dziubek Posted May 2, 2006 Share Posted May 2, 2006 (edited) I don't know what Rock Ridge is. Someone else should be able to answer that. What worries me more is the renaming of General_Settings.reg. What are the switches in your ISOconf.txt file?Can you delete ISOconf.txt and test again?ISONAME=WINLite.ISOISOTITLE=HFSLIPCDCDIMGSW=-h -j1 -mMKISSW=-relaxed-filenames -d -D -N -J -no-emul-boot -boot-load-size 4I deleted Kels_UserPass2_addon_v1.CAB and ISOconf.txt and I will test it again Edited May 2, 2006 by dziubek Link to comment Share on other sites More sharing options...
Kiki Burgh Posted May 2, 2006 Share Posted May 2, 2006 (edited) hi all!been away for quite a while ... ;(just wanted to share that all seems fine with those that i have slipstreamed ...only a few things to share though:888111 doesn't seem to recognized when ITs presence is validated via qfecheck ... it does not show in the reporta particular theme addon (VistaCGI if i recall it right) from rynavm prevent the OS from installing ... it shows that line 1 of textsetup.sif is not valid ...there seems to many directories (usually the very 1st folders) added to my i386 directory (i.e., 041, 043, & the like) ... where did these come from?btw, XPIZESW=/S /notask still didn't work for me. XPize installation still showed up at T-13 & i still followed the prompts.may i just ask what the SW is for? thanks! Edited May 2, 2006 by Kiki Burgh Link to comment Share on other sites More sharing options...
tommyp Posted May 2, 2006 Share Posted May 2, 2006 @dziubek - What you are seeing is some LFN in your svcpack directory. It either got there from your HFSVCPACK directory or a non-compliant ryanvm addon. If you are running installation via CD, there is NO NEED to worry about this error message. The only way you will get errors is if you are running a dos prompt install (e.g. winnt.exe). @kiki - Do you get the same folder problem if you are not using application add-ons? Link to comment Share on other sites More sharing options...
Super-Magician Posted May 2, 2006 Share Posted May 2, 2006 Kiki - the SW in XPIZESW just means "switches", like in CDIMGSW and MKISSW (isoconf.txt). Link to comment Share on other sites More sharing options...
Narag Posted May 2, 2006 Share Posted May 2, 2006 I don't know what Rock Ridge is. Someone else should be able to answer that.It doesn't matter for Windows - it's for UNIX purposes only.excerpt from WikipediaThe Rock Ridge Interchange Protocol (RRIP, IEEE P1282) is an extension to the ISO 9660 volume format which adds POSIX file system semantics.The extension adds support for storing Unix-specific file information on ISO 9660 CD-ROMs. The availability of this information allows for better integration with a local Unix filesystem when a mount operation is performed (also see Mount point).These extensions are, briefly: * Longer file names (up to 255 characters) * Fewer restrictions on characters allowed in filenames * UNIX-style file modes, user ids and group ids * Symbolic links * Deeper directory hierarchy Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 2, 2006 Author Share Posted May 2, 2006 (edited) 888111 doesn't seem to recognized when ITs presence is validated via qfecheck ... it does not show in the reportIs qfecheck capable of detecting it? As far as I know, it is only installed if Windows setup thinks it's necessary. It's just a driver update. Are you having audio problems?btw, XPIZESW=/S /notask still didn't work for me. XPize installation still showed up at T-13 & i still followed the prompts.Really strange. SVCPACK.INF doesn't contain the switches even though they are specified in XPize.txt. Can I have a look at your xpize.txt file? Edited May 3, 2006 by Tomcat76 Link to comment Share on other sites More sharing options...
tain Posted May 2, 2006 Share Posted May 2, 2006 Tomcat, would you mind keeping this post/thread up to date? You do a really great job of breaking this stuff down to my level Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 3, 2006 Author Share Posted May 3, 2006 @Kiki: Themes_rytukz_VistaCG_addon_v1.0.cab (and other addons of that type) should be supported with 60503a... @TAiN: You mean that one reference to the HFSVPK folder? Updated. Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 3, 2006 Author Share Posted May 3, 2006 Tomcat - minor prob with writing the run time into HFSLIP.LOG. Obviously it won't get written into the ISO as that's created before the time is generated. Just a head's up .Hah... Well... Should I let HFSLIP extract the ISO, update HFSLIP.LOG and remake the ISO? Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 3, 2006 Author Share Posted May 3, 2006 @dziubekYou have a couple of addons with spaces in their name. Are those the original names or did you change (or make) them yourself? Link to comment Share on other sites More sharing options...
