Jump to content

Nlite Errors Driving Me Crazy!

lapetite66

By lapetite66
in nLite

 Share

Recommended Posts

kali

kali

Posted
Posted (edited)

I think it is Ausologics cab problem. You didn't make it correctly. I also added Ausologics in my XP cd without problem. I use Auto IT script to make it. You can see try it.

Edited by kali
Link to comment
Share on other sites

lapetite66

lapetite66

Posted
  • Author
Posted

Sorry for not getting back to everyone sooner...

I made all the CABs with NLAOM.

Is it possible that during the making of one of those cabs, you mistakenly inverted something and place a file from (/reference to) diskdefrag ?

Hi Ponch:

I'm a confused about your question??? I know the word invert means to turn things inside... Do you mean did I make another CAB file and mistakenly add disk-defrag to that CAB or did I make a Auslogics-Disk-Defrag CAB and give it the wrong name??? I don't think so but will check... I checked and none of the CAB files I made recently had the auslogics files inserted.

In the meantime, the following are the steps I used when making the Auslogics disk defrag CAB.

1. I downloaded auslogics from www.majorgeeks.com

2. I pasted a copy of the file into the new folder(on desktop) that I made specifically for making CAB files.

3. I opened Nlite Addon Maker and went to where the file was located (new folder) and followed the necessary steps to make a CAB file

4. Pressed the make CAB button and then retrieved finished CAB file from "Output" folder (also made specifically for finished CABS).

I will say that my file wasn't a silent CAB meaning that I didn't put the /S or /SILENT on the line. I didn't do that because I did NOT want a silent CAB as the silent CAB would install the Ask Toolbar and I don't like toolbars other than the ones that come with the original web browsers. I know some will say that is the issue but as I mentioned before I have made an Auslogics Disk-Defrag CAB successfully in the past and it slipstreamed with no problems but for whatever reason this time around I keep getting that crazy error.

As you haven't ran nLite without any cab file, we are still not 100% sure that it comes from the cabs. Only 99%.

Run nLite with only half of your cab files and if still same problem, run it with only the other half. So we get to 100%, and you can investigate the "bad" half with Geej method above.

Ponch:

Your suggestion is to use nlite without slipstreaming CABs? I've done that already. I've slipstream SP3 and then One Piece's Post SP3 Pack before slipstreaming the CABs. The error only occurrs when I include the CABs. I've also done tried slipstreaming less CABs or a few CABs at a time and everything seems to be fine until that same error message pops up.

Hi Geej:

I don't think that I inverted anything but then again...never say never.

Is it possible that during the making of one of those cabs, you mistakenly inverted something and place a file from (/reference to) diskdefrag ?

I think this is the most probable cause of error.

@lapetite66, you can do the following to verify this.

Copy off svcpack.in_ from nlite slipstream process to some other location and expand the file to svcpack.inf

Then text search for 'auslogics disk-defrag' and see if it is in svcpack.inf

If it does, then one of your addon is causing the problem. It add an entry to svcpack.inf hence svcpack.inf is trying to run the program but is is not there.

I don't know how to exapand the svcpack.in_ from the nlite slipstream process.

Wait...I think I figured it out. I used 7z to extract the file or in this case a folder with a SVCPACK.INF file as mentioned by yourself. The following is the result.

[Version]

Signature="$Windows NT$"

MajorVersion=5

MinorVersion=1

BuildNumber=2600

[setupData]

CatalogSubDir="\i386\SVCPACK"

[ProductCatalogsToInstall]

