MacLover Posted September 3, 2015 Share Posted September 3, 2015 (edited) I've been trying to get later versions of WinUAE working in Windows 2000 (The last version that officially supports 2000 is 2.0.1.)- 2.4.2 beta 6 and earlier will always run correctly with an extended kernel- 2.4.2 beta 7 through 2.5.0 beta 14 will just quit after attempting to allocate memory- 2.5.0 beta 15 through 2.7.0 beta 9 have the following behavior: - If the system memory is less than 1536MB, the emulator will run - If the memory is 1536MB or more, the emulator will not run (If I run with "-log", the last entry is "Total physical RAM 2047M, all RAM 4160M, attempting to reserve 769M)- 2.7.0 beta 10 and all later versions will stop at the "Attempting to reserve" message even if system memory is <1536MB The problems seem related to a memory allocation rewrite in 2.4.2 beta 7 (and from searching the source tree for the log messages, it seems like the relevant code is in od-win32/mman.cpp EDIT: I was looking at some more of the WinUAE changelogs and it looks like the emulator had to implement a workaround at one point for Win2k's VirtualAlloc not supporting the MEM_WRITE_WATCH flag. This workaround was removed in 2.2.0 beta 1. EDIT: Had the wrong version listed as the last that was officially Win2k compatible. EDIT: I tried running the emulator with API Monitor and it got stuck in a loop trying to use VirtualAlloc() with the MEM_WRITE_WATCH flag. Windows returns 0x50 (ERROR_NOT_SUPPORTED). If I'm reading the output correctly, it looks like the NtAllocateVirtualMemory API in NTDLL.DLL actually does the work and VirtualAlloc() just calls it. NtAllocateVirtualMemory returns 0xc00000bb (STATUS_NOT_SUPPORTED). Edited September 16, 2015 by MacLover Link to comment Share on other sites More sharing options...
DanR20 Posted September 13, 2015 Share Posted September 13, 2015 (edited) blackwingcat, one of your September updates that patches the atmfd.dll font driver is missing the SP3QFE folder containing the atmfd.dll file, is it inside the update.exe in the update folder instead? Thanks to the PosReady 2009 hack I'm still getting all the latest XP updates so I just copied the newest version 5.1.2.246 into Win2000 but if it is in your update then I'll save it in case it's needed.If it's possible could you look into updating AMD legacy drivers to 13.1? That's the most current version for XP that can be downloaded here:http://www.techspot.com/drivers/driver/file/information/16757/ Edited September 14, 2015 by DanR20 Link to comment Share on other sites More sharing options...
blackwingcat Posted September 14, 2015 Author Share Posted September 14, 2015 blackwingcat, one of your September updates that patches the atmfd.dll font driver is missing the SP3QFE folder containing the atmfd.dll file, is it inside the update.exe in the update folder instead? Thanks to the PosReady 2009 hack I'm still getting all the latest XP updates so I just copied the newest version 5.1.2.246 into Win2000 but if it is in your update then I'll save it in case it's needed. If it's possible could you look into updating AMD legacy drivers to 13.1? That's the most current version for XP that can be downloaded here: http://www.techspot.com/drivers/driver/file/information/16757/Sorry I fixed it. I uploaded on 2015/9/14 6:45(GMT) My ATi VGA card had broken. so, I can not test customized driver. Link to comment Share on other sites More sharing options...
DanR20 Posted September 14, 2015 Share Posted September 14, 2015 Sorry I fixed it.I uploaded on 2015/9/14 6:45(GMT) My ATi VGA card had broken. so, I can not test customized driver. Got it, thanks. No problem with the AMD drivers, the 9.12beta still work well enough for now although eventually they'll probably become outdated given the increasing demand of the newer flash versions. Link to comment Share on other sites More sharing options...
