBACK}>

Your Bootlog.txt file looks OK.

Other ideas:

Try to update all of your drivers (especially mainboard, and sound drivers). Try to install SP 2.0 again.

Latest status: 888113, and 891711 (Tihiy's) hotfixes are added, and fixed 98lite Sleek uninstallation problem.

Everything seems OK. I will test it today and tomorrow. I hope I'll release 2.0 FINAL in this weekend.

Thanks for your support!

Latest status: 888113, and 891711 (Tihiy's) hotfixes are added, and fixed 98lite Sleek uninstallation problem.

Everything seems OK. I will test it today and tomorrow. I hope I'll release 2.0 FINAL in this weekend.

Thanks for your support!

Have you tested new MS hotfix? Have you tested my hotfix?

Have you tested new MS hotfix? Have you tested my hotfix?

<{POST_SNAPBACK}>

I tested your fix, it works great, but I haven't tested MS's new fix. In fact, I don't like MS's fix. It requires a seperate process to load.

Your Bootlog.txt file looks OK.

Other ideas:

Try to update all of your drivers (especially mainboard, and sound drivers). Try to install SP 2.0 again.

Thx for the advise, Gape. I'll try to update my mthbrd driver.(VIA chips) But my creative sound card 'Live!' no more updated driver.

So I assume I need to uninstall 20rc3 first, then I install my mthbed driver. Later to install the 20rc3 is a final step.

You're right. But i've found a lot of bugs in Revolutions Pack 2.9.

My hotfix is based on Revolutions Pack 2.5, which does not contains those bugs, but it can contain others. Look if any dummy 0-byte files are located in the root of the drive.

(i haven't found any)

And remember that semi-slipstream method can fail (windows will load without icons ) without TI...dll.

So I assume I need to uninstall 20rc3 first, then I install my mthbed driver. Later to install the 20rc3 is a final step.

<{POST_SNAPBACK}>

Don't uninstall it. You can install it again without uninstalling.

Update your drivers, and install the SP again.

Did you fix something in DUN, it's working better that it ever has, faster. If not it must be a byproduct of other fixes/updates in 2rc3

Hi.

Missed DCOM 1.3 registry entries in Unofficial SP.

-------------------------------------------------------------------------------------

AddReg=OBJREFRegKeys

DelReg=DelRegOnInstall

[OBJREFRegKeys]

HKCR,CLSID\{00000327-0000-0000-C000-000000000046},,,ObjrefMoniker

HKCR,CLSID\{00000327-0000-0000-C000-000000000046}\InprocServer32,,,ole32.dll

HKCR,CLSID\{00000327-0000-0000-C000-000000000046}\ProgId,,,objref

HKCR,objref,,,URL:Objref Protocol

HKCR,objref\CLSID,,,{00000327-0000-0000-C000-000000000046}

[DelRegOnInstall]

HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\DCOM95

HKLM,System\CurrentControlSet\control\SessionManager\CheckVerDlls,ole32.dll

HKLM,System\CurrentControlSet\control\SessionManager\CheckVerDlls,olethk32.dll

HKLM,System\CurrentControlSet\control\InstalledFiles,rpcltc1.dll

HKLM,System\CurrentControlSet\control\InstalledFiles,secur32.dll

HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Migration\100,DCOM95

-------------------------------------------------------------------------------------

Of course, the following 4 lines may not need.

HKLM,Software\Microsoft\Windows\CurrentVersion\Uninstall\DCOM95

HKLM,System\CurrentControlSet\control\SessionManager\CheckVerDlls,ole32.dll

HKLM,System\CurrentControlSet\control\SessionManager\CheckVerDlls,olethk32.dll

HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Setup\Migration\100,DCOM95

Missed DCOM 1.3 registry entries in Unofficial SP.

<{POST_SNAPBACK}>

Thanks HSI.

A question concerning the "runpost.bat":

if exist %winbootdir%\system\iosubsys\SMARTVSD.VXD goto end

why should the batch end here, when SMARTVSD.VXD is present?

SHELL32.INF or SLEEK.INF and PATCHRE, PATCHNP, q240308-update won't be executed.

Is the behaviour really wanted this way?

A question concerning the "runpost.bat":

if exist %winbootdir%\system\iosubsys\SMARTVSD.VXD goto end

why should the batch end here, when SMARTVSD.VXD is present?

SHELL32.INF or SLEEK.INF and PATCHRE, PATCHNP, q240308-update won't be executed.

Is the behaviour really wanted this way?

<{POST_SNAPBACK}>

Thanks swgreed, looks like a bug.

Please also look at this post.

Please also look at this post.

<{POST_SNAPBACK}>

Thanks, I could fix it in the meantime...