February 21, 200719 yr My Fan seems to be dieing, any body have any ideas on a replacement fan?Id prefer if it was a simple Fan swap, I don't want to rip all the heatsink off as i have no issues with the temp.It is a Leadtek versionas can be seen herehttp://www.xbitlabs.com/articles/video/dis...leadtek68u.htmlhttp://www.xbitlabs.com/misc/picture/?src=..._800.jpg&1=the fan is under the grill on the topit has a triangle screw pattern (3 screws forming a triangle)thanksMentalindustries
February 21, 200719 yr Author Cool thanks,how does it work?Do I have to remove all the casing then bolt it on top, if so id prefer just a fan swapout replacement
February 21, 200719 yr well for just a fan replacement you would have to contact the manufacturer of the heatsink...i would highly suggest what i posted there. yes, you will have to remove your entire heatskink and put this one on...
February 21, 200719 yr If it's failing already, it must not be a ball bearing fan, which last a very long time with great reliability. But they make a little big more noise.
February 22, 200719 yr if its not the fan then its the power connector... or he just has a faulty fan... it happens.
February 22, 200719 yr Its the fan for sure makes one hell of a grinding/ humming noiseThen you'll be wanting to get a Silencer compatible with your video card. I have the same one that Ripken linked to. Visit my blog page here (might display strange in IE, use Firefox or Opera) to view a step by step installation. It's extremely easy and fun. The fan offers much better heat absorption and dissipation out the rear of your case as opposed to simply blowing down on the GPU or away from it, causing the warm air to further ventilate throughout your case. Edited February 22, 200719 yr by Jeremy
February 22, 200719 yr jeremy- that silencer is compatible with his card and both of our cards. dont you love it
February 22, 200719 yr Author Thanks GuysI have found someone who lives close to me with a dead 6800GT http://img89.imageshack.us/img89/5564/3483712te8.jpgSo I am going to grab his fan tomorrowThanks for your effort guys
February 24, 200719 yr Thanks GuysI have found someone who lives close to me with a dead 6800GT http://img89.imageshack.us/img89/5564/3483712te8.jpgSo I am going to grab his fan tomorrowThanks for your effort guysUnless you're in a Ultra Clean Computer Room, those little fans need to be taken out and thoroughly cleaned about once a year or oftener.Little known fact: the fans can also be relubricated by using a very small syringe to inject one drop of high quality machine oil through the seal on the bottom of the fan and into the bearing cavity.I've kept my fans running for years that way....long after the factory lubrication was used up.Takes a few minutes of your time, but it's sure a lot cheaper than buying new fans, if you can find them.Good Luck,
February 26, 200719 yr Little known fact: the fans can also be relubricated by using a very small syringe to inject one drop of high quality machine oil through the seal on the bottom of the fan and into the bearing cavity.I've kept my fans running for years that way....long after the factory lubrication was used up.Thanks for that! Great to know.
March 1, 200719 yr Author Well after about a week my card is all assembled again.Was a major effort had to take the heat sink off anyway.put some Arctic ceramique on the core and memory while i was about it.if only i knew to put some oil in
March 1, 200719 yr You can peel of the sticker and use some machine-oil on the centre, wait some time and test the fan out again.
Create an account or sign in to comment