Tomcat76 Posted May 26, 2006 Author Share Posted May 26, 2006 (edited) @SQ5FG: I quickly checked them and they should be supported.If no new test version will be released, the only difference between the current test version and the next final will be: added support for IUCTL.CAB in conjunction with RVM Update Pack when WindowsUpdateAgent20.exe is absent.Checked OK:- WinXP SP2 English + RVM Update Pack- WinXP SP2 Dutch + SWFLASH.CABStill to be checked: WinXP SP1 + Win2K USP5 Edited May 26, 2006 by Tomcat76 Link to comment Share on other sites More sharing options...
Kiki Burgh Posted May 26, 2006 Share Posted May 26, 2006 hi SQ5FG!for hotifxes supported by HFSLIP, you may always cross refer with:Windows XP updates and hotfixes (maintained by Tomcat76)http://www.msfn.org/board/index.php?showtopic=62177Windows XP (all) (maintained by the guy)http://www.msfn.org/board/index.php?showtopic=74840 Link to comment Share on other sites More sharing options...
SQ5FG Posted May 27, 2006 Share Posted May 27, 2006 Thank you guys! :-)I am going to do my slipstream and finally reinstall my current faulty system. :-) Link to comment Share on other sites More sharing options...
Camarade_Tux Posted May 27, 2006 Share Posted May 27, 2006 (edited) Q911565 - wmpui.dll is part of WMP8 but not of WMP9 or 10. When you upgrade to WMP9 or 10, WMPUI.DLL is not updated; it isn't even used.I tried latest test release without nlite; wmpui.dll should be updated since I have WMP8 (which I usually remove with nLite).Other updates seem to be alright (though I still have to test two of them I did not have in \HF) edit: @Tomcat, 833989 seems to be needed but you do not list it. It corrects the GDI+ vulnerability.It is really confusing because lots of applications are concerned but I think I finally understood it:-KB833987 updates Windows GDI+ component-KB833989 updates IE6 SP1 GDI+ componentSee this page (in french) http://www.microsoft.com/france/technet/se...e/ms04-028.mspxThe IE6 patch is listed at the middle of the page and contains vgx.dll. Edited May 27, 2006 by Camarade_Tux Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 27, 2006 Author Share Posted May 27, 2006 @Camarade_Tux: HFSLIP didn't process KB911565 because of an old restriction for KB817787. That's corrected now. Quite a coincidence... I was testing XPSP1 the last couple of hours and noticed the same thing... We're nearing in. I still need to do some stress-testing on Win2K, especially with USP5 as there seem to be some problems in that domain. Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 27, 2006 Author Share Posted May 27, 2006 (edited) I updated my XP SP1 hotfix lists (thanks Camarade_Tux). I hope everything is OK now... Edited May 27, 2006 by Tomcat76 Link to comment Share on other sites More sharing options...
Camarade_Tux Posted May 27, 2006 Share Posted May 27, 2006 Ok. Anyway, with latest test version, everything is OK.All updates are present, tested without nLite.HFNetChk reports all WMP updates are present, MDAC update not present (normal since I don't want it), and two files version greater as expected.And just a quick note : these files are post-installed:Q914798.EXEQ840374.EXEQ832483.EXEThanks a lot for this version. Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 27, 2006 Author Share Posted May 27, 2006 Win2K with SP4 and hotfixes went OK except that the MDAC 2.5 SP3 hotfix wasn't processed. That's fixed in 60527b.Still to go: Win2K + USP5...@Camarade_Tux: That's great. Thanks Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 27, 2006 Author Share Posted May 27, 2006 (edited) USP5 is a strange thing. Kramy already told me the other day he got file copy errors in the beginning of Windows setup and I experienced the same a few hours ago. I traced it down to the slipstreaming of the USP5 service pack itself: some binaries (413 to be exact) are not copied into the source. This can only mean two things:- my w2ksp51.exe file is corrupt- the standard MS service pack switches are not supported by USP5I checked the FAQ on the Hotstream forum and noticed that only the /integrate method is listed as a supported slipstreaming method. So I tried that, but the result is the same.I'm now in the process of downloading the latest version... Be back in an hour or so... Edited May 27, 2006 by Tomcat76 Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 27, 2006 Author Share Posted May 27, 2006 I'm gonna ask for support on the Hotstream forum. I download the latest version and the same thing is happening. I even slipstreamed (or attempted to slipstream) USP5 outside of HFSLIP... Link to comment Share on other sites More sharing options...
