Thauzar

I did that, and I tried with a memorex cd i found out I had left, and i worked, then tried again with the kodak ones, and it worked too I will edit this in a couple of burns to confirm if it's really fixed

If it was the media, it would not have worked with the built-in cdwriter of windows XP... if the drive was incompatible with the media it would have done the same mistake. I have other leads, maybe it's something with NERO and HP, or, I heard it could be a conflict between IMAPI.com something between the built in XP writer and nero that could cause this. Maybe it helps you to help me, cause it's definetely not the media

Hi I just installed a cd writer+ 9300 series from HP. from the 1st burn, I get power calibration error among other stuff. Well the first time it was can't do fixation or something like that, the log is posted next. I use Nero 6.066 and it did it 3 times, while it worked perfectly and fast without any errors when I got mad and used the built-in windows XP cd burning tool. What's wrong? Nero never left me down, is it some incompatibiliy with nero and hp drives cause nero worked fine untile I changed my old mitsumi for this not-so-new-either HP drive. So here is the log with the most errors on it, the fixation error I first encontered is listed there, but now it has power calibration error and can't write EndTrack errors too. Very strange Thauzar Panzer Division Metal 1A25-0806-7130-1281-9670-3469 1A47-0800-0000-1466-6569-0769 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\PROGRA~1\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 17:21:30 Nero Version: 6.6.0.6 Recorder: <HP CD-Writer+ 9300> Version: 1.0b - HA 1 TA 1 - 6.6.0.6 Adapter driver: <atapi> HA 1 Drive buffer : 4096kB Bus Type : default (0) -> ATAPI, detected: ATAPI CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 1 - 6.6.0.6 Adapter driver: <d347prt> HA 2 === Scsi-Device-Map === DiskPeripheral : WDC WD1600JB-00HUA0 atapi Port 0 ID 0 DMA: On CdRomPeripheral : CREATIVE CD3630E AC101 atapi Port 0 ID 1 DMA: On DiskPeripheral : Maxtor 5T060H6 atapi Port 1 ID 0 DMA: On CdRomPeripheral : HP CD-Writer+ 9300 atapi Port 1 ID 1 DMA: On CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 0 DMA: Off CdRomPeripheral : Generic DVD-ROM 1.0 d347prt Port 2 ID 1 DMA: Off === CDRom-Device-Map === CREATIVE CD3630E AC101 F: CDRom0 HP CD-Writer+ 9300 G: CDRom1 Generic DVD-ROM H: CDRom2 Generic DVD-ROM I: CDRom3 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 74448896 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 511MB (523760kB) Free physical memory: 179MB (183936kB) Memory in use : 64 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 13.4.2005 CD-ROM (ISO) 11:54:01 #1 Text 0 File Isodoc.cpp, Line 6168 Iso document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : FALSE Write : TRUE Finalize CD : FALSE Multisession : FALSE Burning mode : TAO Mode : 1 ISO Level : 1 (Max. of 11 = 8 + 3 char) Character set : ISO 9660 Joliet : TRUE Allow pathdepth more than 8 directories : TRUE Allow more than 255 characters in path : TRUE Write ISO9660;1 file extensions : TRUE 11:54:01 #2 Text 0 File Reader.cpp, Line 127 Reader running 11:54:01 #3 Text 0 File Writer.cpp, Line 122 Writer HP CD-Writer+ 9300 running 11:54:01 #4 ISO9660GEN -11 File geniso.cpp, Line 3286 First writeable address = 0 (0x00000000) 11:54:01 #5 Text 0 File Burncd.cpp, Line 3155 Turn on Track-at-once, using CD-R/RW media 11:54:01 #6 Text 0 File DlgWaitCD.cpp, Line 257 Last possible write address on media: 359846 ( 79:59.71) Last address to be written: 341488 ( 75:55.13) 11:54:01 #7 Text 0 File DlgWaitCD.cpp, Line 269 Write in overburning mode: NO (enabled: CD) 11:54:01 #8 Text 0 File DlgWaitCD.cpp, Line 2311 Recorder: HP CD-Writer+ 9300; CDR code: 00 97 24 01; OSJ entry from: Taiyo Yuden Company Limited ATIP Data: Special Info [hex] 1: 80 00 98, 2: 61 18 01 (LI 97:24.01), 3: 4F 3B 48 (LO 79:59.72) Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid) 11:54:01 #9 Text 0 File DlgWaitCD.cpp, Line 431 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:54:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 829 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 341489 (341489) = #341489/75:53.14 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 341487 blocks [HP CD-Writer+ 9300] -------------------------------------------------------------- 11:54:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042 Prepare recorder [HP CD-Writer+ 9300] for write in TAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc not fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 699676672, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ -150 | lead-in | 0 | 0x41 | 0x00 -150 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 341489 | lead-out | 1 | 0x41 | 0x00 11:54:04 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1110 Removed 2 run-out blocks from end of track 1. Length: 341489 -> 341487. 11:54:05 #13 Phase 24 File dlgbrnst.cpp, Line 1832 Caching of files started 11:54:05 #14 Text 0 File Burncd.cpp, Line 4042 Cache writing successful. 11:54:05 #15 Phase 25 File dlgbrnst.cpp, Line 1832 Caching of files completed 11:54:05 #16 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 4x (600 KB/s) 11:54:05 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2604 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 11:54:24 #18 SCSI -1106 File Cdrdrv.cpp, Line 1432 SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03B70000 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x73 Sense Qual: 0x03 CDB Data: 0x2A 0x00 0x00 0x00 0x07 0xE0 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x73 0x03 11:54:24 #19 CDR -1106 File Writer.cpp, Line 311 Power calibration error 11:54:24 #20 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:54:24 #21 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 11:54:24 #22 CDR -201 File WriterStatus.cpp, Line 200 Invalid write state HP CD-Writer+ 9300\H1 T1 11:54:24 #23 TRANSFER -18 File WriterStatus.cpp, Line 200 Could not perform EndTrack 11:54:24 #24 Text 0 File Mmc.cpp, Line 15779 <HP CD-Writer+ 9300 > start Close Session 11:54:24 #25 SCSI -1066 File Cdrdrv.cpp, Line 1178 SCSI Exec, HA 1, TA 1, LUN 0 Status: 0x04 (0x01, SCSI_ERR) HA-Status 0x00 (0x00, OK) TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12 0x00 0x00 0x00 0x00 0x24 0x00 11:54:24 #26 CDR -1066 File WriterStatus.cpp, Line 249 Invalid field in command 11:54:24 #27 TRANSFER -19 File WriterStatus.cpp, Line 249 Could not perform Fixation 11:54:24 #28 Text 0 File WriterStatus.cpp, Line 258 falling back to disc fixation 11:54:24 #29 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 4x (600 KB/s) Existing drivers: File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 2003-10-28 05:02:00 (Prassi/Veritas driver for win 2K) File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004-08-03 22:59:44 (Adapter driver for rec) File 'Drivers\d347prt.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 2004-08-22 17:31:48 (Adapter driver for src) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) Thanks for your help

