How can i setup my PC as a Duplicator

[ideas]

is there a way i can build my PC to work as a duplicator and what softwares & parts would i need?

what i want it to do is make 3 copies of 1 DVD simultaneously

NOW!! Build your own CD changer

http://www.sentex.net/~mwandel/tech/changer.html

Edited September 13, 2006 by ideas

[LLXX]

Three DVD burners. Those and one hard drive will fully fill a standard ATX mobo with 2 IDE channels.

Nero had an option to use multiple recorders since a long time ago.

...and there is no need to make duplicate threads, even though they are about duplication!

Edited August 27, 2006 by LLXX

[ideas]

THANKS MAN CAZ I WAS JUST LOOKING AT SOM dvd dUPLICATOR CONTROLLER PRICES

Also will this burn the single DVD original to 3 DVD blanks within 15 mins or less?

[puntoMX]

Yes it will burn 3 DVDs in 15 mins if your system is not a Pentium 3 or so .

[gamehead200]

Or you can just buy a DVD replicator/label printer, and just tell it how many copies you want, leave, come back, and it's all done... My school has one. Going to need to make 100+ copies of a DVD full of pictures from last year very soon...

[puntoMX]

Or just get the "Brain unit" as they also call it. or buy a complete tower with 11 DVD burners in it

Check it out!

EDIT: I think that gamehead200 is pointing at a thing like this.

Edited August 28, 2006 by puntoMX

[gamehead200]

Or just get the "Brain unit" as they also call it. or buy a complete tower with 11 DVD burners in it

Check it out!

EDIT: I think that gamehead200 is pointing at a thing like this.

Yeah, exactly that... But I've seen way cheaper ones...

[ideas]

I recently purchased a 1 to 3 dvd duplicator controller for my pc and now I can't seem to figure out how to connect my dvd+rw drives to the controller via ide cables and to the motherboard at the same time.I would like to use the drives as I would normally use them from my PC or Windows,but would also like to be able to use the duplcator when I need it.

...Any help out there?

[puntoMX]

Not posible, never saw that model before...

[ripken204]

I recently purchased a 1 to 3 dvd duplicator controller for my pc and now I can't seem to figure out how to connect my dvd+rw drives to the controller via ide cables and to the motherboard at the same time.I would like to use the drives as I would normally use them from my PC or Windows,but would also like to be able to use the duplcator when I need it.

...Any help out there?

do you have a link to a website for this controller? any guide for it?

[KamiQuazi]

I recently purchased a 1 to 3 dvd duplicator controller for my pc and now I can't seem to figure out how to connect my dvd+rw drives to the controller via ide cables and to the motherboard at the same time.I would like to use the drives as I would normally use them from my PC or Windows,but would also like to be able to use the duplcator when I need it.

...Any help out there?

do you have a link to a website for this controller? any guide for it?

I would like to see this as well... Sounds good

[ideas]

am gonna write a guide in how to build your own duplicating PC system

Edited September 2, 2006 by ideas

[ideas]

All u need

-Acard ARS 2030T 16X 1 to 3 target DVD CD Duplicator Controller

-Aluminum Case ( Aluminum loses heat faster than steel )

-3 Burn NEC ND-3550A DVD ± R / RW

-1 ROM ASUS DVD-E616 ( excellent for reading scratched disc )

-ACARD AEC-4420P USB Link Host CD DVD duplicator controller card ( Connects the your PC to the controller )

-Hard Drive - for storage (optional)

Edited September 5, 2006 by ideas

[ideas]

Remember guys that All these parts are all connected in 1 PC Case.

so here you have an all-in-one machine where u can use it as a standalone duplicator or as a PC combo duplicator and use these as external drives

Edited September 6, 2006 by ideas

[ideas]

A Controller - what it does is to support better readability on discs and lessen burn failures......

but wat i wud also would like to find out is a controller or some other addon that i can connect it to the PC and use these drives as internal drives.

Or to connect the controller directly to an IDE onto my motherboard and hav them interact as if a regular PC component

does anyone know of that or how to do it OR hav done this before???