stasys44

No need to run WPI from CD There is a folder $OEM$ and subfolders $1 $$ in it - on my DVD root. WPI is copied to systemdrive during Windows instalation. I run WPI after Windows instalation by GUIRunOnce Here is a fragment from winnt.sif: [GUIRunOnce] command10=%systemdrive%\wpi\htaconfig.cmd When you need to install some programs that was not post-installed you are able to run WPI using CD autorun (start menu > your_run_wpi.cmd > %systemdrive%\wpi\htaconfig.cmd).

Dr. Hoang Thank you for files. I certainly will try to accomplish this job, but i am too busy now, range not alone direction, and my wife's birthday.

DrHoang I supposed that BCDW2 supports very narrow range of ISO's. I used only ACRONIS products ISO's. BCDW2 does not support any Linux LiveCD ISO (Knoppix, Movix, Suse), any Windows Xp installation and LiveCD ISO. I did not think that it would support ISO's with folders within ISO (for exemple, there is folder BootCD in Hiren.ISO and so on). I will try with them you have mentioned. Now, when some words are written to this topic theme, i may express my opinion - am not categorical, your Title Caps do not disturb nor irritate (there are no hellllp, newww and !!!!!!), the essence is - you are not shouting in your post.

DrHoang and jaclaz You are both right! 1. If someone has single HDD as one partition, this partition m a y b e mostly formatted as NTFS (do not regarding to minuses, for me NTFS has one plus - large file possibility) recommended for NT windows. 2. But the best way to have two partitions: FAT32 for OS and Program Files NTFS for data Now my OS partition takes 8 GB and have free space, as now I do not experiment with some OS. I always strongly recommend the second version. Quick booting and access to Win files, in case of seriuos OS crash restore partition from Image in few minutes. So, I am going to try install XPE and DOS on HDD after some preparation. I use Acronis Disk Director not Partition Magic. I should read more careful your article, Dr. Hoang

Ooops, sory I saw what i want to see. Excuse me.

DrHoang Cannot find SysXPFat.com I think i'm not alone who searches it

n00dles Could you share files: ntldr, ntdetect and ramdisk.sys from a Windows Server 2003 + SP1 source

There is another topic that is earlier than here, why to create the same? (For your attention there are useful articles from www.911cd.net forum (I am guest there)) Dr. Hoang posted 14th August MSFN Forums > Unattended Windows Discussion & Support > Windows PE >Help in run Bart PE from HD ?!: DrHoang Regarding the article "How to run XPE in hard disk" I made another partition for XPE and copied folders and files, renamed files, made this partition primary, hide my partition with Windows XP. (My second HDD with FAT partition FDD does not see?) But I got error - Cannot find Autocheck and reboot.

Cordial greetings, Dr. Hoang I thought that just your nickname is doctor and just dare to post this greeting as i'm older you. Hope to meet you in the forum regarding WinPE-BartPE. Kaunas, Lithuania, the center of Europa

francobo76 Parla inglese. Voi trovare la soluzione mas subito. As I understood you are not glad for order of apps installation in WPI. I think you should previuosly search in WPI and post there if not found the solution

Two weeks ago was I catched this idea and edit my htaconfig.cmd: My [wpi] folder is in the root, not in the [install] folder. 0 - basic 1 - media 2 - maintenance 3 - all 4 - games ** press 0, 1, 2, 3, 4 digit to meet system configuration Every configuration has its style - wallpaper, apps, wpi.css (to change font colors) advancedservers posted 27 July AUTO CONFIG

How many there are of us Lithuanians? you, Maniaq, yu'r very active - 300 posts vid0 masterj loras juozas and i from Kaunas, stasys44 and ...

As ccfly I have same error. Back to RC3

It's very nice program and it's OK for me, but I cannot apply different colours to cathegories I want to stress: Now I have one colour for all cathegories - #103060 (my wallpaper is light).

@ Vier I had problem: Si'l vous plait - you should not perform deep integration of the RyanVM updates, like in the first versions, that's do not launch _integrate.exe (Please follow instructions up to this point) =====driver.cab and sp2.cab will not be extracted, will not replaced the files inside with the updated files and driver.cab will not be rebuilded and references to sp2.cab will not be removed.===== Ensure the files from Home (or Pro) folder are copied to i386 folder. The problem is gone.

I have problems with last versions (5.07...-5.06...) As usually first of all I integrated Rayan updates and after this Driver Packs. It was OK for earlier versions. Now happens this: After Rayan updates are integrated I have not sp2.cab in i386 folder, nor any entry in txtsetup.sif and dosnet.inf files. After Driver Packs are slipstreamed the sp2.cab entries in txtsetup.sif and dosnet.inf files appear! I delete them as the setup will not work. But when Windows is installed after every logon I have: ___________________________ rundll32.exe Unable to locate Component This application has failed to start because framedyn.dll was not found. Re-installing the application may fix this problem OK ____________ I hit OK and other window shows _______________ rundll Error loading srclient.dll. The specified module could not be found. _______________________________________________________ Among these annoying messages and some strange effects like games are not installed I cannot use FileZilla to download files from my Internet provider's server. Finally I should go back to my old partition image. I WANT TO HAVE RAYAN UPDATES AND DRIVER PACKS, what I should do?

Rapidshare works! At the bottom choose - free, another page opens then wait or click to download.

Neither for me. The same problem

I do so: In WPI/WPISCRIPTS I go to file lang.js and edit my language (in template). I think for dannish you should write lang = 'dk', it's your choice what language code write in ' '. Save. Then I come to file useroptions.js and edit it, if dannish language code dk: var language='dk'; (or fill your chosen)

AS it is shown, the wpi.cmd has this full path on CDROM: X:\$OEM$\WPI\wpi.cmd and when reaches systemdrive: C:\WPI\wpi.cmd So Windows cannot find wpi.cmd, as WPI folder is not within INSTALL folder. Tengo razon?

It is RGB code - red green blue Intensity of each colour is from 0 to 256, you cannot write 256 in two digits, for that is used hex sistem 0, 1, 2, 3, 4 ... 9, A, B, C, D, E, F (16 digits and characters to substitute digit). To get black colour - you bring RED 00; Green 00; Blue 00 (000000) To get white colour - RED FF; Green FF; Blue FF (FFFFFF) Any achromatic colour - all colours in equal proportions, for exemple: 111111 - it's quit black You will find this in any picture editor.

@ IceBlackIce No hay winntu.dll; winntu.dl_ Tiene editar WINNT32U.DLL o SYSSETUP.DLL Busque "Installing Network" o otras y cambia en el idioma que prefiere. Si qierre ningunas palabras, puede editar en esta manera " ". Yo no se otro "file" para editar. There are no winnt.dll; winntu.dl_ You should edit WINNT32U.DLL or SYSSETUP.DLL Search for "Installing Network" or other and change to the language you prefier. If you want without words, you can edit in this manner " ". I don't know other file to edit. Do not forget apply M O D I F Y P E !!!

All was OK, except hexedit - hexediting was not allowed, but for me it is no need to edit. I have all versions setupdlr.bin pointing to according bootfolder (pro1; pro2; pro3).

@ websee Thanks! DetachedProgram="%systemdrive%\install\slideshow.cmd" It's like to launch WPI; the difference - WPI comes in first reboot after Windows installation.

@ websee start slideshow.cmd form DetachedProgram in winnt.sif. Should I write section in winnt.sif: [DetachedProgram] ???