ethanmcf Posted January 3, 2007 Share Posted January 3, 2007 Hi, i know this is posted all over the MSFN Forum and the UACD Guide,but it just will not work, at allI Just wunt a simple explination of how to install all my programs via the GUIRUNONCE or BATCH command,i have put my installer files into the corrent folder,and ive edited my winnt.sif file, and ive checked the batch files work, but after setup finished it says it cant find the .exe or .msi file to installand its really making me pull my hair out, ive wasted soo many cds and dvds, (because VMWare is too slow ) lolPlase Help,Thank youEthan.Complete id*** with Silent Installes Link to comment Share on other sites More sharing options...
gunsmokingman Posted January 3, 2007 Share Posted January 3, 2007 (edited) Hi, i know this is posted all over the MSFN Forum and the UACD Guide,but it just will not work, at allI Just wunt a simple explination of how to install all my programs via the GUIRUNONCE or BATCH command,i have put my installer files into the corrent folder,and ive edited my winnt.sif file, and ive checked the batch files work, but after setup finished it says it cant find the .exe or .msi file to installand its really making me pull my hair out, ive wasted soo many cds and dvds, (because VMWare is too slow ) lolPlase Help,Thank youEthan.Complete id*** with Silent Installes Wait Ill look in to my magic mittor to read your batch files so I can see where the problems is.Ops I just broke my magic mirror could you post your code of what you have done. Then you may geta resonable reply to your question. Edited January 3, 2007 by gunsmokingman Link to comment Share on other sites More sharing options...
ethanmcf Posted January 3, 2007 Author Share Posted January 3, 2007 Hello, yesh sorry about that, ill post my winnt.sif and my batch file along with the location This is my Batch to install VNC@ECHO OFFECHO.ECHO Installing TightVNC 1.2.9ECHO Please wait...start /wait %systemdrive%\install\VNC\vnc.exe /sp- /verysilentEXITMy Winnt.sif File[Data]AutoPartition=0MsDosInitiated="0"UnattendedInstall="Yes"[Unattended]UnattendMode=FullUnattendedOemSkipEula=YesOemPreinstall=YesTargetPath=\WINDOWSFileSystem=*UnattendSwitch="yes"WaitForReboot="No"DriverSigningPolicy=IgnoreKeyboardLayout="United Kingdom"[GuiUnattended]AdminPassword=EncryptedAdminPassword=NoOEMSkipRegional=1TimeZone=85OemSkipWelcome=1[UserData]ProductKey="XXXXX-XXXXX-XXXXX-XXX-XXXXX"FullName="Ethan McFenton"OrgName="Personal Installation"[Display]BitsPerPel=32Xresolution=1280YResolution=1024Vrefresh=85[TapiLocation]CountryCode=44Dialing=ToneAreaCode=01792[RegionalSettings]LanguageGroup=1Language=00000809[Identification]JoinWorkgroup=WORKGROUP[Networking]InstallDefaultComponents=Yes[Branding]BrandIEUsingUnattended=Yes[URL]Home_Page=http://toi.ulmb.com[IEPopupBlocker] BlockPopups=YesFilterLevel=HighShowInformationBar=No[WindowsFirewall]Profiles = WindowsFirewall.TurnOffFirewall[WindowsFirewall.TurnOffFirewall]Mode = 0[Components]msmsgs=offmsnexplr=off freecell=offhearts=offminesweeper=offpinball=offsolitaire=offspider=offzonegames=off[Shell]DefaultStartPanelOff = YesDefaultThemesOff = Yes[GuiRunOnce]Command0="%windir%\source.bat"Command1="%systemdrive%\vnc.bat"Command2="%Systemdrive%\msn.bat"My Winnt.sif file is in the I386 Folderand the batch file along with one to copy the source and to install MSN are located in XPCD\$OEM$\and the actual programs are in XPCD\$OEM$\install\*appnamegoeshere*Thanks Hope i have posted this right Link to comment Share on other sites More sharing options...
