Jim624 Posted January 22, 2005 Share Posted January 22, 2005 Just got a Seagate 80GB hard drive......going to use it as an external drive. I connected it to my enclosure and it shows up in Device manager but does not show up on My Computer........what am I doing wrong.... I have other external drives that work just fine. Is there something about the jumpers I need to change ???Win XP Pro Link to comment Share on other sites More sharing options...
getwired Posted January 22, 2005 Share Posted January 22, 2005 Have you partitioned and formatted the drive? Go to Start | Run and run diskmgmt.msc. You should see the drive there. Partition and format it accordingly, and then it should appear in My Computer. Link to comment Share on other sites More sharing options...
firefoxthebomb Posted January 24, 2005 Share Posted January 24, 2005 Have you partitioned and formatted the drive? Go to Start | Run and run diskmgmt.msc. You should see the drive there. Partition and format it accordingly, and then it should appear in My Computer.it has to be this Link to comment Share on other sites More sharing options...
dirtwarrior Posted March 31, 2006 Share Posted March 31, 2006 Mine is not showing up anywhere. Not on my computer, not in device manager, and not in diskmgmt.msc.I am using a stripped down xp sp2. What should I try? The drive was prevously formatted.The jumper is set to master. Link to comment Share on other sites More sharing options...
IcemanND Posted March 31, 2006 Share Posted March 31, 2006 Check disk management first and make sure it is there, partitioned, formatted, and drive letters assigned.If it assigned a drive letter make sure you don't have a network drive mapped to the letter assigned to the drive. Windows will assign a physical drive a letter which is already assign to a network drive if without the network drive that letter would be the next letter to assign. Link to comment Share on other sites More sharing options...
spazmire11 Posted March 31, 2006 Share Posted March 31, 2006 if you have another pc try it on that id recomend see if its you or the drive.if its you i have no clue whats needed but atleast you know now.....if its the drive id try sticking it in a compy internaly and see if it works. Link to comment Share on other sites More sharing options...
dirtwarrior Posted March 31, 2006 Share Posted March 31, 2006 OK it works internally. In device manager it shows up as a generic usb device,I think what I need is a Generic XP usb Mass Strorage DriverI searched for on but couldnt find oneHelp Please Link to comment Share on other sites More sharing options...
phoenix_nf Posted May 15, 2006 Share Posted May 15, 2006 (edited) Same problem here. My Segate 250gigs External HD is not showing up. I am using Windows XP. I have an Asus Motherboard so i can't install SP2 heard that SPP2 and Asus are not compatible. When my friend installed SP2 on his PC (config similar to mine) his PC blacked out and would'nt boot.Editing this post to fill in the solutions i found to my problem posted above:1. My hard disk was bad. something wrong with the board. (Seagate does not cover that under the warranty all my cash down the drain )2. Installed the BIOS update software from the Asus CD, downloaded latest version of BIOS, and flashed BIOS. Now, SP2 installs fine without any problems. Edited June 5, 2006 by phoenix_nf Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now