urie
MemberContent Type
Profiles
Forums
Events
Everything posted by urie
-
Inno Setup ® Installer. setup.exe /Option Install Options /LOADINF="filename" Instructs Setup to load the settings from the specified file after having checked the command line. This file can be prepared using the '/SAVEINF=' command as explained below. Don't forget to use quotes if the filename contains spaces. /SAVEINF="filename" Instructs Setup to save installation settings to the specified file. Don't forget to use quotes if the filename contains spaces. /LANG=language Specifies the language to use. language specifies the internal name of the language as specified in a [Languages] section entry. When a valid /LANG parameter is used, the Select Language dialog will be suppressed. /DIR="x:\dirname" Overrides the default directory name displayed on the Select Destination Location wizard page. A fully qualified pathname must be specified. /GROUP="folder name" Overrides the default folder name displayed on the Select Start Menu Folder wizard page. If the [Setup] section directive DisableProgramGroupPage was set to yes, this command line parameter is ignored. /NOICONS Instructs Setup to initially check the Don't create any icons check box on the Select Start Menu Folder wizard page. /NOCANCEL Prevents the user from cancelling during the installation process, by disabling the Cancel button and ignoring clicks on the close button. Useful along with '/SILENT' or '/VERYSILENT'. /COMPONENTS="comma separated list of component names" Overrides the default components settings. Using this command line parameter causes Setup to automatically select a custom type. /TASKS="comma separated list of task names" * Applies to Inno Setup version 5.1.4, and above. Specifies a list of tasks that should be initially selected or deselected. To deselect a task, prefix its name with a "!" character. Only the specified tasks (and their children) will be selected; the rest will be deselected. Use the /MERGETASKS parameter instead if you want to keep the default set of tasks and only select/deselect some of them. Examples: Deselect all tasks, then select the "desktopicon" and "fileassoc" tasks: /TASKS="desktopicon,fileassoc" Deselect all tasks, then select a parent task item, but exclude one of its children: /TASKS="parent,!parent\child" /MERGETASKS="comma separated list of task names" * Applies to Inno Setup version 5.1.4, and above. Like the /TASKS parameter, except the specified tasks will be merged with the set of tasks that would have otherwise been selected by default. If UsePreviousTasks is set to yes, the specified tasks will be selected/deselected after any previous tasks are restored. Examples: Keep the default set of selected tasks, but additionally select the "desktopicon" and "fileassoc" tasks: /MERGETASKS="desktopicon,fileassoc" Keep the default set of selected tasks, but deselect the "desktopicon" task: /MERGETASKS="!desktopicon" /PASSWORD=password Specifies the password to use. If the [Setup] section directive Password was not set, this command line parameter is ignored. When an invalid password is specified, this command line parameter is also ignored. Display Options /SP- Disables the This will install... Do you wish to continue? prompt at the beginning of Setup. Of course, this will have no effect if the DisableStartupPrompt [Setup] section directive was set to yes. /SILENT /VERYSILENT Instructs Setup to be silent or very silent. When Setup is silent the wizard and the background window are not displayed but the installation progress window is. When a setup is very silent this installation progress window is not displayed. Everything else is normal so for example error messages during installation are displayed and the startup prompt is (if you haven't disabled it with DisableStartupPrompt or the '/SP-' command line option explained above) If a restart is necessary and the '/NORESTART' command isn't used (see below) and Setup is silent, it will display a Reboot now? message box. If it's very silent it will reboot without asking. /SUPPRESSMSGBOXES Instructs Setup to suppress message boxes. Only has an effect when combined with '/SILENT' and '/VERYSILENT'. The default response in situations where there's a choice is: Yes in a 'Keep newer file?' situation. No in a 'File exists, confirm overwrite.' situation. Abort in Abort/Retry situations. Cancel in Retry/Cancel situations. Yes (=continue) in a DiskSpaceWarning/DirExists/DirDoesntExist/NoUninstallWarning/ExitSetupMessage/ConfirmUninstall situation. Yes (=restart) in a FinishedRestartMessage/UninstalledAndNeedsRestart situation. 