Yzöwl Posted January 3, 2007 Share Posted January 3, 2007 As far as I'm aware you cannot use environment variables in that locationChange[GuiRunOnce]Command0="%windir%\source.bat"Command1="%systemdrive%\vnc.bat"Command2="%Systemdrive%\msn.bat"to[GuiRunOnce]Command0="C:\WINDOWS\source.bat"Command1="C:\vnc.bat"Command2="C:\msn.bat"Also in order for these locations to be correct:Put source.bat into \$OEM$\$$Put vnc.bat into \$OEM$\$1Put msn.bat into \$OEM$\$1Put \install\*appnamegoeshere* into \$OEM$\$1Please re-read this page for verification. Link to comment Share on other sites More sharing options...
ethanmcf Posted January 4, 2007 Author Share Posted January 4, 2007 Hellothat is a great help, i shall give it ago and report back to you,once again thanks, This has been bugging me for ages. Becuase it launch the commands, just cannot find the files Thank youEthan Link to comment Share on other sites More sharing options...
ethanmcf Posted January 4, 2007 Author Share Posted January 4, 2007 Hey, as im here, i might aswell ask, its bassed on the Winnt.sif file again, what do i add to the winnt.sif file to make it automatically format the C Drive with NTFS Quick.Thanks alot Link to comment Share on other sites More sharing options...
bledd Posted January 4, 2007 Share Posted January 4, 2007 (edited) here you go, fellow welshman http://www.msfn.org/board/index.php?showtopic=84617&hl=i'd be careful with it, if you've got a usb drive or 2nd hard drive in especially!if you've not used it, give nlite a whirl Edited January 4, 2007 by bledd Link to comment Share on other sites More sharing options...
ethanmcf Posted January 4, 2007 Author Share Posted January 4, 2007 Thanks for your Replywell ive used NLite, but again im getting errors, because ive got a 500Gb IDE Internal and 500Gb USB IDE External,and i CANNOT lose the data off the external Driveit is sooo important lol So can i just add say 2 lines of text to the actual winnt.sifif so can you you please post it in here Thanks alotEthan. Link to comment Share on other sites More sharing options...
bledd Posted January 4, 2007 Share Posted January 4, 2007 personally a never put an autoformat in my winnt.sif, i'd cry if i formatted the wrong drive Link to comment Share on other sites More sharing options...
ethanmcf Posted January 4, 2007 Author Share Posted January 4, 2007 Its mainly for OEM use, becuase im a System Builder in my local area, and its easy to make it auto format and then give the client the disc, and get them to buy a licence for it.Or should i simly install it, as noramal forfigure it, run sysprep,then Turn the machine off, and User NORTON GHOST to image the drivebut then how would i make it bootable, from a Norton Ghost ImageThanks lolEthan. Link to comment Share on other sites More sharing options...
jaclaz Posted January 4, 2007 Share Posted January 4, 2007 Its mainly for OEM use, becuase im a System Builder in my local area, and its easy to make it auto format and then give the client the disc, and get them to buy a licence for it.Pardon me, but I cannot understand the above, could you better explain the kind of License Reselling Agreement you have with MS as a System Builder?jaclaz Link to comment Share on other sites More sharing options...
ethanmcf Posted January 4, 2007 Author Share Posted January 4, 2007 I've got Volume Licence CD, direct from Microsoft, as i am a Microsoft partner, and then if i require a licence, i contact MS, and they will send me a new key, to which i sell the the Client, for just more than the price i paid for itHope this is more Clear, Link to comment Share on other sites More sharing options...
jaclaz Posted January 4, 2007 Share Posted January 4, 2007 I've got Volume Licence CD, direct from Microsoft, as i am a Microsoft partner, and then if i require a licence, i contact MS, and they will send me a new key, to which i sell the the Client, for just more than the price i paid for itHope this is more Clear, Well, it is more clear, though unfortunately not completely (to me).What the Client gets is a OEM license for a pre-installed OS bundled to the hardware you sell him, right? And as a favour (or added value) you make the backup copy of the install on CD?I thought that the above applied only to very large OEM's, and that smaller ones could only distribute "standard" Microsoft OEM licenses complete with CD and Certificate of Authority.I'll have to make some research on what is the minimum number of sales per year to apply for the type of agreement you have, I always thought that it had to be in the 4/5 figures range , haven't you got some link?jaclaz Link to comment Share on other sites More sharing options...
ethanmcf Posted January 4, 2007 Author Share Posted January 4, 2007 No i havnt got a link sorry, ive contacted Microsoft About it, and its legal, so ive been told, so thy get the Origianl OEM CD, and then use SySPrep to Copy the image with the Software they chose, again with their own License. So they can simply boot the Norton Ghost Image, ans restor the PC back to the way it was when first installed, like you say, the way big firms do, and just for Reference i sell about 10 Licences per week Link to comment Share on other sites More sharing options...
jaclaz Posted January 4, 2007 Share Posted January 4, 2007 Well, 10 licenses per week means some 400÷520 sales per year, that explains a lot.Though really your last post actually confused my ideas, sorry if I appear a bit "thick" (I probably am, ), but I still fail to see the general procedure, do you have also an agreement with Symantec for Norton Ghost and bundle it ?jaclaz Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now