To make a long story short: had a P2 400mhz and a P2B motherboard. A long time ago in a gallaxy far far away, a young boy flashed the bios with P2BS instead of P2B files and had to change his motherboard and cpu cause it was not powering on anymore. My question, is there a way to revive this old board? cause I had the backup of the right bios, but can't put it back cause computer does not start once you f*cked with the bios. Or maybe someone with a EEPROM writer could help me?

Exactly! thanks parahtml for your reply but I found it out by myself (just to show i'm not that n00b loll)

If it was that simple I would have found it myself. The problem does not happens on a hotmail page, but on the page that is opened by msn prior to the connection to hotmail, C:\Documents and Settings\Thauzar\Local Settings\Temp\spng_redir.html which redirect to hotmail. The thing is that is uses some activeX content and it does not autoredirect to hotmail as it used to. But I don't want to activate activeX for all pages. in security C:\Documents and Settings\Thauzar\Local Settings\Temp\spng_redir.html is not a valid adress for the trusted sites anyway But I found out it has something to do with the SPNG pluggin so I'll write to the author instead

Hi, I noticed since I installed MSN 7 that whenever I click on the email icon on top of the contact list, it opens a IE window to hotmail... nothing new here. The new thing is that it does it using some active X content or whatever that is blocked by IE "for my safety". I then have to tell IE it's ok to show active X content for this page. Then it's ok as long as I don't reboot. I don't want to deactivate this function cause it's really usefull on other sites, but make it stop reacting when MSN tries to open my hotmail mailbox? BTW I have msn plus installed, with SPNG pluggin and patched for ad removed and file transfer enabled (in case this might change something)

It really depends on the computer's stats, on a slower, older system 2k is the best but if you can handle XP without slowing down your computer too much, go for it!

