Anbima Posted May 22, 2023 Share Posted May 22, 2023 1 hour ago, NotHereToPlayGames said: No way to disable it. It can be reduced by not running a rebased version of chrome.dll, but then you won't like the RAM consumption. Can you send me the "not rebased" chrome.dll from the 2036? Link to comment Share on other sites More sharing options...
NotHereToPlayGames Posted May 22, 2023 Author Share Posted May 22, 2023 I doubt I even have it anymore. I'd have to recreate it from scratch. Link to comment Share on other sites More sharing options...
Anbima Posted May 22, 2023 Share Posted May 22, 2023 24 minutes ago, NotHereToPlayGames said: I doubt I even have it anymore. I'd have to recreate it from scratch. Can you please look? I think that for many, faster access is more important than a bit more memory. On 1030 I also use the non-rebased and all the errors I had with other programs are gone. Link to comment Share on other sites More sharing options...
Dave-H Posted May 22, 2023 Share Posted May 22, 2023 1 hour ago, NotHereToPlayGames said: Run in Incognito. I suspect your uBO (which always sounds to me like something somebody would say walking out of the gym) is interfering. LOL! Yes, that was it. Not the gretest result. 1 Link to comment Share on other sites More sharing options...
NotHereToPlayGames Posted May 22, 2023 Author Share Posted May 22, 2023 The results are always good for per-computer comparisons (different browsers on the SAME COMPUTER). But the results have never been good for computer-to-computer (my computer versus your computer). Speedometer is great (IMO) for desktop/laptop comparisons but essentially worthless (I am told) as a mobile phone benchmark. Link to comment Share on other sites More sharing options...
Dave-H Posted May 22, 2023 Share Posted May 22, 2023 OK, understood. I'm actually very happy with the apparent speed of this version of 360Chrome. 2 Link to comment Share on other sites More sharing options...
Anbima Posted May 22, 2023 Share Posted May 22, 2023 5 hours ago, NotHereToPlayGames said: I doubt I even have it anymore. I'd have to recreate it from scratch. I have now used the (non-rebased) chrome.dll from 1030 in 2036 for testing. It runs, but it also has the delay. Link to comment Share on other sites More sharing options...
NotHereToPlayGames Posted May 22, 2023 Author Share Posted May 22, 2023 I've always had that delay. I wouldn't swap .dll's between 1030 and 2036, the index numbers for several translation strings do not match. If you navigate through the settings, you may see text in spots they never used to be at. Did you check for that delay with and without the site isolation flag disabled? Link to comment Share on other sites More sharing options...
NotHereToPlayGames Posted May 22, 2023 Author Share Posted May 22, 2023 On 5/17/2023 at 9:07 AM, rereser said: JS polyfill for findLastIndex test : https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/Array/findLastIndex implemented in chrome 97 : https://caniuse.com/mdn-javascript_builtins_array_findlastindex // ==UserScript== // @name Inject findLastIndex Polyfill // @version 0.0.1 // @match *://*/* // @run-at document-start // @grant none // ==/UserScript== if (!Array.prototype.findLastIndex) { Object.defineProperty(Array.prototype, "findLastIndex", { value: function (predicate, thisArg) { let idx = this.length - 1; while (idx >= 0) { const value = this[idx]; if (predicate.call(thisArg, value, idx, this)) { return idx; } idx--; } return -1; } , writable: true, enumerable: false, configurable: true }); } This version breaks USPS login. Previous version breaks MS Teams login. Link to comment Share on other sites More sharing options...
NotHereToPlayGames Posted May 22, 2023 Author Share Posted May 22, 2023 (edited) I think I'm going to start tackling these this way -- https://github.com/barbushin/javascript-errors-notifier/releases I was hoping to just keep ALL of my polyfill usercripts enabled ALL THE TIME but I suspect that's just gonna cause of lot of web sites to break. By using this extension instead, I won't have to open my console every time a web site requries a polyfill, I just need to pull down the icon because it turned red to indicate the page has javascript errors then enable the appropriate polyfill and reload. Edited May 22, 2023 by NotHereToPlayGames Link to comment Share on other sites More sharing options...
rereser Posted May 23, 2023 Share Posted May 23, 2023 source : https://github.com/behnammodi/polyfill/blob/master/array.polyfill.js at the top there is 'use strict'; i left that out on copy because it was not present in the structuredClone polyfill. "use strict"; is also present in the palefill xpi polyfill.js. could that be the cause of the USPS login break ? can't test , have no account , but the login page displays fine. Link to comment Share on other sites More sharing options...
Anbima Posted May 23, 2023 Share Posted May 23, 2023 12 hours ago, NotHereToPlayGames said: I've always had that delay. I wouldn't swap .dll's between 1030 and 2036, the index numbers for several translation strings do not match. If you navigate through the settings, you may see text in spots they never used to be at. Did you check for that delay with and without the site isolation flag disabled? With 1030 I have no delay at all. Click and the page is there. In 1030 I now have isolation flag enable and there is no delay. Link to comment Share on other sites More sharing options...
NotHereToPlayGames Posted May 23, 2023 Author Share Posted May 23, 2023 42 minutes ago, rereser said: source : https://github.com/behnammodi/polyfill/blob/master/array.polyfill.js at the top there is 'use strict'; i left that out on copy because it was not present in the structuredClone polyfill. "use strict"; is also present in the palefill xpi polyfill.js. could that be the cause of the USPS login break ? can't test , have no account , but the login page displays fine. Hmmm... Tested with and without 'use strict'; and doesn't seem to make a difference so I'm unsure if that should be kept or not. But did discover that the login breaks with or without my polyfills enabled, so I guess that's reassuring that it isn't the polyfills causing the break but it's just the USPS web site. I think I'll label the USPS as a False Alarm. Link to comment Share on other sites More sharing options...
rereser Posted May 23, 2023 Share Posted May 23, 2023 (edited) thanks for the feedback. have no other way to test the findLastIndex polyfill except for the mozilla page. also have zero javascript knowledge , i just find , test and post. the previous findLastIndex polyfill i found somewhere else but the test returned a wrong value that i did not notice. still curious about what 'use strict'; does and if it is needed at the top of each script. hope you find the cause of the USPS login break. Edited May 23, 2023 by rereser Link to comment Share on other sites More sharing options...
NotHereToPlayGames Posted May 23, 2023 Author Share Posted May 23, 2023 1 hour ago, rereser said: can't test , have no account , but the login page displays fine. It's one of my favorite accounts. I log in every 30 days to create a Mail Hold - every 30 datys! I literally only walk out to the mailbox and retrieve mail TWELVE times per YEAR. I get ZERO "junk mail" because flyers and advertisements and all sorts of JUNK are not "held" by the Post Office to deliver on my Mail Hold end-date. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now