PROBLEMCHYLD Posted November 17, 2011 Share Posted November 17, 2011 - usbser.sys 5.1.2600.5512 (from XP-SP3)Well, Drugwash, IMO what blorked your system was the .inf inside USB20DRV. Of course the files it contains are OK for your system, provided USBSTOR.INF is edited to load WDMSTUB.SYS with USBSTOR.SYS. Now, adding the untested (AFAIK) USBSER.SYS from XP SP3 didn't help any, either. Fact is, I tested it with WDMCHECK.EXE, and it turns out to have the same 3 unsatisfied dependencies that the USBSTOR.SYS (v. 5.0.2195.6773) from USB20DRV has. On the bright side it means it should work, provided it's also loaded with WDMSTUB.SYS, and this means finding the .inf that sets its registry entry and editing it too. The downside is it may be more than one .inf... USBSER.SYS is for the USB virtual serial port, which is mostly used to support USB modems, AFAIK. Here's a screenshot of WDMCHECK's output:What about USBSER.SYS SP1 or SP2? Link to comment Share on other sites More sharing options...
egrabrych Posted November 20, 2011 Share Posted November 20, 2011 (edited) NUSB 3.6 Polish language version is available at: https://www.sendspace.com/file/l3r6bw . Since the original English version also differs in that: - File Explorer.exe is version 4.72.3612.1710 (instead 4.72.3612.1700), derived from the "Unofficial Windows 98 SE 256 Colors Icons Explorer EXPLORER.EXE 4.72.3612.1710 Fix": http://www.mdgx.com/files/EXPL98PL.EXE ; - Files Hotplug.dll and Systray.exe are in version 4.10.2225 (instead of 04.10.2224), derived from the "Unofficial Windows 98 SE 256 Colors Tray Icon + + Warning HOTPLUG.DLL Systray.exe 10/04/2225 Fix" : http://www.mdgx.com/files/SYSPLGPL.EXE ; - Files User.exe and User32.dll are in version 4.10.2233 (instead of 10.04.2231), derived from the "Unofficial Windows 98 SE Animated Cursor (.ANI) + Icon Handling USER32.DLL + USER.EXE 4.10.2233 Security Vulnerability Fix" : http://www.mdgx.com/files/Q891711P.EXE . Because of these differences NUSB 3.6 Polish language version has a sign: "3.6a". Edited May 24, 2016 by egrabrych update link Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted December 20, 2011 Share Posted December 20, 2011 I bought a 8GB Mini Attaché USB 2.0 Flash Drive and it was not detected by NUSB.Here is a list of drivers that can probably addedhttp://www3.pny.com/support/support_landing_subcat.aspx?SectionID=1152&RootSectionID=1062&TypeID=5 Link to comment Share on other sites More sharing options...
dencorso Posted December 20, 2011 Share Posted December 20, 2011 No additional drivers are needed. Determine VID and PID (using USBVIEW or ChipGenius) and add them to USBSTOR.INF. But, with all due respect, that pendrive is the first one I hear NUSB did not detect... are you sure it's working? I have 12 pendrives and 3 external HDDs, plus four SDHC cards, two USB floppies and a SATA/IDE --> USB adapter, and NUSB detects them all correctly. Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted December 20, 2011 Share Posted December 20, 2011 (edited) No additional drivers are needed. Determine VID and PID (using USBVIEW or ChipGenius) and add them to USBSTOR.INF. But, with all due respect, that pendrive is the first one I hear NUSB did not detect... are you sure it's working? I have 12 pendrives and 3 external HDDs, plus four SDHC cards, two USB floppies and a SATA/IDE --> USB adapter, and NUSB detects them all correctly.I'm 110% positive that it did NOT detect on my Win98.Device Name: +[E:]+USB Mass Storage Device(PNY USB 2.0 FD USB Device)PnP Device ID: VID = 154B PID = 0059Serial Number: AABA158400001499Revision: 8192Device Type: Standard USB device - USB2.0 High-SpeedChip Vendor: (No match record)Chip Part-Number: (No match record)Product Vendor: PNYProduct Model: USB 2.0 FDTools on Web: (N/A)Device Descriptor:bcdUSB: 0x0200bDeviceClass: 0x00bDeviceSubClass: 0x00bDeviceProtocol: 0x00bMaxPacketSize0: 0x40 (64)idVendor: 0x154BidProduct: 0x0059bcdDevice: 0x8192iManufacturer: 0x010x0409: "PNY Technologies"iProduct: 0x020x0409: "USB 2.0 FD"iSerialNumber: 0x030x0409: "AABA158400001499"bNumConfigurations: 0x01ConnectionStatus: DeviceConnectedCurrent Config Value: 0x01Device Bus Speed: HighDevice Address: 0x01Open Pipes: 2Endpoint Descriptor:bEndpointAddress: 0x81 INTransfer Type: BulkwMaxPacketSize: 0x0200 (512)bInterval: 0xFFEndpoint Descriptor:bEndpointAddress: 0x02 OUTTransfer Type: BulkwMaxPacketSize: 0x0200 (512)bInterval: 0xFFConfiguration Descriptor:wTotalLength: 0x0020bNumInterfaces: 0x01bConfigurationValue: 0x01iConfiguration: 0x00bmAttributes: 0x80 (Bus Powered )MaxPower: 0x64 (200 Ma)Interface Descriptor:bInterfaceNumber: 0x00bAlternateSetting: 0x00bNumEndpoints: 0x02bInterfaceClass: 0x08bInterfaceSubClass: 0x06bInterfaceProtocol: 0x50iInterface: 0x00Endpoint Descriptor:bEndpointAddress: 0x81 INTransfer Type: BulkwMaxPacketSize: 0x0200 (512)bInterval: 0xFFEndpoint Descriptor:bEndpointAddress: 0x02 OUTTransfer Type: BulkwMaxPacketSize: 0x0200 (512)bInterval: 0xFF Edited December 20, 2011 by PROBLEMCHYLD Link to comment Share on other sites More sharing options...