BASECSP.CAT

D3DX9_24_X86.CAT

D3DX9_25_X86.CAT

D3DX9_26_X86.CAT

D3DX9_27_X86.CAT

D3DX9_28_X86.CAT

D3DX9_29_X86.CAT

D3DX9_30_X86.CAT

D3DX9_31_X86.CAT

D3DX9_32_X86.CAT

IE8.CAT

KB817688.CAT

KB889320-V2.CAT

KB897571.CAT

KB898461.CAT

KB915800-V4.CAT

KB916157-V6.CAT

KB922120-V6.CAT

KB927436-V2.CAT

KB932716-V2.CAT

KB933854.CAT

KB934401.CAT

KB940157.CAT

KB942288-V3.CAT

KB943232-V2.CAT

KB944043-V3.CAT

KB945060-V3.CAT

KB945184.CAT

KB945436.CAT

KB946648.CAT

KB947460-V3.CAT

KB948101-V3.CAT

KB948277.CAT

KB948698.CAT

KB948720.CAT

KB948877-V2.CAT

KB949127-V2.CAT

KB949900.CAT

KB950305-V2.CAT

KB950616.CAT

KB950820.CAT

KB950974.CAT

KB950982.CAT

KB951159.CAT

KB951163.CAT

KB951347.CAT

KB951376-V2.CAT

KB951531-V2.CAT

KB951618-V2.CAT

KB951624.CAT

KB951709.CAT

KB951822-V2.CAT

KB951978.CAT

KB952004.CAT

KB952011.CAT

KB952013.CAT

KB952069.CAT

KB952117-V2.CAT

KB952595-V3.CAT

KB952954.CAT

KB953024.CAT

KB953028.CAT

KB953155.CAT

KB953298.CAT

KB953761.CAT

KB953930.CAT

KB954155.CAT

KB954193.CAT

KB954232.CAT

KB954434.CAT

KB954708.CAT

KB954920-V2.CAT

KB955109.CAT

KB955356.CAT

KB955417.CAT

KB955567.CAT

KB955576.CAT

KB955704.CAT

KB955830-V2.CAT

KB955988.CAT

KB956048.CAT

KB956572.CAT

KB956844.CAT

KB957218.CAT

KB957495.CAT

KB957502.CAT

KB957931.CAT

KB958071.CAT

KB958149.CAT

KB958244.CAT

KB958644.CAT

KB958817.CAT

KB958910.CAT

KB959160.CAT

KB959267.CAT

KB959334.CAT

KB959426.CAT

KB959465.CAT

KB959554.CAT

KB959682.CAT

KB959765.CAT

KB959873.CAT

KB960071-V2.CAT

KB960519.CAT

KB960655.CAT

KB960680-V2.CAT

KB960859.CAT

KB960921.CAT

KB960970.CAT

KB961067.CAT

KB961118.CAT

KB961184.CAT

KB961187-V2.CAT

KB961451-V2.CAT

KB961503.CAT

KB961605.CAT

KB961742-V3.CAT

KB961853-V2.CAT

KB963038.CAT

KB963093.CAT

KB965220.CAT

KB967048-V2.CAT

KB967705-V2.CAT

KB968389.CAT

KB968585-V2.CAT

KB968764.CAT

KB968816.CAT

KB968930.CAT

KB969059.CAT

KB969084.CAT

KB969238.CAT

KB969262.CAT

KB969395.CAT

KB969557.CAT

KB969632.CAT

KB970048.CAT

KB970063.CAT

KB970254.CAT

KB970326.CAT

KB970401.CAT

KB970413.CAT

KB970430.CAT

KB970483.CAT

KB970553.CAT

KB970685.CAT

KB971029.CAT

KB971165.CAT

KB971234-V2.CAT

KB971276-V3.CAT

KB971314.CAT

KB971323.CAT

KB971345.CAT

KB971455.CAT

KB971657.CAT

KB972270.CAT

KB972422.CAT

KB972435.CAT

KB972878.CAT

KB973296.CAT

KB973442.CAT

KB973502.CAT

KB973507.CAT

KB973540.CAT

KB973624.CAT

KB973687.CAT

KB973815.CAT

KB973869.CAT

KB973904.CAT

KB974112.CAT

KB974266.CAT

KB974318.CAT

KB974392.CAT

KB974571.CAT

KB974905.CAT

KB975025.CAT

KB975467.CAT

KB975558.CAT

KB975560.CAT

KB975713.CAT

KB976002-V5.CAT

KB976323.CAT

KB977816.CAT

KB977914.CAT

KB978037.CAT

KB978338.CAT

KB978542.CAT

KB978601.CAT

KB978695.CAT

KB978706.CAT

KB978835.CAT

KB979309.CAT

KB979482.CAT

