FuNkiTo Posted March 10, 2013 Share Posted March 10, 2013 Hi! I need more room in my hdd so I have decided to buy an external hdd. As I can read, no one specifies about wk2 but only xp, 7 and those new ones. I'm specially interested in this one:http://western-digital.icecat.it/en/p/wdbpck0010bbk-eesn/external-hard-drives-0718037780566-elements-se-9496708.htmlAny idea?? Thanks!! Link to comment Share on other sites More sharing options...
submix8c Posted March 10, 2013 Share Posted March 10, 2013 (edited) ?As long as it's recognized, my impression is that Win2000 and up supports up to 2.2tb. Maybe Win2K isn't mentioned because it's an unsupported OS? Notice that MAC OS doesn't show older either (and unsure IF older would support it).Someone will correct me if I'm wrong on this. Edited March 10, 2013 by submix8c Link to comment Share on other sites More sharing options...
dencorso Posted March 10, 2013 Share Posted March 10, 2013 I confirm it supports Seagate 2 TB Free Agent External USB HDDs. Now, 2 TB is 1.862 GiB... so that much I guarantee it supports OK. USB 3.0 HDDs are no problem either, since they are guaranteed to work in USB 2.1 mode (i. e. "USB 2.0 compatibility mode). I see no reason whatsoever for any of the current 2 TB USB HDDs in the market to have compatibility problems with Win 2k, regardless of their brand. Link to comment Share on other sites More sharing options...
tomasz86 Posted March 10, 2013 Share Posted March 10, 2013 (edited) As long as you've got SP3 or newer installed and a USB 2.0 / 3.0 port (in case of USB 1.1 you may need a special cable and connect it to two ports at once) Edited March 10, 2013 by tomasz86 Link to comment Share on other sites More sharing options...
jaclaz Posted March 10, 2013 Share Posted March 10, 2013 (in case of USB 1.1 you may need a special cable and connect it to two ports at once)These are "news" for me, care to expand on this? Or are you talking of the common Y-cable to allow more than 500 mA to power the disk drive?I am not aware of a change in specs before 3.0 , i.e. the max is 5 units (of 100 mA each) on both USB 1.1 and USB 2.0 and was upgraded to 6 units (150 mA each) in USB 3.0.jaclaz Link to comment Share on other sites More sharing options...
tomasz86 Posted March 10, 2013 Share Posted March 10, 2013 Or are you talking of the common Y-cable to allow more than 500 mA to power the disk drive?I meant a Y-cable like this one: Link to comment Share on other sites More sharing options...
jaclaz Posted March 10, 2013 Share Posted March 10, 2013 (edited) Or are you talking of the common Y-cable to allow more than 500 mA to power the disk drive?I meant a Y-cable like this one:Never seen one of those, you mean something like this one:http://www.amazon.com/Oyen-Digital-Y-Cable-Micro-B-Standard/dp/B0052OJ97OThey seem to be needed for *any* of USB 1.1, 2.0 or 3.0. (in the sense that you still have a female "A" connector on the motherboard, and if it USB 3.0 you don't need the "Y cable", but if it is indifferently a USB 1.1 or 2.0 you may need it) of course if the disk has a USB 3.0 "micro-B" connector.Or am I missing something?jaclaz Edited March 10, 2013 by jaclaz Link to comment Share on other sites More sharing options...
FuNkiTo Posted March 10, 2013 Author Share Posted March 10, 2013 Thanks so much for your replies. I got SP4 installed, and my motherboard supports USB 2.0 ... I'm gonna buy it tomorrow, as my PC is starting to crash doing weird noises and freezing I blame it on the dvd but not sure at all. I'll give you some news! Link to comment Share on other sites More sharing options...
tomasz86 Posted March 11, 2013 Share Posted March 11, 2013 Never seen one of those, you mean something like this one:http://www.amazon.com/Oyen-Digital-Y-Cable-Micro-B-Standard/dp/B0052OJ97OIsn't it same as the one above? Link to comment Share on other sites More sharing options...
