jonazz Posted February 13, 2006 Share Posted February 13, 2006 (edited) doh... wrong hotfix number. I got 242975dan8.exe I need 291362 and 239696In another thread they mention which email to use, to get the hotfixes send from microsoft. But I don't know if it is best to write the email in englsih and ask for the danish update or I should write the entire email in danish. In the other thread all the updates' names are like 250514UP.EXE. If I should ask for Q291362 and Q239696 in danish which filenames should I then exact ask for? Edited February 13, 2006 by jonazz Link to comment Share on other sites More sharing options...
Petr Posted February 13, 2006 Share Posted February 13, 2006 doh... wrong hotfix number. I got 242975dan8.exe I need 291362 and 239696In another thread they mention which email to use, to get the hotfixes send from microsoft. But I don't know if it is best to write the email in englsih and ask for the danish update or I should write the entire email in danish. In the other thread all the updates' names are like 250514UP.EXE. If I should ask for Q291362 and Q239696 in danish which filenames should I then exact ask for?I think you can either ask international Microsoft support in English or Danish support in Danish. I'd call Danish Microsoft ( http://www.microsoft.com/danmark/msdk/content/cservice.asp ) and ask them where to get the hotfix. Just ask for sending hotfix, not for any support.The file names will be 291362DAN8.EXE and 239696DAN8.EXE.Petr Link to comment Share on other sites More sharing options...
jonazz Posted February 13, 2006 Share Posted February 13, 2006 okay, thanks for the answer. I'll try calling them tomorrow.Could I send the 3 hotfixes to you, and ask you to compile a danish compilation, like nusb22da.exe?I haven't used the iexpress tool before. Link to comment Share on other sites More sharing options...
Petr Posted February 13, 2006 Share Posted February 13, 2006 doh... wrong hotfix number. I got 242975dan8.exe I need 291362 and 239696I tried to localize IOS.VXD and USER.EXE from these hotfixes, you can find them here: http://www.winpack.org/petr/dan.zip . No warranty that they are OK but I believe so.Petr Link to comment Share on other sites More sharing options...
jonazz Posted February 13, 2006 Share Posted February 13, 2006 Thanks a lot for all the help Petr. I just used the nusb211se.sed file you posted earlier and repacked it with the danish files, and now i got a fully danish windows again. Link to comment Share on other sites More sharing options...
mcdull Posted February 22, 2006 Share Posted February 22, 2006 I need some technical help on the usb driver.I have installed the driver in my Windows 98 and most of the devices were detected correctly.I have a 865G chip board and therefore the board should have USB 2.0 ready.I have also download and installed the USB 2.0 driver from Intel and the device manager contained the following USB controller:"Intel® 82801EB USB2 Enhanced Host Controller - 24DD"However, when I attached the external hdd and start transferring a folder with around 260MB content, it required more than 5 minutes to finish. So it should end up using USB 1.1 for transfer.So, my question is:1. Do the driver support USB 2.0 with high speed?2. How can I prove or determine if the device is running at USB 2.0 speed? (except from the transfer speed)3. Any other suggestion to speed up the transfer?4. A sidetracked question. How could I make 2 identical USB-IDE devices co-exist?Thanks alot Link to comment Share on other sites More sharing options...
Petr Posted February 22, 2006 Share Posted February 22, 2006 1. Do the driver support USB 2.0 with high speed?2. How can I prove or determine if the device is running at USB 2.0 speed? (except from the transfer speed)3. Any other suggestion to speed up the transfer?4. A sidetracked question. How could I make 2 identical USB-IDE devices co-exist?Maximus Decim USB Driver contains just mass storage driver, not low level drivers for USB chips."Intel® 82801EB USB2 Enhanced Host Controller - 24DD" requires Orangeware driver 1.01.0000.2, this is the only one driver version that works with ICH5 southbridge. It shall be available for download from the website of your motherboard manufaturer.You can use usbview utility to check whether your devices are connected to USB 1.1 hub or to USB 2.0 hubPetr Link to comment Share on other sites More sharing options...
chucknobucks Posted February 23, 2006 Share Posted February 23, 2006 Maximus-Decim,Thanks so much for for the nusb22e.exe drivers. I installed the drivers in my old 98se Dell Optiplex GXa, 440LX, 333MHz PII and they work great. USB flash drives are so much better than using floppies or CDs to transfer files, I really can't tell you how much I appreciate it. So far, only one little bug concerns me. That is when I click on the Unplug or Eject Hardware icon and follow the prompts until the Wizard says it's O.K. to remove the device, the LED on the flash drive is still on. With my XP tower, the LED goes off when I reach this point. I'm not familiar enough with this technology to know if it is safe to remove a USB flash drive if the LED is still on, so I'm playing it safe and working around it by just shutting down first. Very minor concern for the benefits realized, but if you could let me know your thoughts/advice on this, I would feel better about just trying a possible hot-unplug. Meanwhile, I'll Google around and see if I can get more education on the subject.Thanks again... Link to comment Share on other sites More sharing options...
