muiz

Not realy new ,i use this for years.

Exept the lan drivers, still lots of troubles here.

PCI\VEN_1106&DEV_3149&SUBSYS_A1491297&REV_80\3&61AAA01&0&78 : VIA Serial ATA RAID Controller sounds familiar lets hope the new via driver will fix this

it can be integrated with packs like ryanvm's, but also installed KB890830.exe /Q

* Runs only one command per install (Multiple commands can be used in batch files, which are minimised upon opening, so the end user will not see commands being performed). * Easily edited script file with two lines for each install. Hmmm most programs need more then one , and have more lines then 2. Any change this wil be possible in a later version?

DriverPack Graphics B V6.02 , no more VMWARE support? Since this version the vmware graphics driver doesnt work anymore.

Ok , i found out that : Via doesnt use viasraid anymore in its latest drivers. And that the via drivers in the pack are very old ( sorry bashrat ) So what i did was removed the old VIA drivers and replaced by the latest 5.20c. But when i tried to install XP it says : cant find viasraid.sys. Well thats strange cause i removed that one. i opened : slipstream_DPM.cmd , and saw this : REM VIA %T1% "viamraid%T2% %T1% "viasraid%T2% %T1% "viapdsk%T2% it still says viasraid.sys and : REM [WORK-AROUND] VIA VT8237 controller on ABIT KV-80 %T1% "PCI\VEN_1106&DEV_3149&SUBSYS_1419147B&REV_80 = \"viasraid\" and the list goes on can i remove these lines? Altleast thats what im going to try....

Looks the same as se7enalive's work http://www.deviantart.com/deviation/26737317 Even the names are the same.... looks like this aint your work

Quicktime Alternative 1.68 final Switchless installer : Quicktime alternative 1.68 final Changes in 1.68: Updated QuickTime components to version 7.0.4.80 Improved .mov downloader Removed some unneeded components Minor changes

http://www.download.windowsupdate.com/msdo...ol/12091626.cab direct link 1.0.0.56

Admin or just open with winrar? Cant you just upload it somewhere?

use VMWare

http://www.msfn.org/board/index.php?showtopic=63731 ,maybe here is more info

Can you post a screenshot?

any news on this?

@elajua , check your pm

and the latest ide driver for 3112 = 1.3.63.1 it the same as the 3512 driver.

I tried logitech cams myself , but still have no luck to get them to work

Not if run from svcpack

Ask in the wpi forum , i dont use that crap. sorry no offence.

the only thing i found was two switchless installers, but im trying to do it myself. no ofense mruiz but i have seen many post of different topics you saying this: "This was already solved " i think comments like this makes the topics hard to read as many have several like this kind of posts. just a suggestion, no ofense. if someone has the chance to customize the installer so it wont install the scsi service (wich i already did but havent tried on a clean install) please post. i want to know if this solves the new hardware wizard. thanks. Even not installing the scsi service is already solved , you problem i s that you CANT read. Learn to search!!

Why some programs have more then one " ; " ?

Run the silent installer ( elsewhere on the forum ) from svcpack , same goes for daemontools.

Read again : RUN FROM SVCPACK !

This was already solved