dencorso Posted December 21, 2011 Share Posted December 21, 2011 PnP Device ID: VID = 154B PID = 0059Product Vendor: PNYProduct Model: USB 2.0 FDTry this. Let me know what happens.PS: by comparing this usbstor.inf with the one you have, you'll find out how it's done.usbstor.7z Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted December 21, 2011 Share Posted December 21, 2011 Try this. Let me know what happens.PS: by comparing this usbstor.inf with the one you have, you'll find out how it's done.Thanks but it don't work. The USB itself is 2.0 so it doesn't look in the USBSTOR.INF, it looks in the USB.INF or USB2.INF. Link to comment Share on other sites More sharing options...
dencorso Posted December 21, 2011 Share Posted December 21, 2011 That's not so. Even if it were USB 3.0 it would look into USBSTOR.INF, which defines storage devices not usb protocol.Does the pendrive work on XP or 2k? Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted December 21, 2011 Share Posted December 21, 2011 That's not so. Even if it were USB 3.0 it would look into USBSTOR.INF, which defines storage devices not usb protocol.Does the pendrive work on XP or 2k?yes Link to comment Share on other sites More sharing options...
dencorso Posted December 21, 2011 Share Posted December 21, 2011 Did you add a manufacturer driver to 98se already? If so, you've got to remove it (and that means finding which oemxx.inf it became) before redetectig it. Also it might be needed to hunt down its entry in the registry. Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted December 21, 2011 Share Posted December 21, 2011 Did you add a manufacturer driver to 98se already? If so, you've got to remove it (and that means finding which oemxx.inf it became) before redetectig it. Also it might be needed to hunt down its entry in the registry.The usb is cheap. I got it working though. I will never buy another PNY usb. I has to force it then jiggle it til it started to load. Link to comment Share on other sites More sharing options...
dencorso Posted December 21, 2011 Share Posted December 21, 2011 The usb is cheap. I got it working though. I will never buy another PNY usb. I has to force it then jiggle it til it started to load. Now you know why I use Corsair, OCZ or Patriot. It varies from year to year... Corsair was the best for many years, but Patriot is now the best, IMHO. OCZ had a really great one in the OCZ ATV Turbo (the yellow and black ones, which came in 4 GB or 8 GB sizes) but they don't make it anymore. The common, blue and orange OCZ ATVs still exist, but are not so good. But really great pendrives are quite expensive. All three above named manufacturers, plus SanDisk have some intermediate price pendrives for everyday use which are quite fine, though. I don't recommend any other manufacturer, but those four. Link to comment Share on other sites More sharing options...
PROBLEMCHYLD Posted December 21, 2011 Share Posted December 21, 2011 My next USB flash drives I buy will be 2 crucial 16GB Gizmo! Crucial is great, all my computers has their memory.Never had any problems with them. Link to comment Share on other sites More sharing options...
dencorso Posted December 22, 2011 Share Posted December 22, 2011 Regardless of the brand, consider the following: some manufacturers, in an effort to produce ever slimmer pendrives, decided to omit the armor (metal outer-casing) from some of their pendrive's connectors. The SONY Micro-Vault Tiny was one of the first such armorless pendrives. But... the armor is there for many reasons, one being that it helps hold snugly the connectors in both parts of the USB connection (the pendrive and the machine's USB connector), so that, by omitting it, the manufacturer created a less reliable product, that will give bad contact in any well used USB connector, forcing one to jiggle the pendrive to get contact. So, nowadays I avoid buying any armorless connectored pendrive. I like Corsairs a lot, but I do avoid the Flash Voyager Mini line because of this. Just my 2¢, of course. Link to comment Share on other sites More sharing options...
Monroe Posted December 22, 2011 Share Posted December 22, 2011 (edited) Appreciate the "flash drive" information, very interesting. Was doing some further searching on the subject of "rugged/tough" flash drives and came across this article dated March 28th, 2011 ... so it's fairly recent. The author tested flash drives with a 10 foot drop, hitting them with a hammer and putting them in water ... interesting article. dencorso, I was checking out the Patriot flash drive but I can only fine one listed with a plastic case, I was looking for a metal case but now I think I would like a rubberized metal case for extra shock protection and also moisture protection. Any suggestions on your part since you have tested many different makes of flash drives. I'm still checking out the drives you mentioned. Awhile back I ordered a cell phone battery from Hong Kong, he also had metal flash drives for sale so I bought a 2GB and really liked the feel of the thing, very solid.Roundup: Rugged Flash Drives From Corsair, Imation, Kingston and LaCiehttp://techcrunch.com/2011/03/28/roundup-rugged-flash-drives/Update if anyone might be interested, I decided to get a 16 GB Corsair Survivor flash drive. It is also USB 3.0 but my computers are only USB 2.0 so I can't take advantage of the faster speed. Made out of lightweight aircraft aluminum and waterproof to 200 meters.http://www.amazon.com/Corsair-Flash-Survivor-Drive-CMFSV3-16GB/dp/B005MHN6K2/ref=sr_1_1?ie=UTF8&qid=1325087496&sr=8-1... Edited December 28, 2011 by duffy98 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now