JosefReisinger Posted September 14, 2015 Share Posted September 14, 2015 Hi blackwingcat.I installed framework 3.5SP1 from your website in w2k (extended kernel). Installation was done without error. Now, microsoft update wants to apply kb974417 and kb979909. Can I ignore these or should I apply these?I tried to install the german language pack for netfx 3.5, but this refuses to run compat XP mode with fcwin. What can I do to get this done?Greetings, Joe Link to comment Share on other sites More sharing options...
blackwingcat Posted September 14, 2015 Author Share Posted September 14, 2015 (edited) Hi You should ignore them because they are only lastest update for Windows 2000 but more newer updates exists and perhaps applied them.It similars older roots certificate update shows on Windows Update for Windows 2000. You can install german language pack by two ways. 1. use orca and change msi2. a) install it http://blog.livedoor.jp/blackwingcat/archives/1694043.htmlb) reboot your pcc) stop service msisrvd) set msiexec.exe XP compatible modee) install it. Hi blackwingcat.I installed framework 3.5SP1 from your website in w2k (extended kernel). Installation was done without error. Now, microsoft update wants to apply kb974417 and kb979909. Can I ignore these or should I apply these?I tried to install the german language pack for netfx 3.5, but this refuses to run compat XP mode with fcwin. What can I do to get this done?Greetings, Joe Edited September 14, 2015 by blackwingcat Link to comment Share on other sites More sharing options...
blackwingcat Posted September 18, 2015 Author Share Posted September 18, 2015 I succeeded to install iTunes 12.3 on windows 2000 http://blog.livedoor.jp/blackwingcat/archives/1912120.html 1 Link to comment Share on other sites More sharing options...
JosefReisinger Posted October 2, 2015 Share Posted October 2, 2015 @blackwingcat:I tried to install netfx 3.5 language pack deu. I extracted the .exe with 7z. Inside there is a setup.exe and vs_setup.msi. I tried to run msi according to your instructions, message: "run setup!". With fcwin I ran setup.exe in compat mode XP SP3 and installation went on successfully. But at the end, setup message failure and setup rolled back. I had failure:EventType: visualstudio8setup P1:35102P2: 3.5.30729.01.00_orcas_x86_net P3:pr P4:inst P5:fP6: gencomp735 P7: baseret_failure P8:0 P9:1603P10:gencomp700_{12cd And in temp\wlf47.txt:[10/02/15,21:29:26] XPSEPSC Language Pack: ISetupManager::GetGlobalCustomProperty() failed to find global prop in CBaseComponent::GetGlobalCustomProperty()[10/02/15,21:29:26] Setup.exe: GetGlobalCustomProperty - Property: {BBE1827C-F2FD-4FDA-A6D6-C83B62FFFDCA} - PropertyName: compfailed - Value: 0[10/02/15,21:29:26] Setup.exe: GetGlobalCustomProperty - Property: {E0875D42-A33D-4C64-81C9-167795F29CA4} - PropertyName: PathFromCartmanToRoot - Value: .[10/02/15,21:29:26] XPSEPSC Language Pack: GenericComponent Action: CreateProcess launched with cmd line : d:\softwaredownload\windows\w2k\net framework\3.5\dotnetfx35langpack_x86de\.\netfx30lp\XPSEPSCLANGPACK-x86-de-DE-langpack.exe /quiet /norestart /log:"%TEMP%\dd_XPS_LP.txt"[10/02/15,21:29:26] BWaitForMSI(): Verifying we're the only installation currently in progress.[10/02/15,21:29:26] BWaitForMSI(): Ready to proceed with installation. Continuing...[10/02/15,21:29:27] XPSEPSC Language Pack: d:\softwaredownload\windows\w2k\net framework\3.5\dotnetfx35langpack_x86de\.\netfx30lp\XPSEPSCLANGPACK-x86-de-DE-langpack.exe exited with return value 1603[10/02/15,21:29:27] InstallReturnValue: GFN_MID XPSEPSC x86 Language Pack, 0x643[10/02/15,21:29:27] Setup.exe: AddGlobalCustomProperty[10/02/15,21:29:27] XPSEPSC Language Pack: ***ERRORLOG EVENT*** : Error code 1603 for this component means "Schwerwiegender Fehler bei der Installation."[10/02/15,21:29:27] Setup.exe: AddGlobalCustomProperty[10/02/15,21:29:27] XPSEPSC Language Pack: ***ERRORLOG EVENT*** : Setup Failed on component XPSEPSC Language Pack[10/02/15,21:29:27] Setup.exe: GetGlobalCustomProperty - Property: {BBE1827C-F2FD-4FDA-A6D6-C83B62FFFDCA} - PropertyName: compfailed - Value: 0[10/02/15,21:29:27] XPSEPSC Language Pack: CBaseComponent::LaunchWatson() - Obtained CSetupWatson instance[10/02/15,21:29:27] XPSEPSC Language Pack: ISetupManager::GetGlobalCustomProperty() failed to find global prop in CBaseComponent::GetGlobalCustomProperty()[10/02/15,21:29:27] XPSEPSC Language Pack: ISetupManager::GetGlobalCustomProperty() failed to find global prop in CBaseComponent::GetGlobalCustomProperty()[10/02/15,21:29:27] XPSEPSC Language Pack: CBaseComponent::LaunchWatson() - Creating a PreReq Watson report with manifest: C:\DOKUME~1\ADMINI~1\LOKALE~1\Temp\MAN45.tmp temp\sdb48.tmp seems not to contain useful information for this. So it seems to be more tricky to install german language pack. Can you give advice? Greetings, Joe Link to comment Share on other sites More sharing options...
