myelin

I found the problem. I had a scanner connected by WIFI and also by USB. Once i removed the USB connector wire from PC, the sound went away.

hello guys, i have a problem with my windows 7 64 bit. It is giving constant hardware removal sound in speakers and no notification. I used Process Monitor to identify the problem, but its too technical for me. I dont know what those messages mean? Please can you help me identify cause of notification sound, i am attaching screenshot of process monitor

Hello, i recently came across a spider at a hotel room and i took a pic. How can i use google or any online tool to find name of the spider by just uplading that pic?

... he says the 5th port is "on the card". Could it be one of those that "features 4 external ports and 1 internal port sharing with an external port" ? Oh! Sorry, thus i am clueless.

I am planning to play dx 9 and dx 10 games released before 2008

How many days have you spent in troubleshooting? how many hours will it take for a clean install?

I am sure that this might be the port on your casing and not on your backpanel. right? if yes than you need to attach the casing cable at the rightspot on the mobo. if not than i am clueless like you!

I knew that my board had some problem, but never knew what and never got it checked. Anyway i forgot about it and bought a new harddisk one day and it had its IC immediately blown offcourse i did not noticed it at that time i returned it and got the new one on the same day. So this time instead of attaching the new harddisk i attached my already present hardisk (which had all my lifes work on it!) and boom it stopped working. The problem was a faulty power supply connector. This happened recently and since than i have been trying to get my harddisk fixed but to no avail!

Hello i have this card: Inno3d Ichill Geforce 9600 GT 512 MB and i was wondering what would be the best operating system to get the most from this card while playing games of DX 10 and DX 9 type. Windows XP Pro 32 bit SP2 or SP3 Or Windows 7 32 bit My specs are: Dual core 2.0 GHZ E2180 Intel dg41wv ddr3 4 gb 500 mb Hard disk with 16 MB cache builtin realtek 662 audio 500 PSU power supply Thanks.

ok, i have decided to stay with my system and save for an upgrade. Thanks

ok, i think i got your point, but will 1333 MHZ processor not make a difference over 800 MHZ processor?

I did this and i had beeps and no display at startup. I think Intel has locked these settings with FSB of processor!!! I had to remove the battery to reset CMOS! BTW there are no command rate settings available in Intel board! Thanks i have decided to get ASUS g41 mobo which will allow me to max my ddr 3 to 1333 along with few more tweaks and buy a core 2 duo E6550

One thing though which can be done is to decrease DVMT or whatever to minimum or zero.

Uploaded with ImageShack.us Uploaded with ImageShack.us

Hello i have just bought Intel DG 41 WV board with G41 chipset, it only supports 4GB DD3 @ max 1066 MHZ, so i bought 2 sticks of 2GB 1333 MHZ ram. My Procesor is E2180 Dual core at 2.0 GHZ @ 800 MHZ. Now the problem is that my RAM is running at 800 MHZ and although there are settings to manually change the speed of ram to 1066 in bios, i do not want to change them unless i know what i am doing. These are MHZ settings: 800, 1066 and and SPD settings which are i do not understand. If i just change mhz without changing SPD than i get a beep and i have to reset CMOS If i buy 1333 or 1066 MHZ or just another 1066 MHZ dual core, will my ram automatically switch to 1066 or not? What should be best upgrade for me 1066 FSB or 1333 FSB processor? or should i just keep my 800 MHZ processor? Thanks.

Hello. My name is Safwan and i am Doctor in Pakistan. We here have started a conference on limited resources. Our website runs drupal: www.cancersurgerypk.org What i want to ask is: Which module for drupal should i use to organize and present this site. The site is actually a society website and which has a conference as its event. What should i do and what is the best strategy? Thanks.

Ok. Thanks.

Hello. My question is how can i solve the upgrade problem of my hard disk: I have dual boot Windows XP and Windows 7. The Hard disk with boot info and windows xp is 10gb ide while the other is 320 gb sata II with Widows 7 and all the files. If i upgrade my 10 gb ide hard disk i loose the boot info and windows xp. I want to keep windows xp and windows 7 and i do not want to reinstall both OS again, as you know that we have to install windows xp first and than windows 7 to get windows dual boot. What can i do? Thanks.

@Siginet: Thanks for the explanation. @ IcemanND: That list may keep me busy for some time. Thanks. @ beats: Thanks.

Hello. I have 10gb IDE Hard disk, and i want to transfer the OS on it to another bigger capacity hard drive without going through the installation procedure. How may i achieve this? The computer will remain the same Thanks.

Thanks for the answer. I found the answer elsewhere. Turned out i was a complete rookie for these New CM systems. I found ojs , its made for a research journal. I have installed it and using it happily.

Hello. I have Geforce 5500 256 MB 128 Bit AGP for almost a year now, using it at 4X in Intel 845. I have searched many times, experimented many times using different driver version and found: The latest driver version 175.19 are the best for this card. The best utility for OC is EVGA Precision http://www.evga.com/precision/ The proper frequencies are : Core 290 and Memory 429. There will be asymmetry with any above frequency, as i checked multiple times with UT, 3D Mark 2001. Asymmetries include bots getting very fast even at easy diffculty levels -> means that video card is sending wrong info. My card came with 270 and (200/400) as all these cards. Its made by inno3D. I am non-Professional in Computers, so forgive my non-technical terms. But the info provided has been tested by me multiple times. Thanks.

Hello. I am trying to make website about the journal we are starting. The journal will be publishing latest researches regarding health and medicine. We cannot afford to hire professional services yet, so i have to come up with something. So far i have a domain name .com and officelive as my host. I am thinking about using a content management system to publish all the issues of the journal and index all the things in the articles. To achieve this i will be using: Client side scripting: Frontpage Content management: Typo3 Questions no.1: Is my approach correct? Question no.2: Will i be needing a database program as well? Any type of advise or suggestion or a comment will be very helpful. Thanks.

I did the scan with NOD32 in another computer and it found lots of viruses. But still it is infected with Worm.Win32.autorun variant infection. How do i deal with it? Thanks for the solution anyway.