Jump to content

phkninja

Member
  • Posts

    465
  • Joined

  • Last visited

  • Donations

    0.00 USD 
  • Country

    Ireland

Everything posted by phkninja

  1. Andromeda- Although they are working without input now, using the very law you quote on conservation of energy, there had to be an original input of energy to cause the pendulum to swing. if you hang a pendulum it will stop dead on its axis, an external force must cause them to rotate before they can gain enogh energy to keep themselves going.
  2. or click start->switch user. on the welcome screen if administrator is not listed hold ALT+CTRL+DEL and a login box will appear
  3. open the document in notepad and paste the first few lines in here so we can diagnose. It could be the attachment is being sent wrong, it could be the extention is renamed... There are lots of reasons why this can happen. It can also happen when you use certain webmail facilities, they exclud ethe extention so when you save it it saves as an corrupt file.
  4. as gek says, this cannot be discussed. Even if you own the game what you request is outside the EULA, and also "no-cd crack" is illegal even if you own the game (it too is ouside the EULA, no-cd cracks circumvent the copy protection)
  5. one flaw inthe above is the circular magnets at the top of the device. If set up correctly the magnets should act like in the diagram and only go one way, but in reality they will go both directions, clockwise at one time and counter-clockwise another because they will react with the magnets on the spinning disk and force themselves to spin. Another problem is that you must firstly cause the enter disk to spin by pushing it, otherwise the magbets will allreact aainst each other and keep the device stationary. All forces cause in the magnetic fields will cause the top magnets to move and the disk to move. But because their is no direction forced at the beginning (unless acted upon from an external source) half the magnets will move one way, half the other and will cancel all circular momentum.) If im wrong in this them tell me, but as far as im aware this is the case. The problem seen so far with all designs of "perpetual motion machines" has been, the energy put in to startthe reaction usually is greater than the energy given out. In this case the magnets must exert a fource greater than the frictional forces on the wheel to allow it to turn, then you must ensure the top magnets can only revolve inone direction (which still wont stop the magnets from revolving asyncronously and stopping the turning motion)
  6. Parted Magic Linux Boot Cd with partiting tools It is extremely good, haveing Gparted (a GUI partitioning tool)
  7. Chipset: Intel ICH8 2 port SATA - 2825 Chipset: Intel ICH8 4 port SATA - 2820 Both on my motherboard of machine in signature Burner: Plextor PX-760SA Rest of info is in my signature. Sorry this is for IDE Mode, not sure of AHCI yet
  8. Th difference is FOR %%a IN (echo %DISCARD%) echo is a print command, so basically you are asking it to break down something being printed (how do you break down a command???) e.g. for <every part> of (print <variable>) is what you instructed it to do FOR %%a IN (%DISCARD%) break down the variable it its commpoent parts e.g. for <every part> of (<variable>) is what you instructed it to do
