ruthan Posted December 23, 2018 Share Posted December 23, 2018 Hello, i managed to get installed XP on Z370 MB - https://www.gigabyte.com/Motherboard/Z370-AORUS-Gaming-7-rev-10#kf , but USB3 is PITA, only 1 Asmedia on board USB3.1 port are working. Intel USB3 is not supported. I tried VIA 8xx USB and other Asmedia PCI-E controllers, but both are not working some error code in Device manager.. Sorry im not in machine location, but is something like Code 10 or Code 12, device is not working, on part of driver is not working.. Controller worked with other machine and are working with Windows 7/10.. so problem are XP drivers.. Etron and Renesas arent available outside of US on Ebay with reasonable price, what you thing about Fresco FL1100 its not cheap - 20 bucks? Or is there some other good USB3 controller manufactor? 1 Link to comment Share on other sites More sharing options...
Destro Posted December 26, 2018 Share Posted December 26, 2018 I saw some cheap syba Renesas controllers on ebay for 14 dollars cannot be that expensive to ship that part. Link to comment Share on other sites More sharing options...
ruthan Posted December 26, 2018 Author Share Posted December 26, 2018 From US there is usually some taxes and other handling, papers etc.. so im trying to avoid it and shipping price is usually very high. Im not sure if it counts for 14 dollars item too.. Im in Europian Union. Would be Renesas better than Fresco? Link to comment Share on other sites More sharing options...
Destro Posted December 26, 2018 Share Posted December 26, 2018 I think any usb 3 controller that isn't buggy that works on XP is fine. I dont know anything about Fresco, but the Renesas chips were shipped on a lot of motherboards and I know even early Intel manufactured boards as I have one and Intel supplied drivers for XP. So there is that. Link to comment Share on other sites More sharing options...
mockingbird Posted December 30, 2018 Share Posted December 30, 2018 Asmedia controllers work fine in XP. Use Driver 1.16.32.1 Link to comment Share on other sites More sharing options...
ruthan Posted January 10, 2019 Author Share Posted January 10, 2019 (edited) Ok i have finnally time to XP on Z370, i can confirm that both on board and addition USB 3 (ASM 1142) + USB3 are working (unfortunally only 2 ports on card, as these are quite expensive for just additional USB port, i ordered cheaper version for testing), but i have problem with Renesas / Nec controller - code 10, im using 21.8.2012 driver / 3.0.23.0 version, i will upload details later, im in hurry.. I still have some system devices with Exclamation mark, it can be connected, but i will try some VIA 805/806 controller too - if you have some proven drivers pleas share them. Edited January 11, 2019 by ruthan Link to comment Share on other sites More sharing options...
Destro Posted January 11, 2019 Share Posted January 11, 2019 (edited) Try different driver version. Only proven driver version I have is the one for 1 of my motherboards from intel site. But i don't know what the differences are. with your chip vs mine. There are differnt versions. So u need to tell me what your hardware ID is. You shouldn't need to force install a driver for that card. There will be a proper driver for it. That might be your issue. look at this site whats the hardware ID of your card. The PCI\VEN # http://www.usb3-drivers.com/download-renesas-usb3-driver-for-WindowsXP-32bit.html Edited January 11, 2019 by Destro Link to comment Share on other sites More sharing options...
ruthan Posted January 11, 2019 Author Share Posted January 11, 2019 (edited) Ok there are details: - Error code:10 device is not possible to execute Here are pictures with IDs: https://www.dropbox.com/s/srviobuon6qn783/RenesasDriver.png?dl=0https://www.dropbox.com/s/bkwlz2h5l3t92ag/RenesasDriver2.png?dl=0 I made VIA 805/806 its working fine too, so problem is really only with this Renesas / NEC adapter. Edited January 11, 2019 by ruthan Link to comment Share on other sites More sharing options...
Destro Posted January 12, 2019 Share Posted January 12, 2019 (edited) I've found other versions of the driver that supposidly work on XP with that hardware ID. Older Version USB_3.0_WXP_3.0.16.0.ZIP https://www.helpjet.net/Fs-50248619-42463037-92206855.html http://lmgtfy.com/?q=PCI\VEN_1912%26DEV_0014%26REV_03 Edited January 12, 2019 by Destro Link to comment Share on other sites More sharing options...
LeXus6 Posted March 30, 2020 Share Posted March 30, 2020 Can you please tell me how you were able to get windows xp working on a z370 motherboard? I have been trying to for the past few days but yielded unsuccessful results. Link to comment Share on other sites More sharing options...
ruthan Posted March 30, 2020 Author Share Posted March 30, 2020 There is lots of reading: https://www.win-raid.com/t4035f45-Windows-XP-Bit-and-Server-Bit-on-Modern-Hardware.html But i did it before this thread even started. If want help write to that thread, when you are stuck. If install it with better mode that MPS Multiprocessor, you have to use nLite and make your own iso with acpi patches.. and Fernardo intel Sata drivers. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now