Petr

Unfortunately no success: Installed from flash disk from windows environment, the flash disk itself is not bootable on this machine (invalid partition table).

I have several computers with Intel 82574L NIC, both on-board and Intel PRO/1000 CT Desktop Adapter. Wake-On-LAN worked fine on Windows 7. Now I upgraded to Windows 10 and WOL is no longer working. Then I found https://kb.stonegroup.co.uk/index.php?View=entry&EntryID=87 Does anybody know if it is possible to make the WOL working on these boards?

Surprisingly, Windows Update has installed 1909 version on the old Esprimo Q5010 with Intel® Core™ Duo Processor T2300E (Yonah) processor. The second Q5010 I upgraded to Intel® Core™2 Duo Processor T7400 (Merom) and works fine as well.

Coreinfo for Core Duo T2300E shows: X64 - Supports 64-bit mode ... CX16 - Supports CMPXCHG16B instruction ... PREFETCHW - Supports PREFETCHW instruction and Windows 10 up to build 1809 work fine. Between Core Duo (Yonah) and Core 2 Duo (Merom) are the following differences. According to AIDA64, Merom supports the following instructions while Yonah not: 64-bit instructions Supplemental SSE3 CMPXCHG16B INVPCID Virtual Machine Extensions (VMX; Vanderpool) 36-bit Page Size Extension 64-bit DS Area CPL Qualified Debug Store Microsoft has the following requirement for 64-bit version of Windows 10 and Windows 8.1 only And the difference between Dothan and Yonah is support of: SSE3 MONITOR / MWAIT Digital Thermometer Enhanced Halt State (C1E) Hard to say, what causes no support of Yonah on 1809 build.

It looks like some hardware platforms are no longer supported by new builds of Windows 10. 1. MSI 915GM Speedster-FA4 with Intel® Pentium® M Processor 750 (Dothan) It works with all builds of Windows 10 up to 1709. Update to 1803 or 1809 ends with error, usually popular IRQL_NOT_LESS_OR_EQUAL error. 2. Fujitsu-Siemens Esprimo Q5010 with Intel® Core™ Duo Processor T2300E (Yonah) and 945GM chipset, I have 2 pieces with same behavior It works fine with all builds of Windows 10 up to 1803. Update to 1809 fails, even the boot from the flas ends with blue windows logo and no rotating white circle. Does anybody know what is the reason? Is this valid for all systems with the same configuration or it is just my bad luck? Is there any way how to make build 1809 working on these old pieces of hardware?