5 message boxes are not suppressible: The About Setup message box. The Exit Setup? message box. The FileNotInDir2 message box displayed when Setup requires a new disk to be inserted and the disk was not found. Any (error) message box displayed before Setup (or Uninstall) could read the command line parameters. Any message box displayed by [Code] support function MsgBox. Restart Options /NORESTART Instructs Setup not to reboot even if it's necessary. /RESTARTEXITCODE=exit code Specifies the custom exit code that Setup is to return when a restart is needed. Useful along with '/NORESTART'. Logging Options /LOG Causes Setup to create a log file in the user's TEMP directory detailing file installation and [Run] actions taken during the installation process. This can be a helpful debugging aid. For example, if you suspect a file isn't being replaced when you believe it should be (or vice versa), the log file will tell you if the file was really skipped, and why. The log file is created with a unique name based on the current date. (It will not overwrite or append to existing files.) The information contained in the log file is technical in nature and therefore not intended to be understandable by end users. Nor is it designed to be machine-parseable; the format of the file is subject to change without notice. /LOG="filename" Same as /LOG, except it allows you to specify a fixed path/filename to use for the log file. If a file with the specified name already exists it will be overwritten. If the file cannot be created, Setup will abort with an error message. Also check out CMenu and SendToA3X by Mhz both excellent programs for identifying installers and listing various switches, link below. http://uawiki.org/CMenu/
-
-
you may need .net installed
-
Look SpOOf You say nuthin works for you but you fail to say why??? or post your methods??? or ans files etc??? Button pushin progs are only helpful if you know what they do & a basic understanding on how to manually do the task. Martins method above does in fact work & will produce the log file to prove it... Vista pnp drivers however are another story, manufacturers ware will tell you they work fine with Vista etc. However I know better than to believe them. Not all of them mind you. .....Statements like, "Still no go", "It doesn't work", do not help us or you to sort your problem....... what i use is a clean Vista RTM version Dutch. And did exactly what it says, and tested the iso's in Vmware. The Autounattend.xml works fine. The Hotfix integration works fine. But the drivers will not work, and so isnt maxxpsoft's tool. Maybe its cause i dont have a English Vista.
-
http://uawiki.org/CMenu/
-
Unattended Guide for Vista
urie replied to Incroyable HULK's topic in Unattended Windows Vista/Server 2008
VistaUA will do this take you from start to finish and create iso and burn it:)) http://www.msfn.org/board/index.php?s=&showtopic=93215&view=findpost&p=627262 -
urie
-
Hey Maxx, just got you message will talk tommorrow but does this mean your are adding $OEM$ to wim file or just folders couse i know we $OEM$ working before last october. P.S. MSFN is still playing up for me dont know whay to problems on other forums:((
-
it uses innosetup. Inno Setup ® Installer. setup.exe /Option Install Options /LOADINF="filename" Instructs Setup to load the settings from the specified file after having checked the command line. This file can be prepared using the '/SAVEINF=' command as explained below. Don't forget to use quotes if the filename contains spaces. /SAVEINF="filename" Instructs Setup to save installation settings to the specified file. Don't forget to use quotes if the filename contains spaces. /LANG=language Specifies the language to use. language specifies the internal name of the language as specified in a [Languages] section entry. When a valid /LANG parameter is used, the Select Language dialog will be suppressed. /DIR="x:\dirname" Overrides the default directory name displayed on the Select Destination Location wizard page. A fully qualified pathname must be specified. /GROUP="folder name" Overrides the default folder name displayed on the Select Start Menu Folder wizard page. If the [Setup] section directive DisableProgramGroupPage was set to yes, this command line parameter is ignored. /NOICONS Instructs Setup to initially check the Don't create any icons check box on the Select Start Menu Folder wizard page. /NOCANCEL Prevents the user from cancelling during the installation process, by disabling the Cancel button and ignoring clicks on the close button. Useful along with '/SILENT' or '/VERYSILENT'. /COMPONENTS="comma separated list of component names" Overrides the default components settings. Using this command line parameter causes Setup to automatically select a custom type. /TASKS="comma