Is there a way to add people from AIM on MSN 6.2 (or 7) cause I'm ok with MSN and I don't want to install another instant messaging program. Else is there another solution? Trillian is not free

Have you tried contacting your ISP? that's the first step i guess

Worked perfectly thanks a lot!!!!

WOOT hehe

I don't care if it's e or d, as long as I can finally upgrade all my computers. So repack the d version with the upgrade thing fix if you listen to those guys, but anyway i don't listen to that file format so i'm not concerned by the trouble if you decide to do a new pack with the e version

Please don't forget the upgrade thing (you know what I'm talking about...) so I don't have to uninstall winamp on all machines prior to updating thanks

whoops. Forgot to add upgrade paths and such (didn't generate a newID for the package). If it's really that big of a deal, I can make the modifications in a few days. Well it just would be easier for me to upgrade all the computers at once without having to uninstall first. But if there is gonna be a E or F version sooner or later I can wait for the next release. But if this is gonna be "final" for a while it would be very nice to add the upgrade thing you mentionned, please Thanks again!

nice! Didn't even know there already was a d version out. But, how come we can't install it on a system with winamp already installed? Before I used to simply install over the previous version. Or maybe i'm having a flashback...

Hey allanoll, I don't want to add pressure or anything, maybe you already answered this question, but are you gonna release a MSI for the 5.08c version of winamp or is it useless in your opinion?

Now there is a 5.08c FINAL release of winamp, I don't know if you are tired allanoll but they are surely testing your patience with all those constant winamp releases. But I guess this time it is final, I hope. Do you plan on redoing the msi or do you say f*ck off?

Thanks Allanoll for this new release. What would we do without you?

it's not that bad, concentrate on school at this time of year, you'll have all christmass for the MSI

Great, I really hope they fixed all the security flaws on this winamp. Thanks allanol for your time and work. Gonna check for updates on this thread often.

What kind of minor problems over time? I need something that works, something I won't have to exchange after only 9 months and something from a company that wants to keep their clients and will do a free replacement. I need a bullet-proof warranty no 3 month sh?t like Creative.

Hi, I bought a Creative MuVo² last january and it always "froze". I think it's the hd having trouble with the small shocks cause I have never dropped it and I don't do any hardcore sports or actions with it. Anyway, now it's dead, it froze for the last time and you know what? CREATIVE OFFERS 90 DAYS WARANTY FOR THEIR 300$ DEVICE!!!!! I am so p***ed cause now i'm gonna have to pay for the shipping to get it repaired, plus, it can cost me up to 180$ if they must replace it. WTF???!!!?!?!?!???? First of all since when a decent company offers 90 days waranty with a 300 usd purchase? Panasonic offers at least 1 year with their discmans, logitech offers at least 1 year with their webcams, heck even dell offers at least one year for their laptops. My question is: should I pay for repair or does anyone have a GOOD offer to make me? I am looking for a small capacity mp3 player, so no 512MB ones, but no 20 gigs one either. I liked the 1,5Gb capacity, the MuVo 4Gb would be cool too but I'd like to buy from another brand then those losers at Creative Labs, a company with respect for their clients who do not s*** money from their a**. sorry for the bad language but **** it im a university student not some pornstar or millionaire. 300$ is hard working money for me and 180$ more plus shipping is just another rock thrown in the pond. So if anyone here got suggestions, I need music fast! Thanks for anyone who replies, and if you work at creative, and you have some professionnal conscience, do something for me, I just can't believe a well known company like creatives can't offer a basic waranty. Thanks, cheers

Good morning everyone happy? Good, I took the time to read the last 4 pages of this post and look what I found? the answer to a06lp's question! So I am glad to post him where to look. Have a great and marvelous day everyone cheers @a06lp: look here man, mazin explained it all. And concerning the autoupdate feature, look again a but further down the same page, me and SMC are giving our codes for the reg file Hope that helps

And to go back to topic... anyone know when Symantec plans to release it's multilang. update of SAV? I'm stil waiting for the french version to come out and I haven't found any info about that during my quick search of symantec's site. The ftp is down this morning, maybe they are updating the files or not loll