Kiki Burgh Posted May 3, 2006 Share Posted May 3, 2006 (edited) @kiki - Do you get the same folder problem if you are not using application add-ons?I have not added much add-ons except for the ff: VistaCG Theme [v0.98], Microsoft MakeCab v1.00.0601, XnView Complete v1.82.4, Reboot Into Safe Mode v1.0 ... please see the pic attachment for the extra foldersKiki - the SW in XPIZESW just means "switches", like in CDIMGSW and MKISSW (isoconf.txt).thanks for the clarification Super-Magician … I was just thinking that replacing it probably with .exe would make it work888111 doesn't seem to recognized when ITs presence is validated via qfecheck ... it does not show in the reportIs qfecheck capable of detecting it? As far as I know, it is only installed if Windows setup thinks it's necessary. It's just a driver update. Are you having audio problems?If installed separately, High Def Audio shows up in Add-Remove programs list … if included in the HF dir, it doesn’t show when checked via qfe … Please know though that I‘m not having any issue w/ audiobtw, XPIZESW=/S /notask still didn't work for me. XPize installation still showed up at T-13 & i still followed the prompts.Really strange. SVCPACK.INF doesn't contain the switches even though they are specified in XPize.txt. Can I have a look at your xpize.txt file?pls see attachments sir … I’ve included both the SVCPAK & SYSOC.infs … please know I am not having problems w/ the installation … it’s just that I hope I wouldn’t have to answer follow the prompts anymore at T-13@Kiki: Themes_rytukz_VistaCG_addon_v1.0.cab (and other addons of that type) should be supported with 60503a... got the latest already … let me try this ver Jjust the same pls see the pic attachment for the errorthanks guys! this is nothing much ... but may be worth a look ..."Founding" xpize.txtinfs.7z Edited May 3, 2006 by Kiki Burgh Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 3, 2006 Author Share Posted May 3, 2006 @Kiki60503b fixes the XPize problem. I also added something that alerts you which hotfix adds those extra folders. Please let me know which one it is.When you install KB888111 by hand, Windows assumes that you need it. I'll search around to see if it's really better to have Windows force-install it from SVCPACK.Everything should be fine with VistaCG (only checked version 1.0). I'll check the other addons you mentioned.this is nothing much ... but may be worth a look ..."Founding" Yeah... That's why CounterStrike isn't made for DOS... Link to comment Share on other sites More sharing options...
Tomcat76 Posted May 3, 2006 Author Share Posted May 3, 2006 @KikiI had a look at the other addons you mentioned (except Microsoft MakeCab v1.00.0601 which doesn't seem to be available anymore) and don't see a problem. Please use the latest test release (60503c at the moment). If you still get an error referring to "line 1" of TXTSETUP.SIF, I'll have to take a look at your TXTSETUP.SIF file. Link to comment Share on other sites More sharing options...
dziubek Posted May 4, 2006 Share Posted May 4, 2006 @dziubekYou have a couple of addons with spaces in their name. Are those the original names or did you change (or make) them yourself?@allThanks for explanation about The Rock Ridge...@Tomcat76I used only addons from RYAN's forum. I will tidy up addons (upgrade too) from HFAAO and HFSVCPACK and I write raport about that today.dziubek Link to comment Share on other sites More sharing options...
Kiki Burgh Posted May 4, 2006 Share Posted May 4, 2006 (edited) @KikiI had a look at the other addons you mentioned (except Microsoft MakeCab v1.00.0601 which doesn't seem to be available anymore) and don't see a problem. Please use the latest test release (60503c at the moment). If you still get an error referring to "line 1" of TXTSETUP.SIF, I'll have to take a look at your TXTSETUP.SIF file.thanks TC!as always, i have downloaded the latest! sir, do you mind looking into this: http://users.atw.hu/mp-soft/CabSDKAddons_1.0.cab?i've taken the liberty of attaching a zipped sif files (1 without the error & 1 with the error) for your referencejust wondering, for XPize to be silently install would i not need an edited modified SFC_OS.DLL which i got from http://www3.sympatico.ca/lazimute/xpcr_en/SFC_OS.DL_? thanks again!TXTSETUP.zip Edited May 4, 2006 by Kiki Burgh Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now