BAH, looks nice few things tho.. it wouldnt matter if you coated the whole card in the arctic silver adhesive, its totally non conductive, once set its a bit like the pvc they make clothing from, i also tested it with a meter just to be sure. i covered the whole of my ram chips with it as i wasnt bothered about it getting over the sides, a tiny bit did on one chip but it matters not anyway. another tip if anyone does this, apply a layer of adhesive to both surfaces. it helps fill out any air gaps and gives a beter "footprint". if you put the glue on one surface and push them together, then take it off the glue doesent cover the contact area properly, or you will notice parts where the glue and opposite surface didnt meet very well, putting it on both sides is much beter. i like how you put the sensor lead onto the graphics card.. i might do that as mines not doing anything right now.