KB979687.CAT

KB980182-IE8.CAT

KB980302-IE8.CAT

KB981073-V3.CAT

KB981322.CAT

KB981669.CAT

KB981997.CAT

KB982132.CAT

KB982316.CAT

KB982665.CAT

KB2079403.CAT

KB2115168.CAT

KB2124261.CAT

KB2229593.CAT

KB2264107.CAT

KB2270406.CAT

KB2290570.CAT

KB2296011.CAT

KB2345886.CAT

KB2347290.CAT

KB2360937.CAT

KB2378111.CAT

KB2387149.CAT

KB2393802.CAT

KB2412687.CAT

KB2416451.CAT

KB2419632.CAT

KB2423089.CAT

KB2440591.CAT

KB2443105.CAT

KB2454533-V2.CAT

KB2467659.CAT

KB2476490.CAT

KB2478960.CAT

KB2478971.CAT

KB2479943.CAT

KB2483185.CAT

KB2483614.CAT

KB2485663.CAT

KB2491683.CAT

KB2492386.CAT

KB2498072.CAT

KB2507618.CAT

KB2508429.CAT

KB2509553.CAT

KB2510531-IE8.CAT

KB2535512.CAT

KB2536276-V2.CAT

KB2544521-IE8.CAT

KB2544893-V2.CAT

KB2564958.CAT

KB2566454.CAT

KB2570222.CAT

KB2570947.CAT

KB2584146.CAT

KB2584577.CAT

KB2585542.CAT

KB2592799.CAT

KB2598479.CAT

KB2598845-IE8.CAT

KB2603381.CAT

KB2618444-IE8.CAT

KB2618451.CAT

KB2619339.CAT

KB2620712.CAT

KB2624667.CAT

KB2629462.CAT

KB2631813.CAT

KB2632503-IE8.CAT

KB2633171.CAT

KB2633952.CAT

KB2639417.CAT

KB2641690.CAT

KB2646524.CAT

MSCOMPPACKV1.CAT

MSDRMV1.CAT

MSXML2-KB887606-ENU.CAT

MSXPSDRV.CAT

NETFX11.CAT

WGANOTIFY.CAT

WMFDIST11.CAT

WMP11.CAT

WSUS3SETUP.CAT

WUDF01009.CAT

XACT2_1_X86.CAT

XACT2_2_X86.CAT

XACT2_3_X86.CAT

XACT2_4_X86.CAT

XACT2_5_X86.CAT

XACT2_6_X86.CAT

XACT_X86.CAT

XINPUT1_1_X86.CAT

XINPUT1_2_X86.CAT

XINPUT9_1_0_X86.CAT

[setupHotfixesToRun]

Utorrent_v3.0_Non-Silent.exe

AdobeReader_v10.12_Non-Silent.exe

Shockwave_Full_v11.6.3.633_Non-Silent.exe

fpActivX.exe

fpPlugin.exe

AsfJoin_Silent.exe

[CatalogHeader]

; Customized by nLite - www.nliteos.com

As you can see there is no mention of auslogics disk-defrag unless it's invisible to the naked eye.

Just curious, why some addon are label non-slient? You mean you have to click on it to install?

More about$OEM$ folder info

regards

Yes, the ones labeled non-silent are the ones I have to click on to install. Yeah, that might defeat the purpose of a silent install but I set them up like that because I absolutely HATE toolbars and unfortunately auslogics and others prepackage their software with those crappy toolbars and sometimes even when you click "no" that you don't want the toolbars they still install, so installing those pieces of software silently wasn't something that I wanted to do. Then there are those apps that don't install silently like Spywareblaster. I tried the silent install and a box popped up and told me that the software doesn't support silent intalls so I went with the non-silent because I like the software.

I think it is Ausologics cab problem. You didn't make it correctly. I also added Ausologics in my XP cd without problem. I use Auto IT script to make it. You can see try it.

