3aces Posted October 5, 2006 Posted October 5, 2006 well i have had my HTPC setup for a while now...i feel it needs changes...so 1st on the list is a new power supply...fanless to be exact..now i read alot of reviews on this and it seems the best out there for what i rquire...now the question is....is there anything better out there
ripken204 Posted October 6, 2006 Posted October 6, 2006 the antec phantomhttp://www.newegg.com/Product/Product.asp?...N82E16817103926
3aces Posted October 6, 2006 Author Posted October 6, 2006 seems good....i prefer the Mahnum..becase of the option to only use the power leads neccessary......Antec..has many good reviews...but a few say it creates a high pitch noise...one review on new egg says that as well..and a couple of Znet
LLXX Posted October 8, 2006 Posted October 8, 2006 Be careful of fanless PSUs. Most of them can indeed work fanless at low output wattages, but going anywhere near their rated output may cause them to overheat. Fanless ones tend to run hotter also...
3aces Posted October 10, 2006 Author Posted October 10, 2006 Be careful of fanless PSUs. Most of them can indeed work fanless at low output wattages, but going anywhere near their rated output may cause them to overheat. Fanless ones tend to run hotter also...well im omly pwering my semprom3000 and DVD rewriter SATA2 hardrive..maybe 6600gt if i get it in there...so it shouldnt really need all the power....but a new case is nesseccary....any recomendations.....im looking for something spacous on the inside..but compact...no neons and glows and rubbish like that....
KamiQuazi Posted October 10, 2006 Posted October 10, 2006 I have an Antec P180, its big but the size for me helps to keep the sound at a minamual... http://www.newegg.com/Product/Product.asp?...N82E16811129154Shouldn't have a problem installing the power supply...
3aces Posted October 11, 2006 Author Posted October 11, 2006 (edited) I have an Antec P180, its big but the size for me helps to keep the sound at a minamual... http://www.newegg.com/Product/Product.asp?...N82E16811129154Shouldn't have a problem installing the power supply...thats nice....any other ideas??also....the power supply unit..sits on the bottom...how do i know..the connectors are gonna be long enough :S Edited October 11, 2006 by 3aces
puntoMX Posted October 11, 2006 Posted October 11, 2006 Look at this .Others on MSFN have the Antec but the door is a bit thin, the Coolermaster doesn´t have a door and is totaly open, link to the CM Stacker series.
3aces Posted October 11, 2006 Author Posted October 11, 2006 Look at this .Others on MSFN have the Antec but the door is a bit thin, the Coolermaster doesn´t have a door and is totaly open, link to the CM Stacker series.CM Stacker too big....Antec dont seem to bad...depends what your gonna do with it...my uATX board goin in it...and its goin on sit in a cupboard in my room...thats it...so that does matter....im worried about the power supply though...people have said to be carefull of the wires.....now if i spend about 170£ on a new case and power supply and it doesnt fit im gonna go mad....
ripken204 Posted October 11, 2006 Posted October 11, 2006 the p180 is a godly case as long as you're willing to spend 10 hours on cable management
KamiQuazi Posted October 12, 2006 Posted October 12, 2006 the p180 is a godly case as long as you're willing to spend 10 hours on cable management Godly yes, maybe not ten hours but do it as you go along. @3aces:I'm having no problem with getting the connectors to the right place. The 12v, for my motherboard is at the top and it connects just fine and I have a Ultra X-Connect 500w, so I think there shouldn't be much of a problem.
3aces Posted October 12, 2006 Author Posted October 12, 2006 the p180 is a godly case as long as you're willing to spend 10 hours on cable management Godly yes, maybe not ten hours but do it as you go along. @3aces:I'm having no problem with getting the connectors to the right place. The 12v, for my motherboard is at the top and it connects just fine and I have a Ultra X-Connect 500w, so I think there shouldn't be much of a problem.excellent..cheers...ill wait another couple of days for any more suggestions then ill take the dive!!
3aces Posted October 13, 2006 Author Posted October 13, 2006 just i hope it wouldnt happen, i found something very interestingNesteq Semi-Fanless ASM PSU, 450Wnow this power supply looks and performs amazingly.....but it outragesly prices....cheapest i found it was £100 inc VATcan anyone find me any other information on this i have been googling this for the last hour and a half
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now