Messerschmitt

Thanks Jeremy, managed to uninstall it. I don't know about that llxx, nor I am familiar with the term LSP

I have Netlimiter installed for some time now, when one day gave me a "Check Faild" I have then somehow deleted the program for a reinstall, but I did not deleted it as normaly, from add/remove programs, I just went to my HDD and physicaly removed it (Shift+delete on the folder). Then I remembered the program is set up in add/remove programs. Now I cannot fully remove the program. What makes matter worse is that it still applies it's setting to certain programs, limiting my bandwith usage by those programs. History: If I try to install again the copy through the setup it tells me that "Previous version of Netlimiter was detected, please uninstall first". But I totaly phisicaly deleted the program. I have runned registry fixes, but no difference. Somebody then sended me a archive, and I just put it in the old netlimiter location. If I run it, it gives me the same error I had "Check Faild" then the GUI opens but it's not operational. If I execute the uninstaller from the arhive, it instantely tells me that "In order to complete the uninstall I have to reset the machine" but after the reset, nothing happens. Computer still thinks I have the netlimiter installed as I cannot install the copy using the setup.exe I have as it gives me the same error message "Previous version of Netlimiter detected..." Please if anyone have any ideas how I can clean this I would be very gratefull. Emailed their support as well, but did not got any response. Thank you

Hello. Because of some errors that Net limiter was giving to me I have uninstalled it and tried to reinstall but its says that I need to uninstall it. I have deleted it, I have deleted it from add/remove, I even gone to registrys - software and deleted it from there too but it stills tell me to uninstall it to install it again. Anyone know what else from registry I must delete, and if there is any site/email I could email for support from the producer? Thank you

Well I am not good at this at all, but my common sence tells me that LSASS and PnP Exploit is something bad... Don't know about Lovesan tho that sounds like a malicious file too. And they are all comming from my ISP according to tracking. But what exactely does they do anyway?

Hello. This is what exact happened. Everytime I am at this new ISP, Every few days I get my internet ethernet card to: Limited or no connectivity. All of the sudden it just happen, sometimes I just turn it on and I find out I don't have internet or it just starts from nowere while navigating (4 times now in 2 weeks). What I have obsrved is that in order to make the ethernet card again to attempt to connect to the internet I need to close/disamble (one time even un-install) Outpost Firewall. Today when I did closed Outpost, and re-connected to internet, after 5 seconds, my Karspesky Antivirus detected the following attacks. LSASS Exploit via TCP Protocol, adress *ISP* to local port 445 PnP Exploit via TCP Protocol, adress *ISP* to local port 445 Lovesan via TCP Protocol, adress *ISP* to local port 135 What all these means? Should I phone my ISP and ask for explanations? And why my internet allways fall down at some random times and only way I can make my ethernet card reconnect is to disamble Outpost Firewall? (After reconnecting, and starting Outpost the internet will work for another couple of days)

Bumpy So nobody used macro express and/or know some of the questions I have? Cheers

Ok I just got these and tried it. I ususaly want to use it in a game I have. Here are my problems. 1. The mouse is lagging. It moves slower than I moved it when I recorded. Even when I tested it on my desktop, it moved way slower. I have discovered that if I delete all the delays between it then move as it should, but the program is puting delays after each mouse position, what do I do so the mouse will move real-time, like it moved when I recorded? 2. I want a loop to be exactely 150 seconds. The thing is that by adding up all the delays to result 150 seconds dosent work, as it seems that even a click is somehow taking up time. How can I use such a delay variable, that change in such way that the total loop will result in exactely 150 seconds. Right now the loop is allways delayed by about 0.5 - 1 second per loop, and my only hunch is that the mouse click, and drop plus the only 2 mouse positions that I got in the loop are making this extra delay. 3. How can I alt-tab between programs of the same type. What I mean is, when the macro needs to be done, it will alt tab from my current window to the window it must do the macro. This I have succeded by using the Activate or Lunch, but I have 2 clients of the same thing, so they are having the exact name. What I have observed is that it allways pick the last client I was in. How do I make it pick only 1 specific client? (My clients are named for example "program1" and "program1" and because the name are the same it just pick up the last one I was in". Also what variable I must use so that after the program is activate and macro is running, when the macro is finished, it will alt-tab again to the last window I was in (for example internet explorer if I was there before the macro switched to "program1") If anyone can help I would be highly gratefull. Thanks

Hello Everytime I backup a image of C drive on my E partition a VIRTPART.DAT file apears on drive C. This time it have 26 Megs... Anyone know why does it apear? Or what are the connection between them? Can I delete it? My image file that I made of drive C is keept in drive E Thank you

I got 2 HDD's and 2 CD-rom/writers (1 rom 1 writer) In my boot I got selected auto from BIOS Then when pressinf F8 and going to boot menu I got: 1.Floppy 2.HDD (my master HDD) 3.HDD (my slave HDD) 4.CD-ROM When I tried to bot from my cd-writer it didn't done anything and after a time it automaticaly booted the windows. The CD-ROM is TEAC and it is Master The CD-Writer is LG and it is Slave. How can I make the CD-Writer be selectable in Boot menu? The boot as I said it is set on auto and the boot order is: First:Floppy Second:HDD Thrid:CD-ROM. My motherboard is a SIS735 (realy old one)

Ok I finaly done it. It seems that I needed to rise a little more the sound time as for the english variant did had a 8 second long scene at the end. Cheers

The thing is BIOS detects by itself the boot order. I have 2 HDD's, he detects them both. When I come to the boot screen I have: 1. Floppy 2. HDD 1 (my first harddisk, master) 3. HDD 2 (my second harddisk, slave) 4. CD-ROM (I dont know witch but I think the TEAC, because as I said it didnt booted form the LG) Opening the case is almost impossible :/ And I am not sure how to update the LG firmware... P.S. What I have discovered is that only the Disk 1 is not read by teac, other 4 disks that contains the rest of the image are ok.