Hi Kali:

I don't know what the problem is but if you saw my swf file that I linked then you know that nlite said that the file was corrupt...even though the file itself wasn't there. I do know that when I got that corrupt file error for the first time I tried using universal extractor to extract the files but the error message I got said that the file was corrupt. I then downloaded a another file and still got the same message from Universal Extractor as well as the same error message from nlite when I attempted to slipstream the file.

I'm NOT an expert at making CABs but the only file that I am having trouble slipstreaming is the auslogics-disk-defrag so I don't think all the fault lies with me.

I don't know how to use Auto-IT. It took me forever to learn how to make CABs with NLAOM and frankly I just want to get this situation resolved and then in the near future maybe I'll learn how to use Auto-IT.

I understand you wanting to keep your AV running, but it is ALWAYS recommended to temporarily disable any AV program while using nLite, RVMi, or any integration/system building program. Besides, it should make the integration go quicker anyway. If you want to feel safer, do a complete scan of your system, disconnect any "extra" drives that are not needed during your build, disconnect from the internet, then disable all your AV programs before beginning your build. Immediately afterwards you can restart your AV, rescan your system just to be sure, then reconnect to the internet and hook back up any drives that you had disconnected. I know you've always kept the AV running before, but at this point in your trials, since you're "at a complete loss", it won't hurt to try it this way at least once. If nothing else you will have eliminated the problem that many of us think you have and you can say "I tried that and it didn't help".

Also, since you say you removed the problem CAB and didn't try to slipstream it, try Geej's suggestion:

Copy off svcpack.in_ from nlite slipstream process to some other location and expand the file to svcpack.inf

Then text search for 'auslogics disk-defrag' and see if it is in svcpack.inf

If it does, then one of your addon is causing the problem. It add an entry to svcpack.inf hence svcpack.inf is trying to run the program but is is not there.

Cheers and Regards

Hi bphlpt:

I will follow your suggestion about turning off my AV temporarily although that is something that I don't like doing. Once I have tried that I will let you and everyone else know how things turn out good or bad.

I tried Geej's suggestion you can see the results for yourself above.

Link to comment
Share on other sites
bphlpt

bphlpt

Posted
Posted
Your suggestion is to use nlite without slipstreaming CABs? I've done that already. I've slipstream SP3 and then One Piece's Post SP3 Pack before slipstreaming the CABs. The error only occurrs when I include the CABs. I've also done tried slipstreaming less CABs or a few CABs at a time and everything seems to be fine until that same error message pops up.

If I understand you correctly, if you don't include any CABs then the error does not occur. But if you include some of them it does? Does it matter which CABs you include? If you can narrow it down to a particular CAB, that's one thing. If it doesn't matter which CAB, if it does it if you include ANY CAB, then that's another. The first points to an error with the CAB. The second points to an error with how the CABs are added.

Cheers and Regards

Link to comment
Share on other sites
Geej

Geej

Posted
Posted

As bphlpt said, keep removing your cab files until no error occurs in nlite. Then you know which addon is causing this problem.

Nevertheless, just to point you to some links to silent program that you currently have as "non-silent"

Utorrent silent

AdobeReader_v10.12

Shockwave_Full + adobe_flash_activex + adobe_flash_plugin

K-Lite_CodecPack_Full_v8.32 (well, it's a maker tool)

MiniLyrics Well, indirectly itss WMP lyrics plugin

I could not find auslogics disk defrag. Maybe I can made one for you...inf type. Gonna take some time to make.

There is defragger as an alternative by the way.

Link to comment
Share on other sites
kali

kali

Posted
Posted

I don't know what the problem is but if you saw my swf file that I linked then you know that nlite said that the file was corrupt...even though the file itself wasn't there. I do know that when I got that corrupt file error for the first time I tried using universal extractor to extract the files but the error message I got said that the file was corrupt. I then downloaded a another file and still got the same message from Universal Extractor as well as the same error message from nlite when I attempted to slipstream the file.

I'm NOT an expert at making CABs but the only file that I am having trouble slipstreaming is the auslogics-disk-defrag so I don't think all the fault lies with me.

