bill4d Posted February 11, 2011 Share Posted February 11, 2011 I have an old version of 3D Studio MAX v3.1, that I purchased legally, and do have the serial number. The problem is, my new computer obviously does not have a parallel port for the dongle to attach to.Is it possible to use a parallel to USB cable adapter to make the dongle function properly?I checked and there is such a cable made.Thanks for any help. Link to comment Share on other sites More sharing options...
allen2 Posted February 11, 2011 Share Posted February 11, 2011 Should ask your retailer before as it might not work. Link to comment Share on other sites More sharing options...
puntoMX Posted February 11, 2011 Share Posted February 11, 2011 You could also add a PCI card to your PC with that port, unless you have a notebook.That program is old, I stopped using it 18 years ago but learned the 3D part with it as ACAD 12/13 had such a crap 3D interface. (edit: my bad, we are talking about MAX and not about 3D studio 3.x / 4.x without the MAX and not made for DOS). Link to comment Share on other sites More sharing options...
bill4d Posted February 11, 2011 Author Share Posted February 11, 2011 You could also add a PCI card to your PC with that port, unless you have a notebook.That program is old, I stopped using it 18 years ago but learned the 3D part with it as ACAD 12/13 had such a crap 3D interface.I definately don't want to add a PCI card just to get this software working. I'd rather go the dongle emulator route first.I'm just not sure if the USB - Parallel port converter cable will function like I need it to.The program is actually not old. There is a 2011 version. My version is old, but it is the same basic program as their later released versions. Link to comment Share on other sites More sharing options...
puntoMX Posted February 11, 2011 Share Posted February 11, 2011 I think you'll better do trail and error and buy at a shop where you can return the product; some cable work, some don't but I can't tell you what model does, and what model doesn't. Hard to say as you won't know what communication chip is used .By the way, I didn't see the "MAX" placed in your first post, my bad. Link to comment Share on other sites More sharing options...
bill4d Posted February 12, 2011 Author Share Posted February 12, 2011 No problem. I guess I'll just try a cable adapter first as it's only $10-$20. If that doesn't work I guess I'll have go to someone that makes dongle emulator software. Link to comment Share on other sites More sharing options...
jaclaz Posted February 12, 2011 Share Posted February 12, 2011 It is *possible*, but HIGHLY UNlikely.The USB to Parallel cables are "USB to Parallel" cables they are designed NOT as a full bi-directional converter between USB and IEEE 1284, they usually provide only a "subset" of the protocol.Compare with:http://www.keil.com/support/docs/2866.htmAnd with:http://www-user.tu-chemnitz.de/~heha/bastelecke/Rund%20um%20den%20PC/USB2LPT/index.html.en(that may actually work)jaclaz Link to comment Share on other sites More sharing options...
bonestonne Posted February 19, 2011 Share Posted February 19, 2011 FWIW, I did set up an old HP LaserWriter 5 printer (parallel only) with a brand new Mac Pro using a USB to Parellel adapter. Granted, yes, it's just sending the print job, but it did work. The first adapter died actually, not sure why, but swapping the adapter for a new one brought the setup back to life, and so far it's working.Not guaranteed to work for you though, you're looking to do more than the adapters are really meant to do. It may work with reduced functionality though, but it's hard to say. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now