Thanks a lot for all the information, will help me a lot. I will look into it and will try my best to figure it out. Probabely some friends that know to work with audacity will help me too. Will return later to tell you how it worked and maybe for a few more help

Hello. I have recently maked a disk image with Norton Ghost 2003. 5 CD's to be more exact. The problem is that if I want to read my CD with the TEAC Cd-rom, it won't read it. Its trying and trying and trying to read but no progress. Only my LG Cd-writer is reading them, the same cd-writer on witch I have burned them. 1. Can anyone give me any info why this happens? Any way my TEAC could read it? Now I want to run the disk images from boot so I can test them in case windows dosent start up. But at the boot menu I only got floppy, HDD 1, HDD 2, CD-Rom. When selecting CD-Rom it dosent do anything for a while then skips to windows and goes as normal in desktop. 2.How can I activate my LG-Writer so I can boot from it? At the BIOS settings I have only found CD-Rom, any other option didn't seemed to me the right one. My LG is set on slave. Thanks a lot

No the software is correctly instaled. but I just inverted my speakers on my desk because of the design that dosent allow me to operate good my control speaker from the right (so I puted it in the left side). I wonder if there is any options in windows xp... or a program?

How can I invert the sound in XP? I have my speakers inverted and what should I hear in left, I hear in right. I don't want to invert my speakers because of the design, it is very frustrating to inverse them.

No shotgun unfortunately this is not viable anymore... The English version have 1:17, the other version have 1:14, so there is 3 minutes desyncronization, and both movies have all the scenes included. What can I say is that the 1:14 movie is player faster with a total of 3 minutes than the 1:17. Probabely is there a solution to strech the sound? Tho I don't think this will resolve anything since the phareses are closer to each other since the movie is played faster.

Em I have sended you a PM, would be much easier to comunicate like that, and possible help me Thanks

Works, thanks a lot

Hello today I started to get this error, xvid.dll not found. What I did in the last days is to install WinAVI, make a DVD, install Neodivx, rip a DVD (had no idea what it does, it just created another dvd ) install HeadAC, didn't played with it yet. First I observed when I downloaded a .avi and this error apeard. I thought its because the file. Then I seen I got the same error when ACDSee opened a image (never got it before with ACDSee). Other .avi that I had before seems to work still. Any sugestions what could I do?

I did a DVD out of AVI, and it works, I mean it is wide screen and stuff BUT, the off-sides that were cut aren't regianed . To open the movie I must open either a batch .vob that is a part, or a .info (or somthing like this) witch opens the entire movie. My question would be now. Is there any way to create an .avi that is wide screen out of this and occupy 700mbs? I don't have a DVD-rom neither DVD-CD's, so all my movies are .avi and I keep them on the HDD. Also I noticed that the wide screen variant is only available when create a DVD. If you have used this, could you please give me some advices what should I do next? Thanks

Hello. I would like some help in the following thing: I got 2 movies .avi almost of the same size 700.3 and 700.8 mb's One movie is wide screen but hungarian translation One movie is full screen and it's in english. Now I would like to get the wide screen variant but with english translation. So basicaly make one movie that is wide screen and in english. Could anyone give me any advice how can that be acomplished? As far as I seen, the movies both start in the same state, (Ex: Universal introduction). The Wide screen variant is just 3 minutes short, maybe the credits were cut off, thats all. Please help. Any advice would be wonderfull Thank you

Thank you for your feedback, greately apriciated... I would like a little more feedback before I start doing this operation please. Thank you

Good day, I have some questions about the Norton Ghost. First of all I understood that this one is one of the best to save the entire C: partition as for backup in case somthing get screwd and you can restore your full system by only restoring the image. Now the first questions I have is: 1. When I try to do the C: image it says that my USB devices need atention (I have my mouse and my joystick). Type of device canot be determined. Can you please guide me how to use the advance setting to fix this problem? (I am most worried about my mouse, because I don't want to remain without it in a delicate state). 2. After I resolve the USB problem, should I worry about anything once the program is starting? I readed that it might have problems, might not return to windows, and stuff like that. The question is for the people that actualy maked a Ghost image, please tell me what to expect and how to fix if some problems may arrise. I am asking this because I realy, realy don't want to screw my C drive, because right now, I have configured my system in a way I didn't in 5 years. That is why I am thinking to use a image to preserve this. The reason I am saying this is part one because after I manage to go throught this process I have some questions about restore - DOS - Windows XP - NTFS stuff that I heard about this. Thank you for all input you guys can offer about these questions. Cheers

Maked MPC to capture. Works like a charm, with shortcut and stuff. All the thanks to the sourceforge guys.

Mine saved at 448X336 Not even 640 Any other sugestions? Also I see there is no shortcut to actualy snapshot the imges when you exactely want