dirtwarrior

Is there a tool for repacking groups of icons?

Is there a tool available whice will do the same as modifype with gui instead of commandline? How about a tool for repacking icons?

You have a few options in bios for this , I was looking for O/C bios and couldnt find any But can O/C this board

It is several files. Setupreg.hiv is 1 of them. I dont remember the rest.

Why not get DSL? It would be cheaper than 2 phone lines.

gdogg nice setup

ECS K7S5A It has support for both 168 and 184 pin ram It had 1024 mb PC 133 ram in it now

What are your thoughts on these http://www.newegg.com/Product/Product.asp?...N82E16820231047

I have Speed Fan installed on my computer here are the current read out CPU 100 PSI 33.3 SDRAM 133.3 This brings estimated speed to 1194 MHz I have 1024 meg SDRAM 168 pin ram installed (this is what I had from prevous computer) 1900 AMD processor. From the spec above what should I change? What kind of speed increase would I get. I am not brave enough to try flashing to the O/C bios yet. My board supports 2100 DDR ram would ram rated higher work? Any benifits? I ask this because if this board dies maybe I will get a board that can use this type of ram.

Thank you since the icon from vista wont work are there some that are made for 2k that would? What size and what bit icons does 2k use?

I am working on windows 2000. I want to put vista icons into the shell or explorer or both. Use xp start bar. Thanks I would like to upgrade the windows installer also

LOL Welcome and merry christmas

The floppies that work in girlfriends puter wont work in mine. I changed cables and drives. I was thinking maybe I removed a file I need for floppy support but dont know which 1

I have a panasonic dvdr which has given me no trouble. Its dual layer dual format very nice

I have heard this is the best type of firewall, but I dont know what it is exactly. Is there a such thing as hardware antivirus

Thanks a64 wont install on my 1900. I am going to try the other 1.

I have a floppy and data is not detected. I put another drive in. Changed cables. But everytime I put a floppy in it says please insert floppy. The drive is detected in bios. I dont use a floppy much but there are times when needed badly. Has anyone else experienced this? How did you fix it? Thanks

Has anyone used any good overclocking software?

Since my board isnt easily overclocked are there programs which makes it easy to do it? OK here I found something here http://www.ocworkbench.com/2002/ecs/k7s5abios/cheepobios.htm for O/C bios. I have never upgraded bios before,I am a little nervous doing it. Any pointers? What if I have to revert back to the bios I had?

OK I went into BIOS it seems like those are kind of greyed out and it wont let me change those. Is there a way to trick it into letting me change those values?

I have an ECS board with a 1900+ processor. The board is 266 FSB. The test speed is 1196 processor speed. I want to safely and easily squeeze out a little more speed out of it, anybody willing to help?

Good news for me. I reset the jumpers for the bios and all is ok hmmm mostly. My processor is a 1900+ but when I do a speed test it is rated at 1196 mhz. My mobo is an ECS. This is not a recent problem. How can I speed things up a bit?

OK If my mainboard is shot and I want to get the best bang for my buck and want to replace board and processor(amd) any suggestions. I am poor so my budget is limited.

This morning I checked my email and forums. I rebooted the computer and nothing happened, no bios beep nothing. I didnt have time to check it out until I got off work. Here is a list of things I have tried turning on the computer between each step. removed the ram removed the video card tried another psu The lights come on like it supposed to. I tried pressing insert,all the F keys,del while booting up. Am I missing something? What should I try next?

I tried the cablenut program Cool 6092 kbs d/l connection 761 d/l rate--358kbs u/l 44.8 u/l rate Increase of about 10% Nice