Jump to content

Analada

Member
  • Posts

    152
  • Joined

  • Last visited

  • Donations

    $0.00 

Everything posted by Analada

  1. Don't know if anyone is looking at this, but here's maybe a clue. It's culled from FF3 support group: "I digged through the code of firefox and found out they use gtk_print_job_new for printing, which takes a pdf file as a parameter. But how was that PDF file created from the HTML page is not yet clear to me." source: NG: moxilla.support.firefox (Help required on printing web page in firefox)
  2. Did anyone find a solution to Firefox 3 printing? Just read a long thread but doesn't seem any solution, as yet??
  3. Hope this isn't Off topic, but it seems that the 'cloud' system that lacks 'appeal' (I concur) is going to come whether we like it or not.
  4. Hummm...Still no joy. It just stalls on install (after about 2 seconds).
  5. Cannot Get KernelEx to work with firefox setup 3.5.2. Install just crashes. Tried -- [HKEY_LOCAL_MACHINE\Software\KernelEx\AppSettings\Configs] "*\\setup.exe"="WINXP" -- but that didn't work either. No error messages of any kind. Anyone any ideas?
  6. The problem with 512MiB of Video RAM occurs when there is 1GiB or more of system RAM. It would appear, at least with AGP cards, that the entire video RAM is mapped as a frame buffer into the top 1GiB of address space. This space is also used for the AGP aperture, and the VCache among other functions. Also in this space is the VMM page table - this grows proportional to the amount of system RAM. Obviously the AGP Aperture and VCache must be reduced, but somewhere at or over 1GiB of system RAM, there is no more address space for 512MiB of video RAM... I'm not sure how a PCIe card would compare here since they don't use the AGP Aperture... Thanks for the additional info. BTW I'm using 1GB of RAM, so I guess it must be 'over' to cause the problem you mentioned.
  7. I can also confirm no problem with 512MB of video RAM on win98SE (using GEForce 6200/512MB).
  8. Got some further info on it.... It's unsupported (of course) ... The Bon Echo nightlies continue to be built, and fixes for security issues sometimes get checked into the Bon Echo branch. They're also *undocumented* Daily a new version: http://ftp.mozilla.org/pub/mozilla.org/fir...est-mozilla1.8/ Use at what one's own risk, but then, what's new in that?
  9. Thought i'd give it a try. Seems ok so far on my win98SE system. It's called "Bon Echo" for some reason...The 'What's New' link doesn't give any info though.
  10. Look 'n' Stop Firewall 2.06p3 (29 USD) http://www.wilderssecurity.com/showthread.php?t=233626 http://www.looknstop.com/En/faq.htm Phant0m``s Look 'n' Stop Ruleset v8 Build 003.6 http://www.mntolympus.org/phpBB3/viewtopic...f=24&t=2449 Cheers, Roman The 'Buy Now' link is blocked by an entry in MDGx's excellent hosts file... "Your request for https://www.regsoft.net:443/ could not be fulfilled, because the connection to www.regsoft.net (127.0.0.1) could not be established."
  11. You may care to see the Firefox support group to see if this question has been asked of FF3 independently. mozilla.support.firefox on server: 216.196.97.169 Use freeware Thunderbird or any email/newsgroup software. HTH.
  12. Many thanks for your continuing hard work in keeping us updated MDGx! Much appreciated.
  13. Can only answer from my own experience which is this: 1. USB on motherboard packed up (following a lightning strike!) , so I installed a PCI-USB card. Yes, you should be able to disable USB (motherboard provided USB) in BIOS. 2. Whether new USB will be detected in DOS I don't know, except to say that I use Ghost 2003 (DOS) and it detects mine.
  14. No, sorry, this is not helpful. Worse, it is simply misleading and false. Did you use an old ATA disk? There is no SATA driver for the nVidia nForce3 250 chipset. Due to that information above, I spent a couple of hours downloading and installing drivers. Just to find out there is no such thing. My SATA I disk is still running in compatibility mode. The latest Win98 driver for the nForce3 is the v4.27 Unified Driver: http://www.nvidia.com/object/nforce_udp_win9x_4.27.html (Go here: http://www.nvidia.com/Download/index.aspx?lang=en-us + select Product Type: Legacy + Product Series: nForce 3 Series + Operating System: Windows 98 + Language: <doesn't matter> and you will finally land there). This nForce Win9x driver package contains the below components: Audio driver version 4.42 Audio utility version 4.44 Ethernet driver version 4.33 GART driver version 3.77 (WHQL) Memory controller driver version 3.38 (WHQL) with updated uninstaller files SMBus driver version 4.04 (WHQL) with updated uninstaller files Installer version 4.45 Note that you don't need to install neither the Audio driver and utility nor the Ethernet driver from this package on the ASRock ALiveDual-eSATA2 as this board features the C-Media CM6501 Audio Codec (detected as USB device) and the Realtek RTL8111 PCI-E Gigabit Ethernet NIC which have their own drivers. Grab them here: ftp://ftp.asus.com.tw/pub/ASUS/misc/audio...o_V51224219.zip http://www.realtek.com.tw/downloads/downlo...p;GetDown=false So for the ALiveDual-eSATA2, you will only install the GART (aka AGP), Memory controller, and SMBus driver from this package but no SATA driver. I doublechecked wether other vendors with nForce3 250 mainboards may provide SATA drivers for Windows 98 but had no luck. See driver downloads for ASUS K8N-E