jaclaz Posted March 11, 2013 Share Posted March 11, 2013 Isn't it same as the one above?Yes , only instead of linkig to the image aI linked to a page where there is some textual description.Let's try to expand on the matter, I am just trying to understand if there is a misunderstanding.A USB 1.1 connector on a motherboard is (normally) an A-type connector female and can provide by specs up to 5*100=500 mA.A USB 2.0 connector on a motherboard is (normally) an A-type connector female and can provide by specs up to 5*100=500 mA..A USB 3.0 connector on a motherboard is (normally) an A-type connector female and can provide by specs up to 6*150=900 mA.The A-type connector is the same (actually "compatible) for USB 1.1, 2.0 and 3.0.A USB 3.0 connector on a 2.5" hard disk external enclosure may be a (USB 3.0) B-micro type.To connect the enclosure to a motherboard you need a USB 3.0 cable.Normally, i.e. if you have a USB 3.0 motherboard, you need a USB 3.0 cable with a A-type male connector on one end and a B-micro-type on the other.Normally, i.e. if you have a USB 1.1 or 2.0 motherboard, you can use that same cable, as the hard disk won't need more than 500 mA.In some cases where the motherboard provides less current than specs or the enclosure/disk requires more than 500 mA (which are THE SAME for USB 1.1 or 2.0) you need an Y cable, capable of getting some more current from another USB port.So you need a USB 3.0 cable with a doubled power connector A-type besides the standard data/power A-type connector on one end and a B-micro-type on the other.I am saying that there is not AFAIK any particular difference between USB 1.1 and 2.0 (apart data transfer speed that you might get) when connecting a USB 3.0 device, you seemed to say that there is one.jaclaz Link to comment Share on other sites More sharing options...
FuNkiTo Posted March 11, 2013 Author Share Posted March 11, 2013 I have already bought and checked this HDD and it's working really fine. I just plugged and started playing It has a simple usb cable, the only problem I can see it's copying data a bit slow because of my USB2.0 and my old IDE hdd. Link to comment Share on other sites More sharing options...
tomasz86 Posted March 11, 2013 Share Posted March 11, 2013 (edited) I am saying that there is not AFAIK any particular difference between USB 1.1 and 2.0 (apart data transfer speed that you might get) when connecting a USB 3.0 device, you seemed to say that there is one.Well, I said that because I myself had problems with my USB 3.0 external HDD (2.5") which is detected properly on my desktop when it's connected to a USB 2.0 port but is not detected at all when connected to a USB 1.1 port on an older laptop.It just acted as if it wanted to start but couldn't (the LED was blinking). Same thing happens if I try to connect it to my desktop using a USB 2.0 extension cable. It must be connected directly to the USB 2.0 port in order to start properly. In case of that laptop it couldn't start even though it was connected directly to the USB 1.1 port. Edited March 11, 2013 by tomasz86 Link to comment Share on other sites More sharing options...
jaclaz Posted March 11, 2013 Share Posted March 11, 2013 Well, I said that because I myself had problems with my USB 3.0 external HDD (2.5") which is detected properly on my desktop when it's connected to a USB 2.0 port but is not detected at all when connected to a USB 1.1 port on an older laptop.It just acted as if it wanted to start but couldn't (the LED was blinking). Same thing happens if I try to connect it to my desktop using a USB 2.0 extension cable. It must be connected directly to the USB 2.0 port in order to start properly. In case of that laptop it couldn't start even though it was connected directly to the USB 1.1 port.I see , maybe (being an "early" laptop) it provides less than spec current?BUT the issue with an USB 2.0 extension cable is "queer". I mean. an extension cable is "passive" and if you give to it 500 mA at one end, you can surely can get AT LEAST 499.999 mA at the other end , though it is possible that you have a voltage drop, see how in practice:http://www.girr.org/mac_stuff/usb_stuff.htmlIt seems like *everything* or nearly everything is "out of specs", one way or the other.Maybe they are two different causes (the one being the laptop not providing enough "juice", and the other one about the HD somehow *sensing* the extension cable as "not suitable" for data transfer, i.e. not related to current or causing a too high voltage drop). jaclaz Link to comment Share on other sites More sharing options...
Dagorlad Posted March 12, 2013 Share Posted March 12, 2013 The USB spec evolved quite a bit over the years. The latest USB 2 spec allows for as much as 1500mA to be drawn from a port if the port is capable of supplying that much current. The current power spec can be found here. Link to comment Share on other sites More sharing options...
jaclaz Posted March 12, 2013 Share Posted March 12, 2013 The USB spec evolved quite a bit over the years. The latest USB 2 spec allows for as much as 1500mA to be drawn from a port if the port is capable of supplying that much current. The current power spec can be found here.Yes , but here we are talking of the "minimum" you can surely find on a USB port, that is the "old" specs of 5 "units".jaclaz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now