Jump to content

Recommended Posts

Posted (edited)

I have gone mad

My computer is causing tripping of the electricity of the house

any ideas what is the problem

I changed the SMPS

still the same

I have presently disconnected the CD and DVD rom Drives

This is my third attempt to post

Last two times it tripped

My engineers know nothing

Help...........................

It will trip again

Edited by pulkit

Posted

moved to correct forum. next time please post there immediately :)

as for your problem, what exactly happens with the electricity in your house? the lights burn lower or a whole group says good bye or?

Posted

The main tripper trips down

and sorry for posting in the wrong forum

Pls help

Its urgent

I am scared my devices may become spoiled

Posted

definately change your power supply if your sure its the pc thats causing the tripping... sooner or lately it will kill rest of the pc for sure....tryed a power surge protector in between it? :whistle:

Posted (edited)

No i did i am going to put a UPS in a day

But presently i assembled a new one for my factory and i am using that

There is no tripping

In my computer i disconnected the CD & DVD Drives also

Remaining parts are

Processor,Motherboard,Ram and HDD

Also the monitor but i am using the same LCD 17" with the new assembled one

Pls help

Edited by pulkit
Posted (edited)

Have you tried replacing the power cord? The power supply's fuse would blow before tripping the main breaker if it was the power supply.

I changed the SMPS
He did change the power supply. (Switch Mode Power Supply) Edited by RJM
Posted (edited)
My computer is causing tripping of the electricity of the house

If your blowing a fuse or tripping a breaker in the building's electrical box, that means you are trying to draw too much power from the circuit. Disconnecting the CD and DVD drives isnt going to help you either, because the amount of power those particular components require isnt all that significant when compared with the rest of the system as a whole. You need to go after much bigger fish.

What other devices are plugged into the same electrical outlet or nearby outlets (be as specific as possible)? By the sounds of it you have to move some loads onto another circuit, and simply changing to a nearby outlet does not gaurantee that it will be on a different circuit.

Edited by ssmokee
Posted

Well i thought that these devices consume very minimal power

I just have a monitor (LCD) and the CPU installed

I put a UPS to the computer but not the monitor

But it tripped again

Now i connected the Monitor and the Cabinet to the UPS

Lets see!

Posted

Putting a UPS between the computer and the wall outlet will not help the situation you are describing. You have to reduce the amount of power you are drawing from the circuit, and putting a UPS in will not lower the power draw. It should let the computer stay running while you go reset the breaker, but that is about all it will accomplish. LCD monitors do not use a significant amount of power either (probably 40-75 Watts when in use). You need to find something that uses several hundred watts or more, and move it to another circuit.

What amperage are youre fuses/breakers? Standard 15 Amp?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...