cybpsych

Realtek HD Audio CODECs R1.20 (05/04/2005, 5.10.0.5125) Page: http://www.realtek.com.tw/downloads/dlhd-2...0Audio%20CODECs

Hi BTS! Tried your DriverPacks this morning, installation went smoothly on my Asus P5AD2, albeit the slow setup -> lots of drivers to extract Anyway, I'm curious of whether the packs is compatible with RyanVM's Update Pack in the future? For example, i installed DriverPacks *after* RVM Update Pack. So, what if there's a *new* RVM pack? Will the current DriverPack installation messes up with RVM's newer packs? Thanks for your packs!

SiS900 LAN Driver v1.18 (11/05/2004, 2.0.1039.1180) SiS190 Gigabit LAN & SiS191 LAN Driver v1.03b (02/18/2005, 2.0.1039.1030) Page: http://www.sis.com/download/

SiS163 Wireless LAN Driver v1.03 (02/24/2005, 5.1.1039.1030) Page: http://www.sis.com/download/

SiS UniVGA3 Graphics Driver v3.67 Page: http://www.sis.com/download/

ITE IT8212F v1.7.2.0 Page: http://www.ite.com.tw/software_download/software_download2.asp

*EDITED* ok, found out the differences in version: Old, V1 Update: New, V2 Update:

;Remove the Malicious Software Removal Tool v1.4 from WU (KB890830) [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RemovalTools\MRT] "Version"="08112F4F-11BF-4129-A90A-9C8DD0104005"

Uploaded the update pack: :: KB890830 v1.3 (April 2005) :: KB893086 :: KB893066 :: KB890923 :: KB890859 :: KB893803 (Windows Installer 3.1) http://s6.yousendit.com/d.aspx?id=0H0Z2W3XXA7H3CW394EDOC8C1

;Remove the Malicious Software Removal Tool v1.3 from WU (KB890830) [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\RemovalTools\MRT] "Version"="D89EBFD1-262C-4990-9927-5185FED1F261"

first, i've been enjoying making 7Z Switchless Installers! Thanks to 'keytotime' for posting the guide here and at MSFN.org. Kudos! second, is there a special switch for installers packed by InstallShield? the reason i'm asking this because all of my 7Z Installers having its temporary files deleted before the installation is completed. i've followed exactly of the steps listed here, compressing went well, packing went well ... however, when i tried to execute the 7Z installers, the extracted temp files in the TEMP folder will be deleted just about 3-4 seconds after loading the InstallShield Installer. I peeked the TEMP folder just to see what's wrong. During 7Z extraction, the files were extracted fully. But, after 3-4 secs, most of the files are deleted, leaving just some IS files (which were used to load the IS Installer). any1 experiencing this? p/s: thinking of it, this scenario also happens when i use PackageForTheWeb to pack. the files will just *disappear*.

this installation of Installshield packaged is making me nuts after extraction, the temp files in the Temp folder will be removed after 3-4 secs. I've added this: ;!@Install@!UTF-8! RunProgram="setup.exe /SMS" ;!@InstallEnd@! ... and it's still being deleted off the Temp folder, making it near-impossible to finish the setup ... the only way to continue is to immediate pressing Next button so that the installation can be finished

thanx ryan, actually i'm targetting to install these switchless installers on Windows 98SE system ... these installers contain some USB mass storage device drivers which only requires Windows 98SE looking at the drivers' size floating around 4-5MB, i planned to do this switchless installers in order to reduce the package size ... but, i noticed that the only large files for the drivers are these 2 MS Installers ...

Hi! I'm darn sure that these files are not needed (assuming that it has been installed): :: instmsia.exe :: instmsiw.exe Any1 can comfirm whether I should leave this from the archive? If I archive all, execute the .MSI in config.txt, but the system don't have MS Installer installed, will the 7-zip switchless installer work? My theory is that if this doesn't work, i might as well call the setup.exe from config.txt so that it will install MS Installer if non detected in the system. The folder in question contain:

Well, as to all companies, M*O*N*E*Y is the one thing they can only think!

Ok ... this is very embarassing Here's what i did: :: Install Root Cert. Update --> AR603 won't install :: Install other updates except IE6 SP1 --> AR603 won't install :: Install IE6 SP1 --> AR603 won't install :: Extract AR603 and ran the MSI file --> Operating system not supported! Immediately i checked the version and found out Windows 98 ONLY!! I should've done OS checking that first! Windows 98 and 98SE looks the same. Lesson learnt: Check the exact OS version before doing anything else! Note: I can't upgrade this since it's in my office, so i'll just let our MIS to deal with the upgrade

thanks ryan, i was about to do the extraction too gonna check this Root Cert. Update <grrr> thx again!

ryan, need ur help here ... sorry to trouble you ... it's about Acrobat Reader v6.0.3 Switchless Installer ... I tried to install this nice repacked app on my other Windows 98SE system ... the extraction went fine, and managed to start the MSI ... after a short initialization, it suddenly exit without installing .... is there something 'else' needed? last time, when i use the 'older' 6.0.3 installer from ur site, it went fine ... but this 'newer' 6.0.3 installer didn't work on Win98SE system ... I've tried on 2 systems, still exit abnormally ... any ideas?

- removed -

FYI, Microsoft released a patch for WMP10: KB891122: Update for Windows Media Digital Rights Management-enabled players http://support.microsoft.com/default.aspx?scid=kb;en-us;891122 my guess this, this is the patch of fix the DRM bug which was cracked recently. on other note, MS also updated its WMP10 to 10.0 Build 3802. this maybe the repacked for WMP10 to include KB891122 fix. any1 figured out these?

1 more update that you missed under Critical Updates: For XP SP2 with .NET 1.1 SP1 ... KB886903 -› Security Update for Microsoft .NET Framework, Version 1.1 Service Pack 1 Info -› 1.5 MB (February 8, 2005) I'm abit confused of this download page, typical MS when releasing updates. there are few more updates, depending on the .NET flavours. Use this page to get the appropriate links: :: http://www.microsoft.com/technet/security/...n/ms05-004.mspx

well, thanks for this tool ... 1st: the Visual Effect applied successfully ... 2nd: the menu is in reverse-3D (flat) ??? 3rd: how to auto restart XP after first boot? i have used shutdown.exe but it was overwritten by something ....

win98se doesn't support unattended setup ... best bet is to store all the relevant drivers into the CD itself but, this mean that the CD will always get obsolete with new drivers are out ...

OK, here's something that really bothers me -=> Turning off Common Task Bar (left side column in Explorer. It has been listed in the attached file, but it doesn't seem to turn it off ... using regshot/regsnap, i've found two keys that govern the on/off state of thi Common Task Bar ... whereas to enable it: When applied to uA, it the registry file will run, BUT wouldn't applied. however, if i manually apply this tweak and reboot, the Common Task Bar would be off. so, any1 knows how to really turn if OFF during uA session?

i'll try it on my VMware now *UPDATE* Wallpaper not applied.