Jump to content

how install the Windows ME on modern laptop?


Recommended Posts

Posted

how install the Windows ME on modern laptop?
i installed, but(on 1st boot):
1 - if the laptop reboot, we must use the patchmem, because we have more than 1GB's of RAM;
2 - now we get an error about protection... how can i fix it?


Posted

To install Windows ME on modern hardware, you'll need to do the following:

  • Use the emergency disk/boot ability to run the ram patch
  • Do the same with SATA drivers

I recall these are the two main components you will need to run Windows ME physically on a modern laptop. However, I have yet to find any laptops newer than the 915PM chipset that hold full driver support.

Posted
10 hours ago, Joaquim said:

error about protection

There are MANY protection errors possible in Windows 9x on modern hardware. It is far better to give exact message.

 

1 hour ago, FantasyAcquiesce said:

Do the same with SATA drivers

SATA on modern laptop? Are you joking?

Posted (edited)

correct me: if i update the Windows 98 SE to ME, i can lose the drivers?
there is a Windows ME installer with more drivers\updates?

my laptop is ACER Aspire 5630: https://www.driverscape.com/manufacturers/acer/laptops-desktops/aspire-5630/1366
like you see is for Windows XP... but i need install the Windows 98SE\ME...

i must re-try install it, the sound driver, again:
https://retrosystemsrevival.blogspot.com/2019/06/windows-31959898se-hda-driver.html

can i create a batch file for 'install' steps?

 

but how fix the Black Screen? it's a Graphic driver bug .... i installed the patch, but it's for ShutDown....
https://retrosystemsrevival.blogspot.com/2019/04/unofficial-nvidia-drivers-8269.html

i believe that the ERROR 'IOS protection' is about CPU speed... but i don't know.... i need a CPU patch for install it on MS-DOS.
message like these:
"While initializing device IOS: Windows protection error. You must restart your computer."
"While initializing IOS: Windows protection error. You need to restart your computer. "
"Windows protection error. You must restart your computer."
"Windows initializing device IOS: Windows protection error. IOS failed to Initialize, Please restart "
"Windows initializing device IOS: Windows protection error. You need to restart your computer."
"Windows protection error."
 

Edited by Joaquim
Posted

finally i get sound:
 

Quote

The instructions on Operating System Revival are correct for WinME only. In case of Win98SE use for manual installation (taken from Operating System Revival + corrections):

Instructions (Windows 95/98):
1. Download Watlers' driver HDADRV9J.zip
2. Place HDA2.DLL in C:\WINDOWS\System
3. Make sure HDATSR.EXE and WAVEOUT.EXE are accessible (place in "C:\WINDOWS" for convenience)
5. Add line "HDATSR.EXE" to AUTOEXEC.BAT (without quotes)
6. Add to SYSTEM.INI,[Drivers] "WAVEHDA=HDA2.DLL" (without quotes)
7. Reboot

If there is no sound, try my quasi-universal version of  HDAICOUT.HDA (found in DaveH's tread) and place in  C:\WINDOWS and reboot.

If there is sound but system is unstable try in SYSTEM.INI,
[Vcache]
MinFileCache=1024
MaxFileCache=1024
+ you can speed-up your system by adding line "SMARTDRV.EXE" to AUTOEXEC.BAT (without quotes). Always reboot in between.

from:

but:
1 - after several minutes i get audio(start windows audio);
2 - the explorer is in memory, but the desktop isn't showed :(

Posted

Joaquim is a patient one, for over four years trying to make his wholely incompatible laptop to work with Win9x.
I've asked him plenty time to buy a cheap USB Sound Card to fix audio issues...

We are Win9x experts, but we can't make laptops made later than approx ~2004 magically work with Win9x, that's why we prefer desktop PCs.

Posted (edited)

i'm sorry @pangoomis, but  true ;)
after several times, i get the audio... but  the OS seems very very slow and i can't see the desktop, even the Explorer been on memory... maybe the turtles win hehehehe

Edited by Joaquim
Posted
On 12/6/2024 at 6:42 PM, pangoomis said:

2004 magically work with Win9x, that's why we prefer desktop PCs

I run 98 SE on Acer Aspire V3-571G and HP 250 G7 (84A6). Without some functionality, of course, but OTOH without errors.

Posted

You know that by "magically work", I meant all drivers and all functionality :) (high quality built in HD Audio drivers, GPU based 3D acceleration, non-NDIS2 ethernet drivers, WiFi, Bluetooth, etc...)

"without errors" - Win9x is an error by itself, but that's getting more philosophical :) 

I wonder if OP actually has a valid reason to run 9x on his laptop, other than "just because", "for fun", or "I am bored".
 

Posted

1 st - is for nostalgy ;)
2 nd - "Joaquim is a patient one, for over four years trying to make his wholely incompatible laptop to work with Win9x." to be honest i was months trying programming Raycasting, on VB6, but i always was doing 1 mistake that i didn't knew :( after several months, with another updated  AI, i have seen my mistake without notice(i miss normalize the radians(the math trigonometry functions use radians and not angles) for work correctly) ... yes after several months hehehehehe

Posted

VB6 should work fine on Windows XP.

If still want to stick to Win9x, you can try SoftGPU on VirtualBox, or older version of VMware, or 86Box/PCem/DOSBox-X.
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...