MarkJohnson Posted February 21, 2019 Share Posted February 21, 2019 I am fixing a friends computer. It needs a new SSD. It won't be here until Saturday. She wants it working today! My spare PC has a M.2 nvme SSD I can use. Whats the best way to backup and then restore this. I have a 1TB backup drive on my spare PC. Is there a simple way to backup with Windows built-in software? How would I restore it? My system wouldn't have windows installed on the new SSD. This seems complicated. Link to comment Share on other sites More sharing options...
Mcinwwl Posted February 21, 2019 Share Posted February 21, 2019 The question we should start from to help you is "What is wrong with this old SSD, she needs to replace?". Link to comment Share on other sites More sharing options...
MarkJohnson Posted February 21, 2019 Author Share Posted February 21, 2019 It's too small, and won't boot windows anymore. I reinstalled Windows and it still won't boot. I even used diskpart and cleaned the drive and it still won't boot. I t will still copy files and stuff to it when I connect it to me pc. It won't even boot on my PC either when I install windows. It's only 120GB sata III. Link to comment Share on other sites More sharing options...
MarkJohnson Posted February 21, 2019 Author Share Posted February 21, 2019 Thanks for the help, but I just used MS image backup ans said a couple prayers. Link to comment Share on other sites More sharing options...
Mcinwwl Posted February 22, 2019 Share Posted February 22, 2019 I hoped for someone more experienced to hop in here... I'm not an expert, but I'd use some tool like dmde or dd to create binary image of the disk mentioned. This is not the most easy-going way, but at lease you are sure that whatever bad happens, you have exact copy of the state from before your modifications. On 2/21/2019 at 7:32 PM, MarkJohnson said: It's too small, and won't boot windows anymore. I reinstalled Windows and it still won't boot. And that makes me doubt, I remember I used x64 tablet with 64 GB eMMC storage and windows 10 with current updates applied, and it was working. So assuming that you can mount it as a slave drive and browse on other PC, I'd just remove unnecessary files, so it has enough free space to launch and create temp files and page file, and try to boot. If this does not help, it means that failure root cause is not too little space. And no, I cannot say what at the moment. Link to comment Share on other sites More sharing options...
erpdude8 Posted April 2, 2019 Share Posted April 2, 2019 better use either Macrium Reflect free or Easeus Todo Backup free and do a "disk clone" which copies the entire contents (including the MBR and perhaps hidden partitions) from one drive to another doing this with built-in backup apps in Windows isn't quite good enough Link to comment Share on other sites More sharing options...
Tripredacus Posted April 3, 2019 Share Posted April 3, 2019 I had to use one of those (which has a free, which has a trial?, I forget, I think I used the one with the trial version) to do a spindle to SSD clone when Ghost couldn't do it. Ghost is usually decent enough for cloning between PATA/SATA spindle disks, but apparently some SSDs it can't do. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now