separated list of task names" * Applies to Inno Setup version 5.1.4, and above. Specifies a list of tasks that should be initially selected or deselected. To deselect a task, prefix its name with a "!" character. Only the specified tasks (and their children) will be selected; the rest will be deselected. Use the /MERGETASKS parameter instead if you want to keep the default set of tasks and only select/deselect some of them. Examples: Deselect all tasks, then select the "desktopicon" and "fileassoc" tasks: /TASKS="desktopicon,fileassoc" Deselect all tasks, then select a parent task item, but exclude one of its children: /TASKS="parent,!parent\child" /MERGETASKS="comma separated list of task names" * Applies to Inno Setup version 5.1.4, and above. Like the /TASKS parameter, except the specified tasks will be merged with the set of tasks that would have otherwise been selected by default. If UsePreviousTasks is set to yes, the specified tasks will be selected/deselected after any previous tasks are restored. Examples: Keep the default set of selected tasks, but additionally select the "desktopicon" and "fileassoc" tasks: /MERGETASKS="desktopicon,fileassoc" Keep the default set of selected tasks, but deselect the "desktopicon" task: /MERGETASKS="!desktopicon" /PASSWORD=password Specifies the password to use. If the [Setup] section directive Password was not set, this command line parameter is ignored. When an invalid password is specified, this command line parameter is also ignored. Display Options /SP- Disables the This will install... Do you wish to continue? prompt at the beginning of Setup. Of course, this will have no effect if the DisableStartupPrompt [Setup] section directive was set to yes. /SILENT /VERYSILENT Instructs Setup to be silent or very silent. When Setup is silent the wizard and the background window are not displayed but the installation progress window is. When a setup is very silent this installation progress window is not displayed. Everything else is normal so for example error messages during installation are displayed and the startup prompt is (if you haven't disabled it with DisableStartupPrompt or the '/SP-' command line option explained above) If a restart is necessary and the '/NORESTART' command isn't used (see below) and Setup is silent, it will display a Reboot now? message box. If it's very silent it will reboot without asking. /SUPPRESSMSGBOXES Instructs Setup to suppress message boxes. Only has an effect when combined with '/SILENT' and '/VERYSILENT'. The default response in situations where there's a choice is: Yes in a 'Keep newer file?' situation. No in a 'File exists, confirm overwrite.' situation. Abort in Abort/Retry situations. Cancel in Retry/Cancel situations. Yes (=continue) in a DiskSpaceWarning/DirExists/DirDoesntExist/NoUninstallWarning/ExitSetupMessage/ConfirmUninstall situation. Yes (=restart) in a FinishedRestartMessage/UninstalledAndNeedsRestart situation. 5 message boxes are not suppressible: The About Setup message box. The Exit Setup? message box. The FileNotInDir2 message box displayed when Setup requires a new disk to be inserted and the disk was not found. Any (error) message box displayed before Setup (or Uninstall) could read the command line parameters. Any message box displayed by [Code] support function MsgBox. Restart Options /NORESTART Instructs Setup not to reboot even if it's necessary. /RESTARTEXITCODE=exit code Specifies the custom exit code that Setup is to return when a restart is needed. Useful along with '/NORESTART'. Logging Options /LOG Causes Setup to create a log file in the user's TEMP directory detailing file installation and [Run] actions taken during the installation process. This can be a helpful debugging aid. For example, if you suspect a file isn't being replaced when you believe it should be (or vice versa), the log file will tell you if the file was really skipped, and why. The log file is created with a unique name based on the current date. (It will not overwrite or append to existing files.) The information contained in the log file is technical in nature and therefore not intended to be understandable by end users. Nor is it designed to be machine-parseable; the format of the file is subject to change without notice. /LOG="filename" Same as /LOG, except it allows you to specify a fixed path/filename to use for the log file. If a file with the specified name already exists it will be overwritten. If the file cannot be created, Setup will abort with an error message. CMenu Options AutoIt Usage Template AutoIt Script, requires no recording. Create the Au3 template script. Edit any variables at the start of the script, and and shortcuts, that