July 21, 201412 yr guys,WinFLP installed and is working perfectly the only problem is that after installing MSE can not stop running the "real time protection". I checked on the MSE tab and this feature is enabled by default.The WinFLP is with all updates to date, including applied the trick POSReady to enable automatic updates in 2019 and is working perfectly. The only problem is making me angry is just unable to enable real-time protection of MSE. He usually updates but does not enable real-time protection at all!Algumém can give me any hints about it?
July 22, 201412 yr Author Yes. Here: <link>. dencorso, I had posted this same question there and followed the hint proposal but unfortunately it did not work.
July 22, 201412 yr Yes. Update to MSI 4.5, then try and see whether you can update MSE without errors or not, and post back what happened, OK?
July 22, 201412 yr Author Yes. Update to MSI 4.5, then try and see whether you can update MSE without errors or not, and post back what happened, OK?dencorso,two weeks ago I'm testing the WinFLP and installed the 4.5 version of the MSE. The application downloads all updates antiviruse works normally. But the real-time protection is permanently disabled.In all versions of MSE I tested only 1.0 usually works: download all updates normally and the real-time protection remains active. After a few minutes of use, the application displays a message that needs to be updated to a new version. It downloads the package, I click to accept the license terms and the installation begins so he can upgrade to the new version, however, happens 0x8004FF01 error stating that it could not complete the installation. Version 1.0 works normally but can not update it to a later version.There must be some key in the registry that can enable real-time protection.Follow even the hint of dajhorn which was published here on MSFN: "HOWTO install Microsoft Security Essentials on POSReady 2009," but neither worked.
July 22, 201412 yr Did you miss this? You can't run anything past version 4.4.304.0 on XP.You'll need a version no later than that one and manually get the Definition Updates to install, otherwise it just won't work.Definitions - http://support.microsoft.com/kb/971606v4.4.304 - http://filehippo.com/download_security_essentials_xp MS "broke" the Downloaded one so you -must- use this one -and- turn off -any- Update options in it and -always- manually download and install Definitions! HTH References -http://www.msfn.org/_/software/bug-in-microsoft-security-essentials-downs-windows-xp-machines-r9009http://www.msfn.org/board/topic/171498-need-microsoft-security-essentials-grab-it-now/ Side Note - you DID get that one, right? ONLY UPDATE DEFINITIONS! edit (after dencorso post) - Awww... forgot about needing the latest (v4.5) Installer. ;( edit2 (after dersonpg) - Wow! I guess I'm behind on the posts? Dencorso meant the MICROSOFT INSTALLER v4.5 (MSI = Microsoft Software Installer) -not- Microsoft Security Essentials. You're confusing things. use the MSIv4.5+MSEv4.4.304 and -do not-allow updates. Later than that version will CRASH! (see first reference). Edited July 22, 201412 yr by submix8c
July 23, 201412 yr Author Did you miss this? You can't run anything past version 4.4.304.0 on XP.You'll need a version no later than that one and manually get the Definition Updates to install, otherwise it just won't work.Definitions - http://support.microsoft.com/kb/971606v4.4.304 - http://filehippo.com/download_security_essentials_xp MS "broke" the Downloaded one so you -must- use this one -and- turn off -any- Update options in it and -always- manually download and install Definitions! HTH References -http://www.msfn.org/_/software/bug-in-microsoft-security-essentials-downs-windows-xp-machines-r9009http://www.msfn.org/board/topic/171498-need-microsoft-security-essentials-grab-it-now/ Side Note - you DID get that one, right? ONLY UPDATE DEFINITIONS! edit (after dencorso post) - Awww... forgot about needing the latest (v4.5) Installer. ;( edit2 (after dersonpg) - Wow! I guess I'm behind on the posts? Dencorso meant the MICROSOFT INSTALLER v4.5 (MSI = Microsoft Software Installer) -not- Microsoft Security Essentials. You're confusing things. use the MSIv4.5+MSEv4.4.304 and -do not-allow updates. Later than that version will CRASH! (see first reference). Ok submix8c.I did as you said. I updated Windows Installer to version 4.5 and installed MSE 4.4.304.0 on XP. I downloaded the updates manually and installed. Updates of virus and spyware have been updated but the real-time protection remains disabled. That red shell of the castle appears on the taskbar stating that the MSE is disabled. When I try to enable real-time protection happens the error 0x800705B4. I will not give up. must have some way to enable real-time protection ...
July 23, 201412 yr One reason to get that error on MSE is if you have another antivirus software installed. This includes Windows Defender. If you have Windows Defender also, uninstall it, reboot and try to enable the real time protection. Take a look see here: http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/real-time-protection-will-not-turn-on-getting/02df6379-a30d-49f7-8e7f-cd987ef9ad48
July 23, 201412 yr Guess that should have been mentioned from the beginning. Multiple AntiVirus Real-Time doesn't play well together. In fact in a "regular" XP (or newer) the "flag" in the Registry is -usually- set to indicate you already have an AntiVirus to keep from getting a warning about not having one or it being disabled. You must have another one installed that's "over-riding" that flag? If you absoultely insist on having multiple AntiVirus software, -only enable realtime on one of them- and use the "others" manually. FYI, this has been a known problem for many Antivirus vendors for quite some time now. Worse, -some- vendors actually (sometimes) see -another- vendor's software as malware. Edited July 23, 201412 yr by submix8c
July 24, 201412 yr Author I tried everything to enable real-time protection to no avail... The only version of MSE that works with real-time protection enabled is 1.0. When I try to upgrade to version 2.0, I can not. the 0x8004FF04 error appears. I tried the tip from dajhorn: HOWTO install Microsoft Security Essentials version 4.5 on POSReady 2009 and it works, but the real-time protection is not enabled.
Create an account or sign in to comment