Deluxe, GigaByte GA-K8NS, GA-K8NS Pro, GA-K8NSNXP, MSI K8N Neo2-FX, and MSI K8N Neo2 Platinum, to name a few. I don't want to conclude my first post here just complaining. Some of you may find this helpful: I've got a passive Sapphire Radeon 3850 (PCI-E). Obviously, there are no Win98 drivers for newer Radeon cards. But I didn't want to switch back to my old card so I searched for a generic VESA driver and finally found this page: http://bearwindows.boot-land.net/vbe9x.htm Using that driver, I can run Windows 98 with a resolution of 1280 x 1024 at 32-bit colors. The drawing speed of the screen is fair (i.e. not really suited for action games), but who cares? It's surely better than 640 x 480 pixels / standard vga driver. :-) Regards I think you've said it all regarding nForce3 (which I use on Foxconn MB). nforce2 and 3 chipsets have a flaw (lack of driver support) with sata 2 drives. You have to force them to 1.5 or sata 1 mode with jumper to get them to work properly. One person on the foxconn forum told me: "At least I had too and could not install windows with them for the life of me. they worked fine as a hot swap storage drive but creates *very* long boot times (NCQ is not supported on these chipsets)." I use (P)ATA and see no reason to use sata at all. HTH
  15. I answered that question here. If you wish to have a full view of the history behind the version numbers conundrum, and have time for it, do read the whole original LLXX topic. Many thanks! I guess this is/will be one of the most important updates as smaller capacity HDDs seem to be hard to find now, at least in UK.
  16. There's always the MS win98SE CD to fall back on - it contains a lot of drivers for HP printers, including Laserjet. The newer Laserjets which *aren't* on the win98SE CD, *may* be driven quite successfully by an older win98SE Laserjet printer driver since the family is software compatible to a large degree. There's an interesting discussion about this topic here, which includes some more background as to why HP pulled win98Se support. http://forums13.itrc.hp.com/service/forums...hreadId=1173447
  17. Perhaps someone might know... BIOS in question is: Award BIOS v6.00PG. Not been able to find out if it supports >137GB. While I'm on this topic I'm also a bit puzzled about the 137GB fix (software), Esdi_506.pdr, and the version that's installed: File Version 4.10.2230 (product version 4.10.2222). Is that correct for 98SE2ME.
  18. Thanks firstly for the info on this thread. The BIOS is also a crucial issue AFAICT.... Found a free utility that says it will tell you if your BIOS supports 48-bit Logical Block Addressing (LBA). Not tried it yet, though. http://www.48bitlba.com/hdinfodetails.htm Note the free version is for those with a floppy disk drive which I guess covers most of us here.
  19. If anyone wants to have their firewall/win98 system checked out, there's a useful (IMO) resource here: www.grc.com Click to enter, then scroll down to "Hot Spots" and "Shields Up". There's other resources on this site, including free downloads.
  20. I just downloaded the Unofficial IE6 Cumulative Upgrade component only ( (mdie6cu.exe). It installed in windows/system the following dlll> iepeers.dll. Not been able to find out if this is necessary in win98SE, but the version installed 6.00.2800.1616 doesn't seem to be listed here: http://www.programchecker.com/file/31791.aspx Just wondering what it does and do we need it? TIA
  21. Audigy: Over a year ago I emailed the manufacturers (Creative's) support line to find out whether there were drivers for this. The answer was a definite no. I got a SB Live card from ebay cheap and it works great. On a different but related topic, if anyone is using SB Live on XP you can get the Audigy drivers to work with it.
  22. As a great number of threads around, this one has not been finalized: http://www.msfn.org/board/MFC42DLL-Unicode...lem-t35158.html So we do not know if the suggested solution may work or not, however, seen also here: http://support.microsoft.com/kb/259403/en-us that MFC42.DLL and MFC42U.DLL have the same size, a try worth making is the following: 1) download and install the VCREDIST 2) make a copy of MFC42.DLL, renaming it to MFC42U.DLL 3) try registering it 4) try running the app with your fingers crossed... At worst you will have latest VC components updated and the desired app still not working...., since your mileage may vary, make sure to have backed up the system correctly before attempting the above. jaclaz P.S.: and please report back (hopefully ) success or (unfortunately ) defeat, so other people may find this thread and either use the solution or avoid the hassle Did all above. No joy i'm afraid. "Error Starting Program. The videoconvertor.exe file is linked to missing export MFC42U.dll: 1560". Click and then second error message: "A device attached to the system is not functioning".
  23. Already tried that. Didn't work. From google search I think that the dll might need some other updated stuff not available in win98. At any rate I've not found a solution and it seems that this question has been asked many times...
  24. Went and installed Any Video Converter program (avc-free.exe). It installed ok but won't run, complains of missing dll "mfc42U.dll". Evidently mfc42u.dll first made its appearance on winNT. Is there any way of solving this? I tried dloading the dll and doing Regsvr32 on it, but that doesn't work.


×
×
  • Create New...