  9. In Ireland Online Dabs Elara Online Komplett (expensive, but has a few things others don't) Online & Physical Shop Max Burns
  10. I have 2 Plaextor PX-760SA drives. I never had a problem with them. Ive installed XP, Vista and Linux using them without issue.
  11. Its kind of like BartPE, but better.
  12. What you are referning to is called Bonding. Although it is probably possible using software on a windows server, most implementations I have found are done on *nix. It may be possible to add a *nix frimware patch to a router to make this possible Info on linux bonding Here Boot image (can run on usb) Router config Here or purchase something like below This Ebay
  13. warcrow- you keep forgetting the \ between the %KEY% and the increment
  14. should be SET KEY=HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx REG ADD %KEY% /V TITLE /D "Mark_Test" /f REG ADD %KEY%\1 /VE /D "Kyocera Mita Install" /f REG ADD %KEY%\1 /V 1 /D "c:\migration\AI_KYOCERA_MITA_INSTALL.exe" /f This would be better though SET KEY=HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx REG ADD %KEY% /V TITLE /D "Mark_Test" /f REG ADD %KEY%\01 /VE /D "Kyocera Mita Install" /f REG ADD %KEY%\01 /V 1 /D "c:\migration\AI_KYOCERA_MITA_INSTALL.exe" /f or SET KEY=HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx REG ADD %KEY% /V TITLE /D "Mark_Test" /f REG ADD %KEY%\a1 /VE /D "Kyocera Mita Install" /f REG ADD %KEY%\a1 /V 1 /D "c:\migration\AI_KYOCERA_MITA_INSTALL.exe" /f
  15. no such thing as partition magic freeware. For windows Swiss Knife Cute Partition Manager Super FDisk other partitioning software that uses boot disks (linux etc) Partition Logic GParted I think that GParted is the only on ehere that offers no-destructive resizing and partition moving like Partition Magic.
  16. That was my next port of call after the space requirement. As mercury said check you are in admin mode before trying to create the image, as you know from Linux if you dont have the right permissions you cant do anything. The same is also true for Vista, MS has made it d**n impossible to do anything without logging into the admin account on vista.
  17. Piorted programs usually are edited versions of the originals. The reasone for the edits are 1) Convert \LF to \LF \CR for windows (\LF = Line Feed, \CR = Carrige return. in c or c++ thats \n and \r) 2) Edit any code specific to the OS, eg network programming, directory handlin etc 3) Change any GUI specific code. Some convert from KDE code to wxWidgets so it can be run on all OSes
  18. Bookie- Did you make sure you have more than 4.5GB on C to store the image on. I usuall get the above message when there is not enough space to creat the image.
  19. no, this is not essential (if you know which drive 8is the one you want to install to). but it might be advisable to disconnect any other hard drives, and slipstream the SATA driver into the install. I have done an install on a SATA system with 3 devices connected, and also installed on machines that had ide and sata with the ide being the one for win and vica versa. The reason i would suggest disconnecting all other hd's is so you dont get confused when installing, and also by only having the required hd connected any problems with the SATA driver integration will be show (it wont show a drive to install to if the driver is not integrated properly)
