Dietmar Posted February 3, 2023 Share Posted February 3, 2023 (edited) @casdanic Yepp, hal.dll works, I test with timer, but intelppm.sys not. I install W2k3 bit32 R2, USA version. acpi.sys works. It shows more than 75 Watt doing nothing on the Asrock Extreme z690 board. With the intelppm.sys modded from XP SP3 , this goes down to 25 Watt, but it is still much bigger than it should be. This means, that to change the 2 offsets to C1 states in intelppm.sys is not enough. And also, that the powermanagment in W2k3 bit32 is other than in XP SP3. I get everything to work, I have GT 730 graphikcard, no conflict with any device. USB3 I do not get to work, only xhci, HUB3 not. I tried @daniel_k USB3 AMD 145 driver, the first USB3 driver from @Mov AX, 0xDEAD and the very last USB3 driver from Ramsey, which gives DEADBEEF Bsod, I think because incompatible ntoskrnl.exe from w2k3 bit32 Dietmar Edited February 3, 2023 by Dietmar Link to comment Share on other sites More sharing options...
Dietmar Posted February 3, 2023 Share Posted February 3, 2023 (edited) @casdanic Now I get everything to work for w2k3 bit32 on the Asrock z690 Extreme with 12900k cpu. No conflict in Device Manager. USB3 via @daniel_k mod for w2k3 of its *.inf Dietmar https://ufile.io/isho2boc Edited February 3, 2023 by Dietmar Link to comment Share on other sites More sharing options...
windows2 Posted February 3, 2023 Share Posted February 3, 2023 (edited) On 2/2/2023 at 10:00 PM, casdanic said: @Mov AX, 0xDEAD вторая картинка ошибка Код 10 третья картинка ошибка Код 42 second picture is code 10 error third picture is code 42 error This problem is most likely caused maybe by a malfunction in PCI express socket , try to change the socket VGA card . It happened to me with Win2000 when I installed Nvidia GT 610 ,, , the problem was in the socket VGA, and not in the system, I changed the motherboard because i don't have other VGA socket in this motherboard, and then no conflict in PCI to PCI bridge occurred and Nvidia Gt 610 worked correctly . Edited February 3, 2023 by windows2 Link to comment Share on other sites More sharing options...
casdanic Posted February 3, 2023 Share Posted February 3, 2023 @Dietmar tell me I'm going to buy a motherboard for this build that will stay there forever. I have this variant GIGABYTE H470M K . how is he to you? Link to comment Share on other sites More sharing options...
casdanic Posted February 3, 2023 Share Posted February 3, 2023 @windows2Unfortunately, my board only has one slot, and there is no option to try another one. maybe the graphics card itself is faulty, I'll check that later Link to comment Share on other sites More sharing options...
Dietmar Posted February 3, 2023 Share Posted February 3, 2023 (edited) @casdanic I would not buy another motherboard. I am quite sure, that your problem can be solved, may be just when you set up a brandnew w2k3 bit32 install Dietmar Edited February 3, 2023 by Dietmar Link to comment Share on other sites More sharing options...
Dietmar Posted February 3, 2023 Share Posted February 3, 2023 @casdanic My experience with Gigabyte motherboards is: When they introduce a new board, its Bios is faulty as much as possible. But with time, when some newer Bios versions are out for the same board, it becomes really nice. So, when you are not afraid of flashing Bios, you can make a try also, if there is a newer Bios for your board. But in past I kill a board from Asus, just with updating its original Bios to a newer version. For me, this story with much better Bios now is true for the Gigabyte z690 UD DDR4, which at the beginning even dont recognice any CD-Rom, no working Serial Port etc. Now it is really good and I make all Debug via its Serial Port of XP SP2 bit64 Dietmar Link to comment Share on other sites More sharing options...
casdanic Posted February 3, 2023 Share Posted February 3, 2023 @Dietmarok, i will buy the same board for the project. the last question, does it make sense to install windows on nvme, and will it boot from there at all? Link to comment Share on other sites More sharing options...
Dietmar Posted February 3, 2023 Share Posted February 3, 2023 @casdanic Yes, it boots from nvme but it is less stable compared with boot from HD. I dont know, why this happen, because we have already a lot of nvme drivers. Only the Microsoft nvme driver is stable. But for me, after few days of correct working, suddently Bsod appears. So, for any industrial production, to boot from nvme is not a good idea. But instead of this I noticed, that boot from Ram is very stable, no crash at all. I use for this the modified grub4dos from Kai Schtrom for to load XP to ram and this is ultrafast and rockstable Dietmar Link to comment Share on other sites More sharing options...
casdanic Posted February 3, 2023 Share Posted February 3, 2023 @DietmarCan I install microsoft nvme driver without Kernel-Mode Driver Framework? when I installed it, windows stopped loading, showing bsod deadbeef Link to comment Share on other sites More sharing options...
Dietmar Posted February 3, 2023 Share Posted February 3, 2023 @casdanic This Microsoft nvme driver from @daniel_k works without additional driver. But I never tested it for w2k3 bit32. So maybe, there can be a conflict with the used storport.sys Dietmar https://ufile.io/dusx00yq Link to comment Share on other sites More sharing options...
casdanic Posted February 3, 2023 Share Posted February 3, 2023 @Dietmarand the last question. smart does not work with your driver for the ahci controller. does it risk anything? speed is good. Link to comment Share on other sites More sharing options...
Dietmar Posted February 4, 2023 Share Posted February 4, 2023 (edited) @casdanic When "smart" tells you, that something is not ok with your harddisk, this means, that your harddisk is dead already. I just check the Microsoft nvme from @daniel_k. It works with w2k3 bit32, when you use only the storport.sys (modded from win7) which is in the package for stornvme, also for Kai Sata Dietmar Edited February 4, 2023 by Dietmar Link to comment Share on other sites More sharing options...
casdanic Posted February 4, 2023 Share Posted February 4, 2023 @Dietmar ok, I get it. The only problem is that the smart does not show anything) an empty window, nothing more. with the driver from intel showed. I will try nvme driver. I think it will work. Link to comment Share on other sites More sharing options...
Dietmar Posted February 4, 2023 Share Posted February 4, 2023 (edited) @casdanic I just boot this w2k3 bit32 from Samsung nvme 970 Pro, with the nice nvme driver from @daniel_k Dietmar Edited February 4, 2023 by Dietmar Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now