to2000 Posted October 4, 2015 Share Posted October 4, 2015 How about Directx10/11 ? The F1 2012 would work with dx10 dlls what i see, but the wined3d dlls seems to be don't working on Windows 2000 with this kernel, because game is not opening, without wined3d dlls game is only showing a Statement about needing of DX10/11 support. Link to comment Share on other sites More sharing options...
blackwingcat Posted October 5, 2015 Author Share Posted October 5, 2015 Hi. Try to following way. extract package your self.update ( XML Paper Specification Shared Components Language Pack )msiexec.exe /i netfx30lpa_x86.msimsiexec.exe /p NetFX30_CA_DEU.mspmsiexec.exe /p WCF_DEU.mspmsiexec.exe /p WF_DEU.mspmsiexec.exe /p WPF1_DEU.mspmsiexec.exe /p WPF2_DEU.mspmsiexec.exe /p WPF_Other_DEU.mspmsiexec.exe /p XPS_DEU.mspmsiexec.exe /passive /i vs_setup.msi @blackwingcat:I tried to install netfx 3.5 language pack deu. I extracted the .exe with 7z. Inside there is a setup.exe and vs_setup.msi. I tried to run msi according to your instructions, message: "run setup!". With fcwin I ran setup.exe in compat mode XP SP3 and installation went on successfully. But at the end, setup message failure and setup rolled back. I had failure:EventType: visualstudio8setup P1:35102P2: 3.5.30729.01.00_orcas_x86_net P3:pr P4:inst P5:fP6: gencomp735 P7: baseret_failure P8:0 P9:1603P10:gencomp700_{12cd Link to comment Share on other sites More sharing options...
JosefReisinger Posted October 5, 2015 Share Posted October 5, 2015 Hi.I tried msiexec.exe /i netfx30lpa_x86.msi -> message "run setup to install...", so it does not like to be installed this way.Greetings, Joe Link to comment Share on other sites More sharing options...
blackwingcat Posted October 8, 2015 Author Share Posted October 8, 2015 How about additional option "VSEXTUI=1" ? Hi.I tried msiexec.exe /i netfx30lpa_x86.msi -> message "run setup to install...", so it does not like to be installed this way.Greetings, Joe Link to comment Share on other sites More sharing options...
JosefReisinger Posted October 10, 2015 Share Posted October 10, 2015 Hi.I tried msiexec.exe /i netfx30lpa_x86.msi VSEXTUI=1 -> message "unexpected error installing the package, perhaps a problem with the package. The Error code is 2728" (translated from german). Link to comment Share on other sites More sharing options...
DanR20 Posted October 18, 2015 Share Posted October 18, 2015 Are there any prerequisites for installing Script Host 5.8 other than the Kernel32? The buttons are frozen on the interface so it's impossible to intall it. I've got 5.7 already on the system, would just copying over the 11 newer files be sufficient or does it require registry updates to work properly? Link to comment Share on other sites More sharing options...
blackwingcat Posted October 19, 2015 Author Share Posted October 19, 2015 Hi. Which Package does require WSH 5.8 ? Are there any prerequisites for installing Script Host 5.8 other than the Kernel32? The buttons are frozen on the interface so it's impossible to intall it. I've got 5.7 already on the system, would just copying over the 11 newer files be sufficient or does it require registry updates to work properly? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now