  20. emmmm should that not be cmdow @ /HID @Echo Off FOR %%i IN (D E F G H I J K L M N O P Q R S T U V W X Y Z) DO IF EXIST %%i:\win51ip.SP2 SET CDROM=%%i: SET PP=%cdrom%\Apps SET KEY=HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx REG ADD %KEY% /V TITLE /D "Installing Programs" /f REG ADD %KEY% /VE /D "Nvidia Video Drivers" /f REG ADD %KEY% /V 1 /D "%PP%\nVidia\setup.exe -s -f2setup.iss" /f REG ADD %KEY%\1 /VE /D "Conexant High Definition Audio Driver" /f REG ADD %KEY%\1 /V 1 /D "%PP%\Audio\setup.exe -s" /f REG ADD %KEY%\2 /VE /D "HDAUDIO Soft Data Fax Modem with SmartCP" /f REG ADD %KEY%\2 /V 1 /D "%PP%\Modem\setup.exe -s" /f REG ADD %KEY%\3 /VE /D "HP Quick Luanch Buttons" /f REG ADD %KEY%\3 /V 1 /D "%PP%\Buttons\setup.exe -s -f2setup.iss" /f REG ADD %KEY%\4 /VE /D "HP 1.3MP Web Cam" /f REG ADD %KEY%\4 /V 1 /D "%PP%\WebCam\setup.exe -s -f2setup.iss" /f REG ADD %KEY%\5 /VE /D "Intel PROWireless Drivers" /f REG ADD %KEY%\5 /V 1 /D "%PP%\Wireless\DPInst32.EXE /S" /f REG ADD %KEY%\6 /VE /D "Intel Chipset" /f REG ADD %KEY%\6 /V 1 /D "%PP%\Intel\setup.exe -s" /f REG ADD %KEY%\7 /VE /D "Ricoh 5in1 Card Reader" /f REG ADD %KEY%\7 /V 1 /D "%PP%\Ricoh\setup.exe -s" /f REG ADD %KEY%\8 /VE /D "Ulead PhotoImpact 8" /f REG ADD %KEY%\8 /V 1 /D "%PP%\Impact\Impact8.exe -s" /f REG ADD %KEY%\10 /VE /D "Diskeeper 8.0 Pro" /f REG ADD %KEY%\10 /V 1 /D "%PP%\Dkeeper\Setup.msi /qn" /f REG ADD %KEY%\11 /VE /D "WinRAR 3.2 Corporate" /f REG ADD %KEY%\11 /V 1 /D "%PP%\Winrar\wrar362ce.exe /s" /f REG ADD %KEY%\12 /VE /D "Symantec Antivirus Corporate.v10.0.2" /f REG ADD %KEY%\12 /V 1 /D "%PP%\Nav\Nav10.1.5.5000.exe" /f REG ADD %KEY%\13 /VE /D "Google Toolbar" /f REG ADD %KEY%\13 /V 1 /D "%PP%\Toolbar\GoogleToolbarInstaller.exe /s /qn" /f REG ADD %KEY%\14 /VE /D "MS Intelipoint 4.12" /f REG ADD %KEY%\14 /V 1 /D "%PP%\Mouse\mouse.exe" /f REG ADD %KEY%\15 /VE /D "Nero 7 Micro 7.5.9.0" /f REG ADD %KEY%\15 /V 1 /D "%PP%\Nero\Nero-Lite-v7.5.9.0.exe" /f REG ADD %KEY%\16 /VE /D "RoboForm Pro V5.0" /f REG ADD %KEY%\16 /V 1 /D "%PP%\Roboform\Setup.exe" /f REG ADD %KEY%\17 /VE /D "Shipping Assistant 3.0" /f REG ADD %KEY%\17 /V 1 /D "%PP%\USPS\USPS.msi /qb" /f REG ADD %KEY%\18 /VE /D "Dot Net 2.0" /f REG ADD %KEY%\18 /V 1 /D "%PP%\Dotnet2\dotnet2.exe" /f REG ADD %KEY%\19 /VE /D "Java" /f REG ADD %KEY%\19 /V 1 /D "%PP%\Java\jre511.exe" /f REG ADD %KEY%\20 /VE /D "Stand Alone Programs" /f REG ADD %KEY%\20 /V 1 /D "%PP%\CuteFtp\CuteFtp.exe" /f REG ADD %KEY%\20 /V 2 /D "%PP%\RegCleaner\RegCleaner.exe" /f REG ADD %KEY%\20 /V 3 /D "%PP%\ShoWarez\ShoWarez.exe" /f REG ADD %KEY%\20 /V 4 /D "%PP%\CdRecord\cdrecord.exe" /f REG ADD %KEY%\20 /V 5 /D "%PP%\Winamp\Winamp.exe" /f REG ADD %KEY%\21 /VE /D "Installing Favorites" /f REG ADD %KEY%\21 /V 1 /D "%PP%\Favs\Favorites.exe" /f REG ADD %KEY%\22 /VE /D "Installing Destop Icons" /f REG ADD %KEY%\22 /V 1 /D "%PP%\Desktop\Desktop.exe" /f REG ADD %KEY%\23 /VE /D "Installing Quick Launch Icons" /f REG ADD %KEY%\23 /V 1 /D "%PP%\Qlaunch\Qlaunch.exe" /f REG ADD %KEY%\24 /VE /D "Start-Up Links" /f REG ADD %KEY%\24 /V 1 /D "%PP%\Startup\startup2.exe" /f REG ADD %KEY%\25 /VE /D "Dream Weaver 8" /f REG ADD %KEY%\25 /V 1 /D "%PP%\DreamW8\Dream.msi /qb- REBOOT=REALLYSUPPRESS" /f REG ADD %KEY%\25 /V 2 /D "%SYSTEMROOT%\REGEDIT.EXE /S %PP%\DreamW8\Dream.reg" /f REG ADD %KEY%\25 /V 3 /D "%PP%\DreamW8\Dream.exe" /f REG ADD %KEY%\26 /VE /D "Importing Registry Tweaks" /f REG ADD %KEY%\26 /V 1 /D "%SYSTEMROOT%\REGEDIT.EXE /S %PP%\Tweaks\Tweaks.reg" /f REG ADD %KEY%\26 /V 2 /D "%SYSTEMROOT%\REGEDIT.EXE /S %PP%\Tweaks\CuteFtp.reg" /f REG ADD %KEY%\26 /V 3 /D "%SYSTEMROOT%\REGEDIT.EXE /S %PP%\Tweaks\speedfan.reg" /f REG ADD %KEY%\26 /V 4 /D "%PP%\Tweaks\ie.exe" /f REG ADD %KEY%\27 /VE /D "TVU Player" /f REG ADD %KEY%\27 /V 1 /D "%PP%\TVUPlayer\Setup.exe /S /D=C:\TVUPlayer" /f REG ADD %KEY%\28 /VE /D "AIDA32 Enterprise System Info 3.93 " /f REG ADD %KEY%\28 /V 1 /D "%PP%\AIDA\AIDA.exe" /f REG ADD %KEY%\30 /VE /D "Office 2003" /f REG ADD %KEY%\30 /V 1 /D "%PP%\Office\setup.exe TRANSFORMS=Unattended.MST /qb-" /f REG ADD %KEY%\31 /VE /D "Acrobat Pro.708" /f REG ADD %KEY%\31 /V 1 /D "%PP%\AcrobatPro.708\AcroPro.msi TRANSFORMS=AcroPro.mst /qb /norestart" /f REG ADD %KEY%\32 /VE /D "WinWall V2.1" /f REG ADD %KEY%\32 /V 1 /D "%PP%\Winwall\winwall_setup.exe /VERYSILENT /SP- /DIR=C:\Winwall /NORESTART" /f EXIT according to the unattaned guide examples, you were missing an all important \ between %KEY% and the number. Without this \ you will get REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx1 REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx2 REG ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx3 etc after the %KEY% is expanded during processing. Also as Arie already said they will run as 1,10,11,12...2,20,21... if you dont put 0 (or another character like a befor the digit)
  21. look for the name of the exe bieng called, then use the taskkill method abovew or edit the msi to stop it calling the exe when finished (would be a post install option in the msi)
  22. Brian- Ok here is how you calculate that 1024 bytes = 1KB 1024 KB = 1 MB 1024 MB = 1GB etc the reason for 1024 is to do with information being stored in binary (in bits). 1024 is 2^10. Therefore 7.5MB = 7.5 * 1024 *1024 = 7864320 bytes This makes your calculation into 7864320 / 60 = 131072 bytes per second, * 8 bits = 1048576 bits per sec, = 1024 Kb/s or 1Mb/s Just so you know some manufacturers of hard drives have been fined in Europe for advertising a hard drives as having more space because they use the wrong conversion e.g. 500GB, they use 1000 bytes = 1Kb etc, so they are actually selling 465GB of space ((500*1000*1000*1000 )/ (1024*1024*1024)) This is also why in Windows when you look at a hard drives space info it will say one figure for bytes and something different for GB, e.g. 4,550,839,296 bytes used (4.23GB used)
  23. Firstly was a typo, it should be lokk here Also when looking to fix a fault like this, graphics can help. Open the cd in Explorer and create a screenshot of the left pane with all the $OEM$ folder expanded (like in the unattended guide above). This will help us see if the folders are named correctly etc
  24. Which Text string are you trying to edit??? What are you looking for in your final Setup.exe??? Most of the time its easier just to make a new Setup.exe using Autorun Studio or some similar program (you could use Flash, or some other method as well to create an EXE that can run other programs)
×
×
  • Create New...