I don't know how to use Auto-IT. It took me forever to learn how to make CABs with NLAOM and frankly I just want to get this situation resolved and then in the near future maybe I'll learn how to use Auto-IT.

OK' date=' Thanks. I uploaded my Auslogics Disk Defrag for you.Download. I think, You make your XP customize newly again. Then add all the hotfixes you like. It will be better.

Link to comment
Share on other sites
lapetite66

lapetite66

Posted
  • Author
Posted

As bphlpt said, keep removing your cab files until no error occurs in nlite. Then you know which addon is causing this problem.

Nevertheless, just to point you to some links to silent program that you currently have as "non-silent"

Utorrent silent

AdobeReader_v10.12

Shockwave_Full + adobe_flash_activex + adobe_flash_plugin

K-Lite_CodecPack_Full_v8.32 (well, it's a maker tool)

MiniLyrics Well, indirectly itss WMP lyrics plugin

I could not find auslogics disk defrag. Maybe I can made one for you...inf type. Gonna take some time to make.

There is defragger as an alternative by the way.

To make K-Lite Pack silent, you need to run it from Command Prompt with a -makeunattended switch. It's all documented.

Hi Geej & Hi Sp0iledBrat:

Geej thank you for your links to the various software that was nice of you.

I did have a silent version of Auslogics but it installed the Ask toolbar so then I made the non-silent version. I also have Defraggler too but prefer Auslogics as you can defrag more than one drive at a time.

Sp0iledBrat I know how to make silent CABS. The reason I make the Non-silent ones is because I DON'T want the toolbars that will install if you do a silent install. It would be wonderful if ALL apps had different installer versions of their software like CCleaner. They have the CCleaner regular version; toolbar included, CCleaner portable version and my favorite the CCleaner Slim without the toolbar which is the version that I use when making my CAB for that app.

If I could make a silent install that would allow me to install the various software WITHOUT the toolbar then that would be great unfortunately that's not an option or maybe it is and I just don't know how to do it. So I will just have to stick with my Non-silent CABs as I would rather just install it the regular way than have fifty-bizillion unwanted toolbars.

Thanks again,

Link to comment
Share on other sites
Sp0iLedBrAt

Sp0iLedBrAt

Posted
Posted
The reason I make the Non-silent ones is because I DON'T want the toolbars that will install if you do a silent install.

I know exactly how you feel; however, I spent some time and found out that certain applications do NOT install toolbars when installed silently thumbup.gif I'm sorry I can't provide examples, it's been a while since my last nLite experience.

Cheers

Link to comment
Share on other sites
lapetite66

lapetite66

Posted
  • Author
Posted
The reason I make the Non-silent ones is because I DON'T want the toolbars that will install if you do a silent install.

I know exactly how you feel; however, I spent some time and found out that certain applications do NOT install toolbars when installed silently thumbup.gif I'm sorry I can't provide examples, it's been a while since my last nLite experience.

Cheers

Sp0ilLedBrAt:

Are you sure about that a silent install won't install???

How about when .ini file? Can I open it open and edit it to say "Hey don't install the dang toolbar" or else. Just kidding about the or else part :)

Link to comment
Share on other sites
lapetite66

lapetite66

Posted
  • Author
Posted

Hi everyone:

I found the problem and it wasn't the Auslogic Disk-Defrag cab!!!

Is it possible that during the making of one of those cabs, you mistakenly inverted something and place a file from (/reference to) diskdefrag ?

It was just as Ponch said that I mistakenly placed a reference to diskdefrag...in another file. :blushing:

I was adding the cabs, four at a time and everything was fine. Then I added the next four and then I got that bloody error. So then I went back and added the last four that I was adding when the error occurred but this time I added them one at a time. The culprit was the Axcrypt Cab.