require deletion. Refer to the CMenu Help Guide. It displays sample highlighted items, to edit. Compile the script, into an exe, and keep it with the installer. Run the compiled exe, to install. ; If recorded with CMenu, the ProgramName.inf is saved to the installer directory. Command line Usage Record an installation. Change filenames in command, to suit. Setup.exe /SAVEINF="c:\ProgramName.inf" The ProgramName.inf is saved to the root of c:\ drive, as to above command. But, CMenu record will save the ProgramName.inf to the installer directory. To silently install, use: Setup.exe /VERYSILENT /SP- /LOADINF="Full Address to\ProgramName.inf" You can add more parameters, as required. ; Or not record the install, and use parameters above, to the commandline. http://uawiki.org/CMenu/
-
a sample autounattend.xml - working good
urie replied to prathapml's topic in Unattended Windows Vista/Server 2008
@FireGeier, we are talking paths here to dvd ideally we dont want full path thought we had it with configsetroot but as you know works, fair enought you can add to a cleanup.CMD to delete configsetroot from windows folder grab back some Hdrive space but as far as vista go's it any files it is looking for wont goto windows it will be looking for c:\window\configsetroot\ ok that maybey fair enought like old I386 folder if you have mabey a oem machine, but we are talking here about unattend vista for normal peeps not rollouts and syspreping i think the forum needs split up , as was in unattendxp section there was a seperate thread for RIS, also let me know how you get on with %CDRoot% dont have a chance to test tommorrow busy but last time i searched for %CDRoot% on net it turnd up Linux.. P.S. maxxp and myselfe tried %CDRoot% months ago but you never know maybey small typo error can happen. also have you acctually thought about what nDrew ids saying i,e %CDRoot%\soft\Office2007.exe this aint in PE aint drivers were talking must be adding at <settings pass="oobeSystem"> <component name="Microsoft-Windows-Shell-Setup" this is software install after PE vista will access and search for paths then maybey %CDRoot% would work just a thought, we ar all in the same boat MS guidlines are clear to all:)) yeah if you can make head or tail to them:) -
<component name="Microsoft-Windows-PnpCustomizationsWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <DriverPaths> <PathAndCredentials wcm:action="add" wcm:keyValue="1"> <Path>%configsetroot%\pnpDrivers</Path> </PathAndCredentials> </DriverPaths> </component> Any one else noticed this or have a solution?
-
@Jeroeneke you have, <InstallFrom> <MetaData wcm:action="add"> <Value>1</Value> <Key>/IMAGE/INDEX</Key> </MetaData> </InstallFrom> Should Be, <InstallFrom> <MetaData wcm:action="add"> <Key>/IMAGE/INDEX</Key> <Value>1</Value> </MetaData> </InstallFrom>
-
Yes it does
-
/S works with NSIS
-
@Shark007, you can get Orca - version 3.1.4000.2049 here. http://www.thomaskoetzing.de/index.php?option=com_docman&task=cat_view&gid=67&Itemid=159
-
@andregcasal, K-lite will install to where you select but if you select F:\ drive your drives will need to be mapped out correctly. I would just install to C:\Program Files\K-Lite Codec Pack
-
a sample autounattend.xml - working good
urie replied to prathapml's topic in Unattended Windows Vista/Server 2008
it is WSIM that has added the keyValue="cd7c395" i try to use full paths to drivers i,e, - <DriverPaths> - <PathAndCredentials wcm:action="add" wcm:keyValue="1"> <Path>G:\sources\pnpDrivers\1</Path> </PathAndCredentials> - <PathAndCredentials wcm:action="add" wcm:keyValue="2"> <Path>G:\sources\pnpDrivers\2</Path> </PathAndCredentials> </DriverPaths> G:\ is DVD drive but this can vary obviously from different systems -
@MGadAllah look at the autoit script it lets you select what things you want to install.
-
Use <DiskConfiguration> <WillShowUI>Always</WillShowUI>
-
this is not a registry file this is the licence file it makes when registered you must copy this to C:\Program Files\Driver-Soft\DriverGenius when installing driver genius if you want it registered here is what i have in runonce addapt to suit your own needs REG ADD %KEY%\1001 /VE /D "Driver Genius Professional 2006 6.1.2518" /f REG ADD %KEY%\1001 /V 101 /D "C:\APPS\DriverGeniusPro\DrvgenPro.EXE /SILENT /SP- /NORESTART" /f REG ADD %KEY%\1001 /V 102 /D "CMD /C COPY \"C:\APPS\DriverGeniusPro\Register.key\" \"%ProgramFiles%\Driver-Soft\DriverGenius\" /Y" /f REG ADD %KEY%\1001 /V 103 /D "CMD /C COPY \"C:\APPS\DriverGeniusPro\Drivers.dat\" \"%ProgramFiles%\Driver-Soft\DriverGenius\" /Y" /f P.S. i copy Drivers.dat file also so it is up to date
-
Like yourselfe i would use nero7 if i could add nero vision express to it.