Wijono Posted February 23, 2006 Share Posted February 23, 2006 By chance I found out that in his "Native USB ver.2.2" maximus-decim is using also Update KB242975, which is "Update for 1394 Storage Peripherals in Windows 98 Second Edition". It is the pair "Systray.exe" and "Hotplug.dll" that are doing the job for "Unplug or eject hardware", which is also meant to unplug a 1394 (FireWire) device, no wonder it takes quite long to do the so called Safe Removal of a USB device. Anyway it still is a great work from maximus-decim!!Down the road in this thread, I was asking the possibility of achieving this Safe Removal behaviour as it is in Windows XP, where we can opt for "Safely Remove Hardware" in the notification area or just simply right-click the drive in Windows Explorer and click "Eject". With the NUSB-2.2, if we click "Eject", then we will get "Unsafe Removal of Device" error message.In the thread, iscove has written about hotplug icon that is controlled by the following key in the registry:HKCU\Software\Microsoft\Windows\CV\Applets\SysTrayHotPlugFlags = 0x00000002Services = 0x0000000dWell, "Services" does control what is displayed in the System Tray. As to "HotPlugFlags", I have done an experiment with different values, with the hope to achieve the XP behaviour mentioned above to no avail.I won't give up, I tried to look into the "Systray.exe", and changed only one Byte in it to bypass the error trapping routine, voila!! Now I get it work as in WinXP, I can still opt for the "Unplug or eject hardware", or for a simple thumbdrive just right-click and eject with no more "Unsafe Removal of Device" error message. Link to comment Share on other sites More sharing options...
Darra Posted February 25, 2006 Share Posted February 25, 2006 Maximus Decim Native USB ver.2.2------------------------------------------------------------------------Only for Windows 98SE English !!!Native (without installation of additional drivers for each type) support USB flash drives, digital photo and videocameras and other similar devices.Remember! You install it at own risk!Before installation remove ALL of driver USB flash drivs, available in system.What's new?1.Fixed bug "USB Diagnostic Device"2.New devices are added.------------------------------------------------------------------------http://rapidshare.de/files/1217842/nusb22e.exe.htmlHello. Just to let you know...I installed your USB driver pack on: Windows 98 Finnish ,and it works 100%.So seems it works also for normal Win98 and non-english versions aswell.. Link to comment Share on other sites More sharing options...
Petr Posted February 25, 2006 Share Posted February 25, 2006 Hello. Just to let you know...I installed your USB driver pack on: Windows 98 Finnish ,and it works 100%.So seems it works also for normal Win98 and non-english versions aswell..The following Windows 98 versions are based on so called "United States version": English, German, Italian, Norwegian, Swedish, Dutch, French, Spanish, Portuguese, Danish, Finnish, Russian, Polish, Hungarian, Greek, Turkish, Czech, Slovak, Slovenian, Portuguese-Brazil, and others. These versions contains exactly the same code, just text strings differ.nUSB driver contains English version of several files that are localized (translated) for non English W98 versions. Therefore many text strings and dialogues will change from the local language to English after installing the English version of nUSB. But everything will work because of the same binary code.Petr Link to comment Share on other sites More sharing options...
Wijono Posted February 28, 2006 Share Posted February 28, 2006 (edited) Mille was asking what byte pattern to search and what byte to change in order to achieve the hot plug behavior as it is in the WinXP.Make sure that you have done Maximus Decim Native USB patch, and that the SYSTRAY.EXE Version is 4.10.0.2224, file size 27,648 bytes. Copy SYSTRAY.EXE to a temporary folder, then with a binary editor search for following byte pattern: 75 1B 52 68, once you find it, change the byte 75 with EB. What you will do is basically changing the instruction from "JNZ SHORT" (75) to certain address to "JMP SHORT" (EB) to certain address, thereby bypassing the "Unsafe Dialog". Once you did it, I would recommend you to use SFC to replace the original SYSTRAY.EXE by the one you have patched, so that you will have a backup just in case...Hope that helps.Now the last words, I can guarantee nothing about and I am not responsible for this patch. It works great for me. So if you decide to do it, the risk is fully yours. Edited February 28, 2006 by Wijono Link to comment Share on other sites More sharing options...
Wijono Posted March 1, 2006 Share Posted March 1, 2006 It seems impossible to download the 2.2.1. update from the following link:http://rapidshare.de/files/6032283/nusb221e_upd.zip.htmlIs there another link (mirror site) we can download it from? Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted March 1, 2006 Share Posted March 1, 2006 (edited) Will this usb pack support sony psp and ipod becuz both use mass storage driversif so u r the best, if not u r still the best Edited March 13, 2006 by PROBLEMCHYLD Link to comment Share on other sites More sharing options...
Mille Posted March 1, 2006 Share Posted March 1, 2006 Thanks Wijono the Patch works great. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now