@Dietmar

If you can load different ACPI table now, maybe try the DSDT modification you thought of earlier and see if it works?

https://msfn.org/board/topic/183464-compiling-acpi-v20-driver-for-windows-xp-sp3-and-windows-2003-sp2-x32x64/?do=findComment&comment=1259789

 

I wish Windows XP could be installed with ISO only. But after another year, I got tired. cant. It resists strongly

Maybe in the future it can be done with changes in ISO.

Edited February 17, 20242 yr by SEDANEH

@SEDANEH

With my xp.iso, that I send to you, you can burn a real CD and install XP SP3 via a real Sata CD-Rom drive

Dietmar

14 minutes ago, SEDANEH said:

Maybe in the future it can be done with changes in ISO.

That's what the optional patch integrator script is for.

or you can use dietmar's prepatched ISO.

@Damnation

The problem is, that even after I boot XP to full desktop in Acpi Multiprocessor mode on the HP 255 g6 with E2-9000e cpu,

because I have no keyboard and no mouse, it is impossible for me to install any driver.

The USB devices and most of the others are a little bit different on the HP and the Lenovo.

The only way to overcome this, would be to change by hand all the driver entries from Lenovo to those from HP.

But this would be like to write the DSDT and SSDTs new

Dietmar

22 minutes ago, Dietmar said:

@SEDANEH

With my xp.iso, that I send to you, you can burn a real CD and install XP SP3 via a real Sata CD-Rom drive

Dietmar

yes

by xp iso that you sending

i burned a cd and sata dvd drive but i see A5

after reset and booting cd  befor setup is star, i press F7 to skip acpi and i see 7B

@Dietmar

Not the lenovo DSDT table.

I meant just adding the missing ADR code for PRT4 into the HP laptops own DSDT table and see if it helps, that might resolve the 0xA5 0x0D BSOD you've been having.

@Damnation

I solved all acpi errors before.

The "only" error that stays is, that for some strange reasons no vga driver can be loaded in second boot phase. Also that one from VMware not.

It is a problem of the DSDT and SSDTs of the Bios from the HP, because with changed against the acpi tables from the Lenovo board

XP boots. But the hardware is different, especially the USB devices and so no keyboard and no mouse

Dietmar

@SEDANEH

When you have as boot device a Sata-harddisk, that is formatted with MBR

and correct settings in Bios for "Legacy" boot, CSM enabled, Security disabled,

my xp.iso works for your motherboard

Dietmar

Edited February 17, 20242 yr by Dietmar

@Dietmar

That's what I'm saying - add this code in to your HP DSDT table and then try and boot with it. leave out the lenovo tables.

https://msfn.org/board/topic/183464-compiling-acpi-v20-driver-for-windows-xp-sp3-and-windows-2003-sp2-x32x64/?do=findComment&comment=1259789

 

@Damnation

The problem is now only in the settings for the VGA device in the DSDT and SSDTs of the HP Bios

Dietmar

55 minutes ago, Dietmar said:

@SEDANEH

When you have as boot device a Sata-harddisk, that is formatted with MBR

and correct settings in Bios for "Legacy" boot, CSM enabled, Security disabled,

my xp.iso works for your motherboard

Dietmar

I received your Windows and flash booted it, but before showing the Windows installation menu, it stops and does not reach the installation stage, it does not give an error, but the keyboard is disabled.

I don't have a CD to try now, but I will try the CD later

i stoped this level

 

 

Edited February 17, 20242 yr by SEDANEH

@SEDANEH

The pic looks like you're installing on a HP laptop now?

Weren't you trying to install on an ASUS Z790 motherboard?

@Mov AX, 0xDEAD

Can the problem of XP Acpi-Multiprocesor with the HP 255 g6 Notebook happen,

because the Bios reserves 0 Kbyte of low memory

Dietmar

EDIT: I see, that this 0 KB message of low memory depends only on the grldr version.

 

Edited February 18, 20242 yr by Dietmar

4 hours ago, Damnation said:

@SEDANEH

The pic looks like you're installing on a HP laptop now?

Weren't you trying to install on an ASUS Z790 motherboard?

sorry  i send this picture from google

my mainbord is asus z790

I am trying to install Windows XP method