Kramy Posted May 27, 2006 Share Posted May 27, 2006 Ok, here's the lastest I've got - these screenshots show the discrepancy. The first two are of my flawelessly working HFSLIP mod ver. The second 3 are of the latest test release.Notice the filesize differences...and that even stream.sys is missing from it.Also, a missing file on the first line - not sure what, and haven't checked if my perfectly working ver has that or not.I know that Tomcat rearranged a lot of slipstreaming code, and while poking around today I caught a few errors. Sadly, I didn't notice them when I originally duplicated them, so I had to fix them in my ver as well. Due to the particular order though, they had no effect in my version.It appears that "ELSE" is not a recognizable command unless it's on the same line as an IF. :HFSPACK4ECHO SLIPSTREAMING SERVICE PACK...SET HFSLIPSVPACK=1MD SPEX\i386IF "%VERSION%"=="2000" ( IF EXIST HF\w2ksp5*.exe (CALL :UNPACK_2KUSP) ELSE IF EXIST HF\w2ksp4*.exe (CALL :UNPACK_2KSP4))IF "%VERSION%"=="XP" ( IF EXIST HF\*835935*.exe (CALL :UNPACK_XPSP2) ELSE IF EXIST HF\xpsp1a*.exe (CALL :UNPACK_XPSP1A) ELSE IF EXIST HF\xpsp1*.exe (CALL :UNPACK_XPSP1))IF "%VERSION%"=="2003" ( ECHO SLIPSTREAMING SERVICE PACK 1 INTO WINDOWS 2003. PLEASE BE PATIENT. FOR /F %%I IN ('DIR/B HFSPACK\*889101*.exe') DO START/WAIT HFSPACK\%%I /Q /X:SPEX\)IF EXIST SOURCE\I386\SVCPACK.INF DEL/Q/F SOURCE\I386\SVCPACK.INFSTART/WAIT SPEX\i386\update\update.exe -u -n -o -q -s:"%~dp0SOURCE\"RD/Q/S SPEXECHO FINISHED SLIPSTREAMING THE SERVICE PACK.ECHO.GOTO EOF:UNPACK_2KSP4ECHO SLIPSTREAMING SERVICE PACK 4 INTO WINDOWS 2000. PLEASE BE PATIENT.FOR /F %%I IN ('DIR/B HF\w2ksp4*.exe') DO START/WAIT HF\%%I /Q /X:SPEX\GOTO :EOF:UNPACK_2KUSPECHO SLIPSTREAMING GURGELMEYER USP5 INTO WINDOWS 2000. PLEASE BE PATIENT.FOR /F %%I IN ('DIR/B HF\w2ksp5*.exe') DO START/WAIT HF\%%I /Q /X:SPEX\GOTO :EOF:UNPACK_XPSP1ECHO SLIPSTREAMING SERVICE PACK 1 INTO WINDOWS XP. PLEASE BE PATIENT.FOR /F %%I IN ('DIR/B HF\xpsp1*.exe') DO START/WAIT HF\%%I /Q /X:SPEX\i386\GOTO :EOF:UNPACK_XPSP1AECHO SLIPSTREAMING SERVICE PACK 1A INTO WINDOWS XP. PLEASE BE PATIENT.FOR /F %%I IN ('DIR/B HF\xpsp1a*.exe') DO START/WAIT HF\%%I /Q /X:SPEX\i386\GOTO :EOF:UNPACK_XPSP2ECHO SLIPSTREAMING SERVICE PACK 2 INTO WINDOWS XP. PLEASE BE PATIENT.FOR /F %%I IN ('DIR/B HF\*835935*.exe') DO START/WAIT HF\%%I /Q /X:SPEX\DEL/Q/F SPEX\i386\update\setupapi.dllGOTO :EOFHowever, the above folder sizes were taken after applying the ELSE fix. Now I need to test if my latest ISO will install, which I doubt it will with several hundred missing files. I'll report back on if it works or not. Link to comment Share on other sites More sharing options...
Super-Magician Posted May 28, 2006 Share Posted May 28, 2006 Kramy: I do not believe any ELSE fix was required. In all of the original code for the :HFSPACK4 section (60527c), the ELSE commands were on the same line as the corresponding IF commands.If the problem you are experiencing is indeed an HFSLIP script problem, I guess Tomcat must have gone too crazy with the cleanup . Link to comment Share on other sites More sharing options...
Kramy Posted May 28, 2006 Share Posted May 28, 2006 Ahh, he must have beat me to it then. He sent me multiple versions last night(60527a,60527b ), and I said I'd look into some error messages in the morning. Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 28, 2006 Author Share Posted May 28, 2006 Ahh, he must have beat me to it then. Yep... That problem was fixed in the 27c release.Either way, the one remaining problem (414 missing files) is not an HFSLIP problem. I suggest we continue that discussion in the other thread.I've sent a new final version of HFSLIP to TommyP a couple of hours ago which is based on 60527c but has the USP5 functionality stripped out. I'll let him decide what we're gonna do... Link to comment Share on other sites More sharing options...
Kramy Posted May 28, 2006 Share Posted May 28, 2006 I don't understand how it can't be an HFSLIP problem, since I have a totally fine older version of HFSLIP that outputs a working slipstreamed & nLitable SOURCESS every time. Well, assuming I move the exe back to HFSPACK before running it, that is. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now