Vista bluescreens randomly and often on 2700X

[burd]

Just now, asdf2345 said:

Those are only for Intel based systems

Aah , my bad then

[asdf2345]

7 minutes ago, burd said:

Aah , my bad then

I'll try moving over the Windows 7 AHCI driver files, just in case

[burd]

2 minutes ago, asdf2345 said:

I'll try moving over the Windows 7 AHCI driver files, just in case

you might also want to try and install any chipset drivers(if possible) , just in case

[asdf2345]

18 hours ago, burd said:

you might also want to try and install any chipset drivers(if possible) , just in case

I doubt it’s the AHCI drivers anymore, twice, I’ve had the same issues with AMD AHCI drivers

[asdf2345]

I have more minidumps

These are from the first install with the AMD SATA drivers

https://awau.moe/9FqWhxh.7z

This minidump is from the second install with AMD SATA drivers, where I used a different drive, more than halved my memory, and tried to rule out a bunch of things

https://awau.moe/6qnG16x.7z

I have a full memory dump from the second install, but it's taking a while to upload, so once it's done, I'll make another post

[asdf2345]

Full memory dump

https://awau.moe/4SKaB9A.7z

I thought I copied one other to one of my drives, but I couldn't find it, even after chkdsk, so I don't know what happened to the other memory dump

[sunryze]

As far as I know Vista is really a hit or miss with newer processors like this. I don't really have any ideas. iirc you need some dll mods and modded drivers, plus bootsigning off. Your mileage may vary.

[asdf2345]

I got more minidumps, this time from an install updated to Feb 2019

https://awau.moe/YaPhEJ8.7z

[burd]

6 hours ago, asdf2345 said:

I got more minidumps, this time from an install updated to Feb 2019

https://awau.moe/YaPhEJ8.7z

the mountmgr.sys errors have gone after updating , so thats gone , but ntoskrnl.exe still creates issues and now i noticed that fltmgr.sys is again creating an issue

[asdf2345]

1 minute ago, burd said:

the mountmgr.sys errors have gone after updating , so thats gone , but ntoskrnl.exe still creates issues and now i noticed that fltmgr.sys is again creating an issue

Which batch of dmp files specifically have the mountmgr.sys error?

[burd]

9 minutes ago, asdf2345 said:

Which batch of dmp files specifically have the mountmgr.sys error?

the ones before the updated Feb 2019 dmp , they all had it , but in those fltmgr.sys was fine 

Edited July 26, 2020 by burd

[asdf2345]

Just now, burd said:

the ones before the updated Feb 2019 dmp , they all had it

I wonder what update fixed it then

[asdf2345]

More .dmp files, from an install that should be fully up to date

https://awau.moe/2hRND8P.7z

[Tripredacus]

-07 hit a breakpoint. Are you using beta or custom drivers?

[asdf2345]

6 hours ago, Tripredacus said:

-07 hit a breakpoint. Are you using beta or custom drivers?

I'm using custom XHCI drivers, but the crashes happen without any non-included drivers