ENTRIES_AXCRYPT_V1.7.2867.0_SILENT.ini

[General]

builddate=

description=

language=Language Neutral

title=AxCrypt

version=

website=

[EditFile]

disk-defrag-setup.exe

toolbar=no

[AddProgram]

AxCrypt_v1.7.2867.0_Silent.exe

Please don't ask me how this happened because for the life of me I don't know. However, I do remember that I at one point I opened up the entries.ini file of Auslogics or what I thought was Auslogics because I was going to attempt to "edit" the ENTRIES_.INI file, but how that editing ended up in the Axcrypt entries_ini file as opposed to the Auslogics entries_ini is a mystery. The only explanation is it was one of those nights when I was trying to multi-task when I was overly tired and should have left well-enough alone.

I remade the Axcrypt file and tested it and it installed without a hitch. I then tested all the CABs on a fresh source and they all installed without any problems.

I want to thank everyone for all their patience, helpful advice and suggestions etc. :D

Link to comment
Share on other sites
Geej

Geej

Posted
Posted

Glad you found out the problem cab!

With all due respect to Kali, just tested his uploaded Auslogics Disk Defrag addon on my Virtualbox. Although it installed silently, the crapware also installed silently, something which you do not want. There is no autoitscript to remove those crapware.

Kali might have missed your tread why you prefer to make your addon "non-silent".

I have made this Auslogics Disk Defrag silent addon without Auslogics Toolbar & Auslogics Toolbar Updater using inf script. Includes Start Menu shortcut only.

Also have "Defragment with Disk Defrag" context menu by default.

By default, only English lng file are copied during installation. Rest of lang files are excluded during installation but is available in the cab package for any user who might wish to install other than English langauge.

Uninstallable from Add/Remove panel.

If you wish to install manually, just uncab, right click on the inf file, choose "install".

Lastly, if you have already have an existing Auslogics Disk Defrag installed, please uninstall it first (and reboot if necessary) before installing this one.

The inf uninstaller work differently for an exe uninstaller.

Just to be sure, please test my addon on VM first.

Auslogics_Disk_Defrag_3302_inf_addon.cab

Size: 2.31 Mb (2,420,878 bytes)

MD5: 4DDCA99AC702B9F633D465AC2E735F94

(Will host for 7 days)

Forgot: Spywareblaster silent addon can be found here

:)

Link to comment
Share on other sites
lapetite66

lapetite66

Posted
  • Author
Posted

Glad you found out the problem cab!

With all due respect to Kali, just tested his uploaded Auslogics Disk Defrag addon on my Virtualbox. Although it installed silently, the crapware also installed silently, something which you do not want. There is no autoitscript to remove those crapware.

Kali might have missed your tread why you prefer to make your addon "non-silent".

I have made this Auslogics Disk Defrag silent addon without Auslogics Toolbar & Auslogics Toolbar Updater using inf script. Includes Start Menu shortcut only.

Also have "Defragment with Disk Defrag" context menu by default.

By default, only English lng file are copied during installation. Rest of lang files are excluded during installation but is available in the cab package for any user who might wish to install other than English langauge.

Uninstallable from Add/Remove panel.

If you wish to install manually, just uncab, right click on the inf file, choose "install".

Lastly, if you have already have an existing Auslogics Disk Defrag installed, please uninstall it first (and reboot if necessary) before installing this one.

The inf uninstaller work differently for an exe uninstaller.

Just to be sure, please test my addon on VM first.

Auslogics_Disk_Defrag_3302_inf_addon.cab

Size: 2.31 Mb (2,420,878 bytes)

MD5: 4DDCA99AC702B9F633D465AC2E735F94

(Will host for 7 days)

Forgot: Spywareblaster silent addon can be found here

:)

Hi Geej:

No offense to Kali... the files that I made non-silent were originally silent and they installed...and so did their toolbars. That's why when I find a piece of software I test it via the virtual machine or the Sandbox to see whether or not it wants to install a toolbar and then I decide to which version of CAB to make; silent or non-silent.

Thank you for the CABs. I tested them in my virtual machine and both the Auslogics Disk-Defrag and Spyware Blaster installed without a hitch and without toolbars.

How did you remove the toolbars? Is there a piece of software that would allow me to do that so that I could make my own toolbar-less CABS?

Thanks again! :thumbup

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...