Bootable USB :-(

[EvilGoku]

Hello Greetings

am using XP pro SP3 My DVD ROM is not working any more SO installing the window from USB Using UltraISO Work fine But After Booting from USB i get error txtsetup.sif

This file Loction is K:\I386

Copy txtsetup.sif and Paste in K:\

again booting

No error txtsetup.sif

But find another Error like (??WINNT???)bootinfo.inf

possible to install from USB ?

Some Help

Thanks in Advance

Regards

[jaclaz]

@Evilgoku

There are several different ways to install XP from a USB (stick or hard disk).

None of them AFAIK require (or suggest) the use of UltraISO.

Why don' t you do like everyone else and just use either among WinsetupFromUSB:

http://www.msfn.org/board/topic/120444-how-to-install-windows-from-usb-winsetupfromusb-with-gui/

http://www.winsetupfromusb.com/

or Akeo's Rufus:

http://reboot.pro/topic/17902-rufus-v130-has-been-released/

http://rufus.akeo.ie/?locale=en_US

or any of the other methods/tools posted here:

http://www.msfn.org/board/forum/157-install-windows-from-usb/

as "sticky"?

I mean, sometimes re-inventing the wheel or hot water is a nice thing , but the reinvented wheel needs to be rounder and the reinvented hot water hotter.... .

jaclaz

[EvilGoku]

Thanks for Reply

WinSetupFromUSB 0.2.2

i have a CD Clone .img and .iso

i test it

See This

[EvilGoku]

Opps

downloading WinSetupFromUSB 1.4.exe (22 MB )

[EvilGoku]

Rufus 1.4.6 (578 KB) i used it but work fine until Window is starting and after a blue screen appear and a error appear

0x000000c8 0x00000?? , 0x00000??? these address appear what i do now ?

Until now try a WinSetupFromUSB 1.4

[jaclaz]

Well, the idea is that you:

1. choose one (and one only) among the programs
2. if it works, good
3. if it does not, report EXACT errors, COMPLETE description of what happens, etc., etc.
4. it is possible - mind you - that the error comes from your (modified/nlited extremely/non-original/whatever) source, or from an actual issue of the actual hardware

From your posts I cannot even understand if what is not working is Rufus or WinntsetupfromUSB

Try describing what EXACTLY you did and what EXACTLY you get (and please also some data bout the actual hardware you are using).

Sometimes even only writing down the steps performed is enough to understand which one causes the issue.

The 0X000000C8 BSOD is "not common", and usually is connected to *some* driver, what else can you read on the Blue Screen?

jaclaz

[EvilGoku]

Please accept my apology

I used Rufus 1.4.6

Rufus work fine But

In Insall ( press any key ... After Bios Loaded and Said

Window is now Starting ) after a while a blue screen Appear and show Error

This time i check the error if got any error i write an error on A page

and post it

Thanks

[EvilGoku]

looks like press any key then

"Setup is Loading Files" after Loading files

"Setup is Starting window"

after Blue screen error

Technical Information

*** Stop :0x0000007B (0xF7A54524 0xc0000034 0X00000000 0X00000000)

[jaclaz]

Technical Information

*** Stop :0x0000007B (0xF7A54524 0xc0000034 0X00000000 0X00000000)

Good (not that a BSOD is "good", but the 0x0000007b one is very common and it is usually easy to solve ).

The 0x0000007b mean "Inaccessible boot device" and it is normally caused by the install source missing the appropriate (nowadays SATA) Mass Storage device driver.

Another reason why you should post some details on the hardware .

You can either slipstream the appropriate driver in the source or use a "F6 floppy" for it.

Post details on the hardware and we will be able to provide you with further support.

BTW, this would be FAQ #3:

http://www.msfn.org/board/topic/116766-faqs/

jaclaz

[EvilGoku]

Ok Next time ( Whole Information ) (it's a pain writing a whole Data )

I spend Whole three days on that id*** USB AND rufus

Now My head is shaking like a baloon

I cann't explain my feeling :angrym:

I don't know My USB Wrong OR CD Clone ISO ? Which One ?

I change Harddisk nothing Happened Same error

jaclaz

installing window from usb Or CD

Which one is better Working ??

Thanks

[jaclaz]

If you are having a 0x0000007b it is likely that there will be no difference whatsoever between CD or USB (stick or disk).

The issue is more probably in the source files.

Since Rufus is only one among the several methods, it is also possible (but I doubt that) that *somehow* the same source files may work with another method/tool (like the mentioned WinSetupfromUSB).

IF the 0x0000007b is due to a SATA driver missing, you can change all the hard disks you want, but the SATA interface (for which a driver is missing) will remain the same (and continue to proiduce a 0x0000007b).

On the other hand - and it depends on the hardware, for which you did not provide NO data whatsoever - it is possible that the BIOS allows to set the storage subsystem as "IDE compatibility mode" (or similar), i.e. emulating a plain IDE/ATAPI interface for which the drivers are surely included in the (unmodified) XP source.

Whilst I am sorry for your suffering over these three days, I really cannot see what is so difficult (or painful) in posting some actual data, which is needed in order to hopefully try and help you.

I mean, I can install XP in - last time I counted them - 7 or 8 different ways, ALL succesfully, it's you that are having a problem, it is your problem (that I am trying to help you with, BTW for free).

Next time, read this:

http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/problem-report-standard-litany.html

attentively BEFORE asking for help and comply with it, I am getting tired of the "I'm ill, doctor. Help!" approach.

When (and if) you are ready, start a new thread, I am closing this one as it leads nowhere.

jaclaz

Edited April 15, 2014 by jaclaz